Digital Library / Special Technical Papers (STPs)

Gain insight into the technology and developments leading to new standards. Special Technical Publications (STPs) are collections of peer-reviewed papers, usually presented at symposia sponsored by ASTM's 140 technical committees.



All Published STPs

STP1504 Roofing Research and Standards Development: 6th Volume
STP1501 Automotive Lubricant Testing and Advanced Additive Development
STP1499 Dimension Stone Use in Building Construction
STP1497 Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results into Design
STP1496 Masonry
STP1495 Heat-Air-Moisture Transport: Measurements on Building Materials
STP1494 Natural Cement
STP1491 Engine Coolant Technologies: 5th Volume
STP1490 Reactor Dosimetry: 12th International Symposium
STP1489 Oxidation and the Testing of Turbine Oils
STP1488 Durability of Building and Construction Sealants and Adhesives: 2nd Volume
STP1487 Structural Integrity of Fasteners Including the Effects of Environment and Stress Corrosion Cracking: 3rd Volume
STP1486 Pavement Surface Condition/Performance Assessment: Reliability and Relevancy of Procedures and Technologies
STP1484 Performance and Durability of the Window-Wall Interface
STP1482 Contaminated Sediments: Evaluation and Remediation Techniques
STP1481 Fatigue and Fracture of Medical Metallic Materials and Devices
STP1480 Fatigue and Fracture Mechanics: 35th Volume
STP1479 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eleventh Volume
STP1476 Pendulum Impact Machines: Procedures and Specimens
STP1475 Effects of Radiation on Materials: 22nd Symposium
STP1474 Skiing Trauma and Safety: Sixteenth Volume
STP1473 Beryllium: Sampling and Analysis
STP1472 Wear of Articulating Surfaces: Understanding Joint Simulation
STP1471 Titanium, Niobium, Zirconium, and Tantalum for Medical and Surgical Applications
STP1470 Pesticide Formulations and Delivery Systems, 25th Volume: Advances in Crop Protection Technologies
STP1469 Performance Tests for Hot Mix Asphalt (HMA) Including Fundamental and Empirical Procedures
STP1468 Elemental Analysis of Fuels and Lubricants: Recent Advances and Future Prospects
STP1467 Zirconium in the Nuclear Industry: Fourteenth International Symposium
STP1466 Techniques in Thermal Analysis: Hyphenated Techniques, Thermal Analysis of the Surface, and Fast Rate Analysis
STP1465 Bearing Steel Technology-Advances and State of the Art in Bearing Steel Quality Assurance: 7th Volume
STP1464 Skiing Trauma and Safety: Fifteenth Volume
STP1463 Advances in Adhesives, Adhesion Science, and Testing
STP1462 Performance of Protective Clothing: Global Needs and Emerging Markets: 8th Volume
STP1461 Fatigue and Fracture Mechanics, 34th Volume
STP1460 Pesticide Formulations and Delivery Systems: The Continued Evolution of Agrochemicals, 24th Volume
STP1459 Innovations in Controlled Low-Strength Material (Flowable Fill)
STP1458 Landscape Ecology and Wildlife Habitat Evaluation: Critical Information for Ecological Risk Assessment, Land-Use Management Activities, and Biodiversity Enhancement
STP1456 Advances in Geosynthetic Clay Liner Technology: 2nd Symposium
STP1455 Joining and Repair of Composite Structures
STP1454 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: 10th Volume
STP1453 Durability of Building and Construction Sealants and Adhesives
STP1452 Tissue Engineered Medical Products (TEMPs)
STP1451 Roofing Research and Standards Development: 5th Volume
STP1450 Probabilistic Aspects of Life Prediction
STP1449 Pesticide Formulations and Application Systems: 23rd Volume
STP1448 Technology of Floor Maintenance and Current Trends
STP1447 Effects of Radiation on Materials: 21st International Symposium
STP1446 Safety in Ice Hockey: Fourth Volume
STP1445 Crosslinked and Thermally Treated Ultra-High Molecular Weight Polyethylene for Joint Replacements
STP1444 Building Facade Maintenance, Repair, and Inspection
STP1443 Multiple Stressor Effects in Relation to Declining Amphibian Populations
STP1442 Contaminated Sediments: Characterization, Evaluation, Mitigation/Restoration, and Management Strategy Performance
STP1440 Skiing Trauma and Safety: Fourteenth Volume
STP1439 Fatigue Testing and Analysis Under Variable Amplitude Loading Conditions
STP1438 Stainless Steels for Medical and Surgical Applications
STP1437 Resilient Modulus Testing for Pavement Components
STP1436 Composite Materials: Testing and Design, Fourteenth Volume
STP1434 The Use of Glass in Buildings
STP1433 Constructing Smooth Hot Mix Asphalt (HMA) Pavements
STP1432 Masonry: Opportunities for the 21st Century
STP1431 Spinal Implants: Are We Evaluating Them Appropriately?
