Login
Site Map
|
Online Support
|
Contact
|
Web Policies
|
IP Policy
Site
Search
Standards Search: ISO
ANS/IEC60601.2.12-01 Medical Electrical Equipment—Part 2-12; Particular Requirements for the Safety of Lung Ventilators—Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International
ANSI/ISO21647-04 Medical Electrical Equipment—Particular Requirements for the Basic Safety and Essential Performance of Respiratory Gas Monitors
ANS/ISO7767-97 Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements (NOTICE: This standard has been withdrawn and replaced by ANSI/ISO 21647. Contact ASTM International (www.astm.org) for the latest information.)
ANS/ISO4135-01 Anaesthetic and Respiratory Equipment— Vocabulary Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.1-99 Medical Suction Equipment—Part 1: Electrically Powered Suction Equipment—Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.2-99 Medical Suction Equipment—Part 2: Manually Powered Suction Equipment Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.3-99 Medical Suction Equipment—Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International
ANS/ISO1522-98(E) Paints and Varnishes—Pendulum Damping Test Approved as an American National Standard by ASTM International
ANS/ISO5359-00E Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by ASTM International
ANS/ISO5361-99 Anaesthetic and Respiratory Equipment—Tracheal Tubes and Connectors Approved as an American National Standard by ASTM International
ANS/ISO5366.1-00E Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 1: Tubes and Connectors for Use in Adults Approved as an American National Standard by ASTM International
ANS/ISO5362-00 Anaesthetic Reservoir Bags Approved as an American National Standard by ASTM International
ANS/ISO11195-95 Gas Mixers for Medical Use—Stand-alone Gas Mixers Approved as an American National Standard with Deviations by ASTM international
ANS/ISO5360-93 Anesthetic Vaporizes—Agent-Specific Filling Systems Approved as an American National Standard with Deviations by ASTM International
ANS/ISO15002-00 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC17024-03 Conformity assessment—General requirements for bodies operating certification of persons
ANSI/ISO10651.4-02 Lung Ventilators
ANSI/ISO10651.5-06 Lung Ventilators for Medical Use - Particular Requirements for Basic Safety - and Essential Performance
ANSI/ISO/IEC17011-05 Conformity assessmen—General requirements for accreditation bodies accrediting conformity assessment bodies
ANSI/ISO/IEC17020-98 General criteria for the operation of various types of bodies performing inspection
ISO64-97 Guide for inclusion of environmental aspects in product standards
ISO5356-04 Anaesthetic and respiratory equipment—Conical connectors—Part 1: Cones and sockets
ISO5366.3-03 Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 3: Paediatric Tracheostomy Tubes
ISO9000-00 Quality management systems - Fundamentals and vocabulary
ISO9001-00 Quality management systems - Requirements
ISO9004-00 Quality management systems - Guidelines for performance improvements
ISO9919-05 Medical Electrical Equipment—Particular Requirements for the Basic Safety and Essential Performance of Pulse Oximeter Equipment for Medical Use
ISO14001-04 Environmental management systems—Requirements with guidance for use
ISO14004-04 Environmental management systems—General guidelines on principles, systems and supporting techniques
ISO14010-96 Guidelines for environmental auditing--General principles
ISO14011-96 Guidelines for environmental auditing--Audit procedures--Auditing of environmental management systems
ISO14012-96 Guidelines for environmental auditing--Qualification criteria for environmental auditors
ISO14020-00 Environmental labels and declarations - General principles
ISO14021-99 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)
ISO14024-01 Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures
ISO14025-00 Technical Report - Environmental labels and declarations - Type III environmental declarations
ISO14031-99 Environmental management - Environmental performance evaluation - Guidelines
ISO14032-99 Technical Report - Environmental management - Examples of environmental performance evaluation (EPE)
ISO14040-97 Environmental management - Life cycle assessment - Principles and framework
ISO14041-98 Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis
ISO14042-00 Environmental management - Life cycle assessment - Life cycle impact assessment
ISO14043-00 Environmental management - Life cycle assessment - Life cycle interpretation
ISO14050-98 Environmental management - Vocabulary
ISO14061-98 Technical Report - Information to assist forestry organizations in the use of Environmental Management System standards ISO 14001and ISO 14004
ISO17025-99 General requirements for the competence of testing and calibration laboratories
ISO/ASTM51204-02 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ISO/ASTM51204-04 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ISO/ASTM51205-02 Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
ISO/ASTM51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ISO/ASTM51275-02 Standard Practice for Use of a Radiochromic Film Dosimetry System
ISO/ASTM51275-04 Standard Practice for Use of a Radiochromic Film Dosimetry System
ISO/ASTM51276-02 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
ISO/ASTM51310-02 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
ISO/ASTM51310-04 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
ISO/ASTM51400-02 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ISO/ASTM51400-03 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ISO/ASTM51401-02 Standard Practice for Use of a Dichromate Dosimetry System
ISO/ASTM51401-03 Standard Practice for Use of a Dichromate Dosimetry System
ISO/ASTM51431-02 Standard Practice for Dosimetry in Electron and bremsstrahlung Irradiation Facilities for Food Processing
ISO/ASTM51431-05 Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing
ISO/ASTM51538-02 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ISO/ASTM51539-02 Standard Guide for Use of Radiation-Sensitive Indicators
ISO/ASTM51539-05 Standard Guide for Use of Radiation-Sensitive Indicators
ISO/ASTM51540-02 Standard Practice for Use of a Radiochromic Liquid Dosimetry System
ISO/ASTM51540-04 Standard Practice for Use of a Radiochromic Liquid Dosimetry System
ISO/ASTM51607-02 Standard Practice for Use of the Alanine-EPR Dosimetry System
ISO/ASTM51607-04 Standard Practice for Use of the Alanine-EPR Dosimetry System
ISO/ASTM51608-02 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ISO/ASTM51608-05 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ISO/ASTM51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ISO/ASTM51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ISO/ASTM51649-02 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
ISO/ASTM51649-05 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
ISO/ASTM51650-02 Standard Practice for Use of Cellulose Acetate Dosimetry Systems
ISO/ASTM51650-05 Standard Practice for Use of Cellulose Acetate Dosimetry Systems
ISO/ASTM51702-02 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ISO/ASTM51702-04 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ISO/ASTM51707-02 Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
ISO/ASTM51707-05 Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
ISO/ASTM51818-02 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
ISO/ASTM51900-02 Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products
ISO/ASTM51939-02 Standard Practice for Blood Irradiation Dosimetry
ISO/ASTM51939-05 Standard Practice for Blood Irradiation Dosimetry
ISO/ASTM51940-02 Standard Guide for Irradiation of Insects for Sterile Release Programs
ISO/ASTM51940-04 Standard Guide for Irradiation of Insects for Sterile Release Programs
ISO/ASTM51956-02 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ISO/ASTM51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ISO/ASTM52116-02 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
