Subcommittees and Standards

Showing results 1-15 of 15 matching ACTIVE standards under the jurisdiction of E06.41     E06 Home

E241-08 Standard Guide for Limiting Water-Induced Damage to Buildings
    See also WK22905 proposed revision

E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

E779-03 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
    See also WK15229 proposed revision

E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

E1258-88(2008) Standard Test Method for Airflow Calibration of Fan Pressurization Devices

E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
    See also WK14118 proposed revision

E1554-07 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

E1677-05 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls

E1827-96(2007) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

E1998-02(2007) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

E2121-08 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
    See also WK19833 proposed revision
    See also WK20061 proposed revision
    See also WK23245 proposed revision

E2178-03 Standard Test Method for Air Permeance of Building Materials
    See also WK19511 proposed revision
    See also WK25813 proposed revision
    See also WK25814 proposed revision
    See also WK25815 proposed revision
    See also WK25816 proposed revision

E2342-03 Standard Test Method for Durability Testing of Duct Sealants
    See also WK19396 proposed revision

E2357-05 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
    See also WK19513 proposed revision

Showing results 1-9 of 9 matching Proposed New Standards under the jurisdiction of E06.41     E06 Home

WK16958 Fluid-Applied Air Barrier Materials

WK320 Documentation of Hygrothermal Models for Moisture Control Design in Building Envelope

WK5580 Identifying Air Leakage Locations by Fan Pressurization and the Introduction of Theatrical Fog

WK7774 Building Enclosure System Materials, Assemblies, and Systems

WK11197 Air Barrier Materials--Medium-Density Closed-Cell Rigid Spray Polyurethane Foam

WK11199 Self-Adhering Air Barrier Materials

WK18674 Air Permeance of Building Materials on Substrates

WK25823 Assessing the Airtightness of Penetrations through Air-tight Assemblies

WK23911 Assessing the Airtightness of Joints Between Air-tight Assemblies

Back to the Main Committee Page