STP1430 Pesticide Formulations and Delivery Systems: Meeting the Challenges of the Current Crop Protection Industry
STP1429 Predictive Material Modeling: Combining Fundamental Physics Understanding, Computational Methods and Empirically Observed Behavior
STP1428 Thermomechanical Fatigue Behavior of Materials: 4th Volume
STP1427 Thermal Measurements: The Foundation of Fire Standards
STP1426 Insulation Materials: Testing and Applications: 4 Volume
STP1425 Fretting Fatigue: Advances in Basic Understanding and Applications
STP1424 Metrology of Pedestrian Locomotion and Slip Resistance
STP1423 Zirconium in the Nuclear Industry: Thirteenth International Symposium
STP1422 Performance of Exterior Building Walls
STP1421 Outdoor Atmospheric Corrosion
STP1420 Spatial Methods for Solution of Environmental and Hydrologic ProblemsScience, Policy, and Standardization
STP1419 Bearing Steel Technology
STP1418 Small Specimen Test Techniques: Fourth Volume
STP1417 Fatigue & Fracture Mechanics: 33rd Volume
STP1416 Composite Materials: Testing, Design, and Acceptance Criteria
STP1415 Evaluation and Remediation of Low Permeability and Dual Porosity Environments
STP1414 Pesticide Formulations and Application Systems: A New Century for Agricultural Formulations, Twenty First Volume
STP1413 Mechanical Properties of Structural Films
STP1412 Aggregate Contribution to Hot Mix Asphalt (HMA) Performance
STP1411 Applications of Automation Technology in Fatigue and Fracture Testing and Analysis: Fourth Volume
STP1409 Fracture Resistance Testing of Monolithic and Composite Brittle Materials
STP1408 Isocyanates: Sampling, Analysis, and Health Effects
STP1407 Turbine Lubrication in the 21st Century
STP1406 Fatigue and Fracture Mechanics: 32nd Volume
STP1405 Effects of Radiation on Materials: 20th International Symposium
STP1404 Bench Testing of Industrial Fluid Lubrication and Wear Properties Used in Machinery Applications
STP1403 Environmental Toxicology and Risk Assessment: Science, Policy, and StandardizationImplications for Environmental Decisions: Tenth Volume
STP1402 Materials Characterization by Dynamic and Modulated Thermal Analytical Techniques
STP1401 Environmentally Assisted Cracking: Predictive Methods for Risk Assessment and Evaluation of Materials, Equipment, and Structures
STP1400 Pesticide Formulations and Application Systems: Twentieth Volume
STP1399 Marine Corrosion in Tropical Environments
STP1398 Reactor Dosimetry: Radiation Metrology and Assessment
STP1397 Skiing Trauma and Safety: Thirteenth Volume
STP1396 Synthetic Bioabsorbable Polymers for Implants
STP1395 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Ninth Volume
STP1394 Dimension Stone Cladding: Design, Construction, Evaluation, and Repair
STP1393 Air Quality and Comfort in Airliner Cabins
STP1392 Mechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components
STP1391 Structural Integrity of Fasteners: Second Volume
STP1390 Testing and Performance of Geosynthetics in Subsurface Drainage
STP1389 Fatigue and Fracture Mechanics: 31st Volume
STP1388 Oil Flow Studies at Low Temperatures in Modern Engines
STP1387 Multiaxial Fatigue and Deformation: Testing and Prediction
STP1386 Performance of Protective Clothing: Issues and Priorities for the 21 Century: Seventh Volume
STP1385 Durability 2000: Accelerated and Outdoor Weathering Testing
STP1384 Constructing and Controlling Compaction of Earth Fills
STP1383 Composite Structures: Theory and Practice
STP1382 Gate Dielectric Integrity: Material, Process, and Tool Qualification
STP1381 Environmental Toxicology and Risk Assessment: Recent Achievements in Environmental Fate and Transport: Ninth Volume
STP1380 Pendulum Impact Testing: A Century of Progress
STP1379 Grips, Clamps, Clamping Techniques, and Strain Measurement for Testing of Geosynthetics
STP1378 Hot Mix Asphalt Construction: Certification and Accreditation Programs
STP1377 ASTM's Role in Performance-Based Fire Codes and Standards
STP1376 Electrical Insulating Materials: International Issues
STP1375 Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume
STP1374 Geotechnics of High Water Content Materials
STP1373 Pesticide Formulations and Application Systems: Global Pest Control Formulations for the Next Millennium: Nineteenth Volume
STP1372 Fatigue Crack Growth Thresholds, Endurance Limits, and Design
STP1371 Thermo-mechanical Fatigue Behavior of Materials: Third Volume
STP1370 Designing Cathodic Protection Systems for Marine Structures and Vehicles
STP1369 Limitations of Test Methods for Plastics
STP1368 Concrete Pipe for the New Millennium
STP1367 Fretting Fatigue: Current Technology and Practices
STP1366 Effects of Radiation on Materials: 19th International Symposium
STP1365 Cobalt-Base Alloys for Biomedical Applications
