Digital Library / Topics / Iron and Steel Products / Ferrous Castings; Ferroalloys / All JAI
Case Depth and Static Capacity of Surface Induction-Hardened Rings
Improving Control of a Quenching Process by Coupling Analysis Methods
A New Method to Study the Effect of Cooling Rate on the Decomposition of Austenite in Advanced High Strength Sheet Steels
Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties
Finite Element Method Numerical Simulation of the Carburizing Process
Generalized Equation for Cooling Time Evaluation and Its Verification by CFD Analysis
Enhanced Hardenability through Application of Magnetic Fields
Considering the Body-Centered Cubic Lattice Parameter of α-Fe Alloys versus Concentrations of Solved Elements
Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching
Analysis of Stress Concentration around Inclusions due to Thermally Induced Strain to the Steel Matrix
Modeling of Quenching and Tempering Induced Phase Transformations in Steels
Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching
Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces
Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process
Role of Thiosulfate on Chloride Breakdown Potential of Heat Treated Ni-18Cr-6Fe Alloys
Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching
Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils
A Complete System for Testing and Evaluation of Quenchants and Quenching Systems
A Review on Modeling and Simulation of Quenching
Technology and Applications of Alternately Timed Quenching Technology
Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching
An Overview of Technology and Equipment for Hardening of Large Steel Parts
Spray Quenching in Induction Hardening Applications
Quenchant Characterization by Cooling Curve Analysis
Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels
Heat Transfer During Quenching and Assessment of Quench Severity—A Review
An Investigation on Quenching Performance of Hot Alkaline Bath
One More Discussion “What is Intensive Quenching Process?”
Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA
A Novel Approach to Model Moving Heat Sources
Accurate Determination of Surface Heat Fluxes During Quenching Characterized by Boiling Water Heat Transfer
The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders
Analysis of the Segerberg Hardening Power Equation
Application of thermodynamics and kinetics in the designing of new type TRIP steels concerning Al and P effects
Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil
Explanation of the Origin of Distortion and Residual Stress in Carburized Ring Using Computer Simulation
Computer Simulation of Quenched Steel Working Stress
Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays
Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams
An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods
In-situ
Fatigue Damage Investigations in Welded Metallic Components by Infrared Techniques
Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure
A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating
Comparison of Thermal Expansion Behavior of Phosphoric Irons with Conventional Concrete Reinforcement Steel
Accelerated Cooling of Steel Plates: The Time Has Come
Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique
Cooling Characteristic Test of Quenching Media
Gas-Jet Quenching
Corrosion of Phosphoric Irons in Acidic Environments
Electrochemical Techniques in Corrosion: Status, Limitations, and Needs
Effect of Active Elements on the Oxidation Behavior of a FeCrAl Alloy Produced by Co-Rolling and Annealing
Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces
Study of Corrosion Initiation of a Steel Panel from a Defect in Coating Using Localized Electrochemical Impedance Spectroscopy (LEIS)
Cyclic Oxidation Behavior of Co-rolled Al-Ferritic Stainless Steel
Observation of Austenitic Grain Growth in Some Alloy Structural Steels
Influence of Metallurgical Parameters on the Coercive Strength of Some Carbon Steels
Are Multiaxial Fatigue Criteria Appropriate When Steels with Surface Defects are Subjected to Rolling Contact Fatigue
Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications
A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products
Experiences in Using Ultrasonic Testing of Bearing Steel for Demanding Applications
Rapid Evaluation of Inclusions in Bearing Steel
Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components
Developing ASTM E 2283: Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
Measuring the Field Corrosion Activity of Bridge Decks Built with Bare and Epoxy Coated Steel
Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel
X-ray Microdiffraction for the Analysis of Bearing Operation Conditions
Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel
Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts
New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication
Evaluation of Methodologies Used for Establishing Soil-Water Characteristic Curve
Evaluation Procedures of Nonmetallic Inclusions in Steel for Highly Reliable Bearings
Study on Flaking Process in Bearings by White Etching Area Generation
Micro-Plastic Material Model and Residual Fields in Rolling Contacts
Development of a Supermartensitic Stainless Steel Microalloyed with Niobium
A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels
Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications
Plasma Assisted Heat Treating Processes of Bearing Components
Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry
The Challenge of Multiple Particles in Extreme Value Inclusion Rating
A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents
Continued Developments in Easily Carburizable High Speed Steel Alloys
Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
Radioactivity Inspections Applied to the Steelmaking Industry
The Mechanical Characterization of Low Work Hardening, High Strength Steel
Corrosion Behavior of Heat-Treated Duplex Stainless Steels in Saturated Carbon Dioxide-Chloride Solutions
Steel Superstrengthening Phenomenon
Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel
The Technical Foundations of a Unified Adjusted Reference Temperature for RPV Fracture Toughness