STP1364 Environmental Toxicology and Risk Assessment: Standardization of Biomarkers for Endocrine Disruption and Environmental Assessment: 8th Volume
STP1362 Wear Processes in Manufacturing
STP1361 Advances in the Production and Use of Steel with Improved Internal Cleanliness
STP1360 Fatigue and Fracture Mechanics: 30th Volume
STP1359 Mixed-Mode Crack Behavior
STP1358 Field Instrumentation for Soil and Rock
STP1357 Time Dependent and Nonlinear Effects in Polymers and Composites
STP1356 Masonry: Materials, Testing, and Applications
STP1355 The Use of and Need for Preservation Standards in Architectural Conservation
STP1354 Zirconium in the Nuclear Industry: Twelfth International Symposium
STP1353 Acoustic Emission: Standards and Technology Update
STP1352 Water Problems in Building Exterior Walls: Evaluation, Prevention, and Repair
STP1351 Wood Structures: A Global Forum on the Treatment, Conservation, and Repair of Cultural Heritage
STP1350 Nondestructive and Automated Testing for Soil and Rock Properties
STP1349 Roofing Research and Standards Development: Fourth Volume
STP1348 Flexible Pavement Rehabilitation and Maintenance
STP1347 Pesticide Formulations and Application Systems: Eighteenth Volume
STP1346 Alternative Bearing Surfaces in Total Joint Replacement
STP1345 Skiing Trauma and Safety: Twelfth Volume
STP1344 Applications of Inductively Coupled Plasma-Mass Spectrometry to Radionuclide Determinations
STP1343 Advances in Fatigue Crack Closure Measurement and Analysis: Second Volume
STP1342 Advances in Environmental Measurement Methods for Asbestos
STP1341 Safety in Ice Hockey: Third Volume
STP1340 Recombination Lifetime Measurements in Silicon
STP1339 Hydraulic Failure Analysis: Fluids, Components, and System Effects
STP1338 Superfund Risk Assessment in Soil Contamination Studies: Third Volume
STP1337 Effects of Product Quality and Design Criteria on Structural Integrity
STP1336 Very Large-Scale Fires
STP1335 Engine Coolant Testing: Fourth Volume
STP1334 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: 7th Volume
STP1333 Environmental Toxicology and Risk Assessment: Seventh Volume
STP1332 Fatigue and Fracture Mechanics: 29th Volume
STP1331 The Design and Application of Controlled Low-Strength Materials (Flowable Fill)
STP1330 Composite Materials: Fatigue and Fracture: 7th Volume
STP1329 Small Specimen Test Techniques
STP1328 Pesticide Formulations and Application Systems: 17th Volume
STP1327 Bearing Steels: Into the 21st Century
STP1326 Oxidative Behavior of Materials by Thermal Analytical Techniques
STP1325 Effects of Radiation on Materials: 18th International Symposium
STP1324 Site Characterization and Design of On-Site Septic Systems
STP1323 Nontraditional Methods of Sensing Stress, Strain, and Damage in Materials and Structures
STP1322 Progress of Superpave (Superior Performing Asphalt Pavement): Evaluation and Implementation
STP1321 Fatigue and Fracture Mechanics: 28th Volume
STP1320 Insulation Materials: Testing and Applications, 3rd Volume
STP1319 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eighth Volume
STP1318 Nontraditional Methods of Sensing Stress, Strain, and Damage in Materials and Structures
STP1317 Environmental Toxicology and Risk Assessment: Modeling and Risk Assessment Sixth Volume
STP1316 Creative Applications: Sensory Techniques Used in Conducting Packaging Research with Consumers
STP1315 Applications of Continuum Damage Mechanics to Fatigue and Fracture
STP1314 Water Leakage Through Building Facades
STP1313 International Symposium on Safety in Baseball/Softball
STP1312 Pesticide Formulations and Application Systems: 16th Volume
STP1311 Computerization and Networking of Materials Databases: Fifth Volume
STP1310 Tribology of Hydraulic Pump Testing
STP1309 Thermal and Mechanical Test Methods and Behavior of Continuous-Fiber Ceramic Composites
STP1308 Testing and Acceptance Criteria for Geosynthetic Clay Liners
STP1307 Characterization and Properties of Ultra-High Molecular Weight Polyethylene
STP1306 Environmental Toxicology and Risk Assessment: Biomarkers and Risk Assessment: Fifth Volume
STP1305 Safety in American Football
STP1304 M3D III: Mechanics and Mechanisms of Material Damping
STP1303 Applications of Automation Technology to Fatigue and Fracture Testing and Analysis: Third Volume
STP1302 High Temperature and Environmental Effects on Polymeric Composites: 2nd Volume
STP1301 Modularity of Orthopedic Implants
STP1300 Corrosion Testing in Natural Waters: Second Volume
STP1299 Quality Management of Hot Mix Asphalt
STP1298 Effects of the Environment on the Initiation of Crack Growth
STP1297 Elevated Temperature Effects on Fatigue and Fracture
STP1296 Fatigue and Fracture Mechanics: 27th Volume
STP1295 Zirconium in the Nuclear Industry: Eleventh International Symposium
STP1294 Durability Testing of Nonmetallic Materials
STP1293 Dredging, Remediation, and Containment of Contaminated Sediments
STP1292 Advances in Fatigue Lifetime Predictive Techniques: 3rd Volume
STP1291 Applications of Inductively Coupled Plasma-Mass Spectrometry to Radionuclide Determinations
STP1290 Fiber, Matrix, and Interface Properties
STP1289 Skiing Trauma and Safety: Eleventh Volume
STP1288 Subsurface Fluid-Flow (Ground-Water and Vadose Zone) Modeling
STP1287 Characterizing Sources of Indoor Air Pollution and Related Sink Effects
STP1286 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Sixth Volume
STP1285 Composite Materials: Fatigue and Fracture (Sixth Volume)
STP1284 Fire Resistance of Industrial Fluids
STP1283 Geostatistics for Environmental and Geotechnical Applications
STP1282 Sampling Environmental Media
STP1281 Recent Developments in Geotextile Filters and Prefabricated Drainage Geocomposites
STP1280 Multiaxial Fatigue and Deformation Testing Techniques
STP1279 Remote Sensing and GIS for Site Characterization: Applications and Standards
STP1278 Effect of Surface Coatings and Treatments on Wear
STP1277 Electrochemical Noise Measurement for Corrosion Applications
STP1276 Techniques to Assess the Corrosion Activity of Steel Reinforced Concrete Structures
STP1275 Testing Soil Mixed with Waste or Recycled Materials
STP1274 Composite Materials: Testing and Design: Twelfth Volume
STP1273 Performance of Protective Clothing: Sixth Volume
STP1272 Medical Applications of Titanium and Its Alloys: The Material and Biological Issues
STP1271 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fifth Volume
STP1270 Effects of Radiation on Materials: 17th International Symposium
STP1269 Exterior Insulation Finish Systems (EIFS): Materials, Properties, and Performance
STP1268 Pesticide Formulations and Application Systems: 15th Volume
STP1267 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Seventh Volume
STP1266 Skiing Trauma and Safety: Tenth Volume
STP1265 Engineering Properties of Asphalt Mixtures and the Relationship to their Performance
STP1264 Superfund Risk Assessment in Soil Contamination Studies: Second Volume
STP1263 Thermomechanical Fatigue Behavior of Materials: Second Volume
STP1262 Environmental Toxicology and Risk Assessment: Fourth Volume
STP1261 Volatile Organic Compounds in the Environment
STP1260 Validation Practices for Biotechnology Products
STP1259 Steel Forgings: Second Volume
STP1258 Standards for Preservation and Rehabilitation
STP1257 Computerization and Networking of Materials Databases: Fourth Volume
STP1256 Fracture Mechanics: 26th Volume
STP1255 Airflow Performance of Building Envelopes, Components, and Systems
STP1254 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: 3rd Volume
STP1253 Life Prediction Methodology for Titanium Matrix Composites
STP1252 The Use of Chemicals in Oil Spill Response
STP1251 Special Applications and Advanced Techniques for Crack Size Determination
STP1250 Case Studies for Fatigue Education
STP1249 Assignment of the Glass Transition
STP1248 Pendulum Impact Machines: Procedures and Specimens for Verification
STP1247 Effects of Mechanical Stiffness and Vibration on Wear
STP1246 Masonry: Esthetics, Engineering, and Economy
STP1245 Zirconium in the Nuclear Industry: Tenth International Symposium
STP1244 Constraint Effects in Fracture Theory and Applicatons: Second Volume
STP1243 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fourth Volume
STP1242 Composite Materials: Testing and Design, Thirteenth Volume
STP1241 Physical Properties of Asphalt Cement Binders
STP1240 Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes: 3rd Volume
STP1239 Atmospheric Corrosion
STP1238 Cyclic Cabinet Corrosion Testing
STP1237 Performance of Protective Clothing: Fifth Volume
STP1236 Structural Integrity of Fasteners
STP1235 Bioremediation of Pollutants in Soil and Water
STP1234 Pesticide Formulations and Application Systems: Fourteenth Volume
STP1233 Fire and Flammability of Furnishings and Contents of Buildings
STP1232 Microbiologically Influenced Corrosion Testing
STP1231 Automation in Fatigue and Fracture: Testing and Analysis
STP1230 Composite Materials: Fatigue and Fracture: Fifth Volume
STP1229 Head and Neck Injuries in Sports
STP1228 Reactor Dosimetry
STP1227 Composites Bonding
STP1226 Lead in Paint, Soil and Dust: Health Risks, Exposure Studies, Control Measures, Measurement Methods, and Quality Assurance
STP1225 Vehicle-Road Interaction
STP1224 Roofing Research and Standards Development: 3rd Volume
STP1223 Standardizing and Harmonizing Terminology: Theory and Practice
STP1222 Buried Plastic Pipe Technology: 2nd Volume
STP1221 Analysis of Soils Contaminated with Petroleum Constituents
STP1220 Fracture Mechanics: 25th Volume
STP1219 Exxon Valdez Oil Spill: Fate and Effects in Alaskan Waters
STP1218 Environmental Toxicology and Risk Assessment: Third Volume
STP1217 Clinical and Laboratory Performance of Bone Plates
STP1216 Environmental Toxicology and Risk Assessment: Second Volume
STP1215 Petrography of Cementitious Materials
STP1214 Computerized Chemical Data Standards: Databases, Data Interchange, and Information Systems
STP1213 Dynamic Geotechnical Testing II
STP1212 Safety in Ice Hockey: Second Volume
STP1211 Advances in Fatigue Lifetime Predictive Techniques: Second Volume
STP1210 Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications
STP1209 Quality and Statistics: Total Quality Management
STP1208 Automation of Mechanical Testing
STP1207 Fracture Mechanics: Twenty-Fourth Volume
STP1206 Eleventh Volume: Composite MaterialsTesting and Design
STP1205 Modeling of Indoor Air Quality and Exposure
STP1204 Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension
STP1203 Fractography of Modern Engineering Materials: Composites and Metals, Second Volume
STP1202 Accelerated and Outdoor Durability Testing of Organic Materials
STP1201 Life Prediction Methodologies and Data for Ceramic Materials
STP1200 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Second Volume
STP1199 Tribology: Wear Test Selection for Design and Application
STP1198 Nondestructive Testing of Pavements and Backcalculation of Moduli: Second Volume
STP1197 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Sixth Volume
STP1196 Characterization and Performance of Calcium Phosphate Coatings for Implants
STP1195 Creative Use of Bearing Steels
STP1194 Application of Accelerated Corrosion Tests to Service Life Prediction of Materials
STP1193 Use of Waste Materials in Hot-Mix Asphalt
STP1192 Engine Coolant Testing: Third Volume
STP1191 Advances in Multiaxial Fatigue
STP1190 Geosynthetic Soil Reinforcement Testing Procedures
STP1189 Fracture Mechanics: Twenty-Third Symposium
STP1188 Electrochemical Impedance: Analysis and Interpretation
STP1186 Thermomechanical Fatigue Behavior of Materials
STP1185 Compression Response of Composite Structures
STP1184 Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials: Second Volume
STP1183 Pesticide Formulations and Application Systems: 13th Volume
STP1182 Skiing Trauma and Safety: Ninth International Symposium
STP1181 Alternatives to Chlorofluorocarbon Fluids in the Cleaning of Oxygen and Aerospace Systems and Components
STP1180 Masonry: Design and Construction, Problems and Repair
STP1179 Environmental Toxicology and Risk Assessment
STP1178 Composite Materials for Implant Applications in the Human Body: Characterization and Testing
STP1177 Rock for Erosion Control
STP1176 Polymer-Modified Hydraulic-Cement Mixtures
STP1175 Effects of Radiation on Materials: Sixteenth International Symposium
STP1174 High Temperature and Environmental Effects on Polymeric Composites
STP1173 Biomaterials' Mechanical Properties
STP1172 Chevron-Notch Fracture Test Experience: Metals and Non-Metals
STP1171 Constraint Effects in Fracture
STP1170 Radiation Embrittlement of Nuclear Reactor Pressure Vessel Steels: An International Review (Fourth Volume)
STP1169 MD: Mechanics and Mechanisms of Material Damping
STP1168 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing
STP1167 Wear Testing of Advanced Materials
STP1166 Standardizing Terminology for Better Communication: Practice, Applied Theory, and Results
STP1165 Metallography: Past, Present, and Future (75th Anniversary Volume)
STP1164 Vehicle, Tire, Pavement Interface
STP1163 Fire Standards in the International Marketplace
STP1162 Application of Agricultural Analysis in Environmental Studies
STP1161 Leak Detection for Underground Storage Tanks
STP1160 The Impact of U.S. Environmental Regulations on Fuel Quality
STP1159 Standardization of Fretting Fatigue Test Methods and Equipment
STP1158 Superfund Risk Assessment in Soil Contamination Studies
STP1157 Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials
STP1156 Composite Materials: Fatigue and Fracture, Fourth Volume
STP1155 Product Testing with Consumers for Research Guidance: Special Consumer Groups, Second Volume
STP1154 Computer Modeling in Corrosion
STP1153 Fatigue of Electronic Materials
STP1152 Operating Room and Intensive Care Alarms and Information Transfer
STP1151 Nondestructive Testing Standards: Present and Future
STP1150 Fire Hazard and Fire Risk Assessment
STP1149 Small-Crack Test Methods
STP1148 Corrosion of Electronic and Magnetic Materials
STP1147 Effects of Aggregates and Mineral Fillers on Asphalt Mixture Performance
STP1146 Pesticide Formulations and Application Systems: Twelfth Volume
STP1145 Wear and Friction of Elastomers
STP1144 Particulate Debris from Medical Implants: Mechanisms of Formation and Biological Consequences
STP1143 Low Temperature Lubricant Rheology Measurement and Relevance to Engine Operation
STP1142 Hydraulic Conductivity and Waste Contaminant Transport in Soil
STP1141 Laser-Induced Damage in Optical Materials: 1990
STP1140 Computerization and Networking of Materials Databases: Third Volume
STP1139 Acoustic Emission Testing of Aerial Devices and Associated Equipment Used in the Utility Industries
STP1138 Aviation Fuel: Thermal Stability Requirements
STP1137 Corrosion Forms and Control for Infrastructure
STP1136 Materials Characterization by Thermomechanical Analysis
STP1135 Innovations and Uses for Lime
STP1134 New Methods for Corrosion Testing of Aluminum Alloys
STP1133 Performance of Protective Clothing: Fourth Volume
STP1132 Zirconium in the Nuclear Industry: Ninth International Symposium
STP1131 Fracture Mechanics: Twenty-Second Symposium (Volume II)
STP1130 Rapid Load Fracture Testing
STP1129 Slurry Walls: Design, Construction, and Quality Control
STP1128 Damage Detection in Composite Materials
STP1127 Access Security Screening: Challenges and Solutions
STP1126 Geographic Information Systems (GIS) and MappingPractices and Standards
STP1125 Effects of Radiation on Materials: 15th International Symposium
STP1124 Aquatic Toxicology and Risk Assessment: Fourteenth Volume
STP1123 Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes: 2nd Volume
STP1122 Advances in Fatigue Lifetime Predictive Techniques
STP1121 Pavement Management Implementation
STP1120 Composite Materials: Testing and Design (Tenth Volume)
STP1119 Analysis of Paints and Related Materials: Current Techniques for Solving Coatings Problems
STP1118 Current Practices in Ground Water and Vadose Zone Investigations
STP1117 Laser Induced Damage in Optical Materials: 1989
STP1116 Insulation Materials: Testing and Applications, 2nd Volume
STP1115 Plants for Toxicity Assessment: Second Volume
STP1114 Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume)
STP1113 Food Packaging Technology
STP1112 Pesticide Formulations and Application Systems: Eleventh Volume
STP1111 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fifth Volume
STP1110 Composite Materials: Fatigue and Fracture (Third Volume)
STP1109 Modern Instrumental Methods of Elemental Analysis of Petroleum Products and Lubricants
STP1108 Polymer Modified Asphalt Binders
STP1107 Water in Exterior Building Walls: Problems and Solutions
STP1106 Computerization and Networking of Materials Databases: Second Volume
STP1105 Tribological Modeling for Mechanical Designers
STP1104 Skiing Trauma and Safety: Eighth International Symposium
STP1103 Slips, Stumbles, and Falls: Pedestrian Footwear and Surfaces
STP1102 Monitoring Water in the 1990's: Meeting New Challenges
STP1101 Geophysical Applications for Geotechnical Investigations
STP1100 Extending the Life of Bridges
STP1098 Service Life of Rehabilitated Buildings and Other Structures
STP1097 Statistical Sampling: Past, Present and Future Theoretical and Practical
STP1096 Aquatic Toxicology and Risk Assessment: Thirteenth Volume
STP1095 Physico-Chemical Aspects of Soil and Related Materials
STP1094 MiCon 90: Advances in Video Technology for Microstructural Control
STP1093 Buried Plastic Pipe Technology
STP1092 Applications of Automation Technology to Fatigue and Fracture Testing
STP1091 Plants for Toxicity Assessment
STP1090 Continuous Anesthesia Gas Monitoring
STP1089 Deep Foundation Improvements: Design, Construction, and Testing
STP1088 Roofing Research and Standards Development: 2nd Volume
STP1087 Geotechnical Engineering of Ocean Waste Disposal
STP1086 Corrosion in Natural Waters
STP1085 Quantitative Methods in Fractography
STP1084 Building Deck Waterproofing
STP1083 Liquid Particle Size Measurement Techniques: 2nd Volume
STP1082 Characterization and Toxicity of Smoke
STP1081 Geosynthetic Testing for Waste Containment Applications
STP1080 Thermal and Mechanical behavior of Metal Matrix and Ceramic Matrix Composites
STP1079 Asphalt Emulsions
STP1078 Pesticide Formulations and Application Systems: 10th Volume
STP1077 Acoustic Emission: Current Practice and Future Directions
STP1076 Geosynthetics: Microstructure and Performance
STP1075 Waste Testing and Quality Assurance: Third Volume
STP1074 Fracture Mechanics: Twenty-First Symposium
STP1073 Natural and Artificial Playing Fields: Characteristics and Safety Features
STP1072 Charpy Impact Test: Factors and Variables
STP1071 Biological Contaminants in Indoor Environments
STP1070 Geotechnics of Waste FillsTheory and Practice
STP1069 Buildings Sealants: Materials, Properties, and Performance
STP1068 High-Temperature, High-Shear Oil Viscosity: Measurement and Relationship to Engine Operation
STP1067 Air Change Rate and Airtightness in Buildings
STP1066 Laser Techniques in Luminescence Spectroscopy
STP1065 Corrosion Rates of Steel in Concrete
STP1064 Carbonate Additions to Cement
STP1063 Masonry: Components to Assemblages
STP1062 Waste Testing and Quality Assurance: Second Volume
STP1061 Petrography Applied to Concrete and Concrete Aggregates
STP1060 Surface-Crack Growth: Models, Experiments, and Structures
STP1059 Composite Materials: Testing and Design (Ninth Volume)
STP1058 Fatigue and Fracture Testing of Weldments
STP1057 Accreditation Practices for Inspections, Tests, and Laboratories
STP1056 The Measurement and Correction of Electrolyte Resistance in Electrochemical Tests
STP1055 Vertebrate Pest Control and Management Materials: Sixth Volume
STP1054 Science and Technology of Glazing Systems
STP1053 Ground Water and Vadose Zone Monitoring
STP1052 Monitoring Methods for Toxics in the Atmosphere
STP1051 Bioprocessing Safety: Worker and Community Safety and Health Considerations
STP1050 Safety in Ice Hockey
STP1049 Environmentally Assisted Cracking: Science and Engineering
STP1048 Future Fuels for General Aviation
STP1047 Reduced Activation Materials for Fusion Reactors
STP1046 Effects of Radiation on Materials: 14th International Symposium (Volume I)
STP1045 Dynamic Elastic Modulus Measurements in Materials
STP1044 Advances in Thermoplastic Matrix Composite Materials
STP1043 Hazardous and Industrial Solid Waste Minimization Practices
STP1042 Residual and Unspecified Elements in Steel
STP1041 Asphalt Concrete Mix Design: Development of More Rational Approaches
STP1040 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume
STP1039 Water Vapor Transmission Through Building Materials and Systems: Mechanisms and Measurement
STP1038 Laser Induced Damage in Optical Materials: 1987
STP1037 Chemical Protective Clothing Performance in Chemical Emergency Response
STP1036 Pesticide Formulations and Application Systems: International Aspects 9th Volume
STP1035 Product Testing with Consumers for Research Guidance
STP1034 Exterior Wall Systems: Glass and Concrete Technology, Design, and Construction
STP1033 Environmental Aspects of Stabilization and Solidification of Hazardous and Radioactive Wastes
STP1032 Metal Matrix Composites: Testing, Analysis, and Failure Modes
STP1031 Surface Characteristics of Roadways: International Research and Technologies
STP1030 Insulation Materials, Testing and Applications
STP1029 Performance of Buildings and Serviceability of Facilities
STP1028 Laser Induced Damage in Optical Materials: 1986
STP1027 Aquatic Toxicology and Hazard Assessment: 12th Volume
STP1026 Nondestructive Testing of Pavements and Backcalculation of Moduli
STP1025 Factors That Affect the Precision of Mechanical Tests
STP1024 Susceptibility to Inhaled Pollutants
STP1023 Zirconium in the Nuclear Industry: Eighth International Symposium
STP1022 Skiing Trauma and Safety: Seventh International Symposium
STP1021 Turbine Oil Monitoring
STP1020 Fracture Mechanics: Perspectives and Directions (Twentieth Symposium)
STP1019 Novel Techniques in Fossil Fuel Mass Spectrometry
STP1018 Oil Dispersants: New Ecological Approaches
STP1017 Computerization and Networking of Materials Data Bases
STP1016 Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements
STP1015 Laser Induced Damage in Optical Materials: 1985
STP1014 Vane Shear Strength Testing in Soils: Field and Laboratory Studies
STP1013 Effects of Soil Characteristics on Corrosion
STP1012 Composite Materials: Fatigue and Fracture, Second Volume
STP1011 Radiation Embrittlement of Nuclear Reactor Pressure Vessel Steels: An International Review (Third Volume)
STP1010 Selection and Use of Wear Tests for Ceramics
STP1009 Progress in Analytical Luminescence
STP1008 Intramedullary Rods: Clinical Performance and Related Laboratory Testing
STP1007 Aquatic Toxicology and Environmental Fate: Eleventh Volume
STP1006 Development of Fatigue Loading Spectra
STP1005 Distillate Fuel: Contamination, Storage, and Handling
STP1004 Analytical and Experimental Methods for Residual Stress Effects in Fatigue
STP1003 Test Methods and Design Allowables for Fibrous Composites: 2nd Volume
STP1002 Design and Protocol for Monitoring Indoor Air Quality
STP1001 Reactor Dosimetry: Methods, Applications, and Standardization
STP1000 Corrosion Testing and Evaluation: Silver Anniversary Volume
STP999 Waste Testing and Quality Assurance
STP998 Electrical Insulating Oils
STP997 Compositional Analysis by Thermogravimetry
STP996 New Stone Technology, Design, and Construction for Exterior Wall Systems
STP995V1 Nonlinear Fracture Mechanics: Volume I Time-Dependent Fracture
STP995V2 Nonlinear Fracture Mechanics: Volume II Elastic-Plastic Fracture
STP994 Current Trends in Protective Packaging of Computers and Electronic Components
STP993 Mechanical Relaxation of Residual Stresses
STP992 Masonry: Materials, Design, Construction, and Maintenance
STP991 Standardization of Technical Terminology: Principles and Practices (Second Volume)
STP990 Semiconductor Fabrication: Technology and Metrology
STP989 Performance of Protective Clothing: Second Symposium
STP988 Functional Testing of Aquatic Biota for Estimating Hazards of Chemicals
STP987 Effect of Steel Manufacturing Processes on the Quality of Bearing Steels
STP986 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Third Volume
STP985 Rapid Methods for Chemical Analysis of Hydraulic Cement
STP983 Mathematical Modeling of Fires
STP982 Mechanics of Fatigue Crack Closure
STP981 Adhesively Bonded Joints: Testing, Analysis, and Design
STP980 Pesticide Formulations and Application Systems: Eighth Volume
STP979 MiCon 86: Optimization of Processing, Properties, and Service Performance Through Microstructural Control
STP978 Galvanic Corrosion
STP977 Advanced Triaxial Testing of Soil and Rock
STP976 Chemical and Biological Characterization of Municipal Sludges, Sediments, Dredge Spoils, and Drilling Muds
STP975 Fluid Filtration: Gas Volume I
STP974 Vertebrate Pest Control and Management Materials: 5th Volume
STP973 Computerization and Data Management in the Metals Analysis Laboratory
STP972 Composite Materials: Testing and Design (Eighth Conference)
STP971 Aquatic Toxicology and Hazard Assessment: 10th Volume
STP970 The Use of Synthetic Environments for Corrosion Testing
STP969 Fracture Mechanics: Nineteenth Symposium
STP968 Pesticide Formulations and Application Systems: Seventh Volume
STP967 Geotechnical Applications of Remote Sensing and Remote Data Transmission
STP966 Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy
STP965 Degradation of Metals in the Atmosphere
STP964 Testing Technology of Metal Matrix Composites
STP963 Ground-Water Contamination: Field Methods
STP962 Hydrogen Embrittlement: Prevention and Control
STP961 Uniformity of Cement Strength
STP960 Emerging Semiconductor Technology
STP959 Roofing Research and Standards Development
STP958 Industrial Dust Explosions
STP957 Sampling and Calibration for Atmospheric Measurements
STP956 Influence of Radiation on Material Properties: 13th International Symposium (Part II)
STP955 Radiation-Induced Changes in Microstructure: 13th International Symposium (Part I)
STP954 Laser Induced Damage in Optical Materials: 1984
STP953 Quantitative Characterization and Performance of Porous Implants for Hard Tissue Applications
STP952 Geotextile Testing and the Design Engineer
STP951 Plasma Spectroscopy for the Analysis of Hazardous Materials: Design and Application of Enclosed Plasma Sources
STP950 The Pressuremeter and its Marine Applications: Second International Symposium
STP949 The Design, Sample Handling, and Applications of Infrared Microscopes
STP948 Fractography of Modern Engineering Materials: Composites and Metals
STP947 Testing of Metallic and Inorganic Coatings
STP946 Slurry Erosion: Uses, Applications, and Test Methods
STP945 Fracture Mechanics: Eighteenth Symposium
STP944 Chemical Analysis of Metals
STP943 Pesticide Formulations and Application Systems: Sixth Volume
STP942 Low Cycle Fatigue
STP941 Asphalt Rheology: Relationship to Mixture
STP940 New Approaches to Monitoring Aquatic Ecosystems
STP939 Zirconium in the Nuclear Industry
STP938 Skiing Trauma and Safety: Sixth International Symposium
STP937 Toughened Composites
STP936 Instrumented Impact Testing of Plastics and Composite Materials
STP935 Cleaning Stone and Masonry
STP934 Computerized Quantitative Infrared Analysis
STP933 Hazardous and Industrial Solid Waste Testing and Disposal: Sixth Volume
STP932 Hazard Communication: Issues and Implementation
STP931 Lime for Environmental Uses
STP930 Alkalies In Concrete
STP929 The Tire Pavement Interface
STP928 Impact of Acid Rain and Deposition on Aquatic Biological Systems
STP927 Fatigue in Mechanically Fastened Composite and Metallic Joints
STP926 Engineering Dielectrics Volume IIB Electrical Properties of Solid Insulating Materials: Measurement Techniques
STP925 Quality Control in Remedial Site Investigation: Hazardous and Industrial Solid Waste Testing: Fifth Volume
STP924 Basic Questions in Fatigue: Volume I
STP923 Marine Geotechnology and Nearshore/Offshore Structures
STP922 Thermal Insulation: Materials and Systems
STP921 Aquatic Toxicology and Environmental Fate: Ninth Volume
STP920 Community Toxicity Testing
STP919 Drop-Weight Test for Determination of Nil-Ductility Transition Temperature: User's Experience with ASTM Method E 208
STP918 Case Histories Involving Fatigue and Fracture Mechanics
STP917 Industrial Applications of Titanium and Zirconium: Fourth Volume
STP916 Aspects of Lubricant Oxidation
STP915 Pesticide Formulations and Application Systems: Fifth Volume
STP914 Review and Evaluation of Appearance: Methods and Techniques
STP913 Physical Requirement Guidelines for Sensory Evaluation Lab