Digital Library / Topics / Construction / Road and Paving Materials; Vehicle-Pavement Systems / All JTE

• A Comparison of Warm Asphalt Binder Aging with Laboratory Aging Procedures
• Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device
• Energy-Based Approach for Determining Flow Number
• Evaluation of Engineering Properties of Rubberized Laboratory Mixes Containing Warm Mix Additives
• Evaluating Parameters for Characterization of Cracking in Asphalt Concrete
• Comparison of Linear Visco-Elastic Complex Modulus and Yield Shear Stress in DSR Moisture Damage Test
• Effects of Various Long-Term Aging Procedures on the Rheological Properties of Laboratory Prepared Rubberized Asphalt Binders
• Studying of the Dynamic Behavior of Water in a Vibrating Tank
• Connected Air Voids Content in Permeable Friction Course Mixtures
• Method of Compaction has Significant Effects on Stress-Strain Behavior of Hydraulic Asphalt Concrete
• Effects of Binders on Resilient Modulus of Rubberized Mixtures Containing RAP Using Artificial Neural Network Approach
• Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures
• Determination of Volumetric Properties for Permeable Friction Course Mixtures
• Effects of Densification on Permeable Friction Course Mixtures
• Influence of Selected Mix Design Factors on the Thermal Behavior of Lightweight Aggregate Asphalt Mixes
• Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test
• Forensic Investigation of Mechanically Stabilized Earth (MSE) Approaches
• Determination of Price Reduction Factors for Density-Deficient Asphalt Pavements
• A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure
• Interpretation of Complex Modulus Test Results for Asphalt-Aggregate Mixes
• Measurement and Evaluation of Asphalt Concrete Thermal Expansion and Contraction
• Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures
• Characterization of Louisiana Asphalt Mixtures Using Simple Performance Tests
• Evaluation of Friction Performance of Coarse Aggregates and Hot-Mix Asphalt Pavements
• Experimental Study for Evaluating Crack Retardation of Asphalt Concrete Overlays
• Evaluate the Simple Surface Energy of Aggregates Using the Capillary Rise Method
• Evaluation of Nonnuclear Density Tests on Hot Mix Asphalt Segregation
• Using Rolling Dynamic Deflectometer and Overlay Tester to Determine the Reflective Cracking Potential
• Relationship of Aggregate Microtexture to Asphalt Pavement Skid Resistance
• Development of a Viscosity Specification for Hot-Poured Bituminous Sealants
• Characterization of Thermal Degradation ofqa Liquid Amine Anti-Strip Additives in Asphaltqa Binders Due to RTFO and PAV-Aging
• Development of Double Edge Notched Tension (DENT) Test for Asphalt Binders
• Methodology of Assessing Testing Variation for Volumetric Quantities in Hot Mix Asphalt Production
• Laboratory-based Unified Permanent Deformation Model for Hot-Mix Asphalt Mixtures
• Dynamic Modulus of Asphalt Mixtures for Development of Korean Pavement Design Guide
• Quantification of Coarse Aggregate Surface Texture Using Image Analysis
• Deicer Salt Scaling Resistance of Concrete Containing Manufactured Sands
• Effect of Quarry Production Process on Specific Gravities of Aggregates
• Effect of Antistrip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential
• Characterizing the Asphalt-Aggregate Mixtures Using Rheological Properties of Asphalt Binders
• Device Harmonization to Determine Smoothness Specification for Asphalt Pavements
• A Procedure to Quantify Organic Antistrip Additives in Asphalt Binders and Mixes
• Effect of Bitumen Acid Number on Moisture Susceptibility of Asphalt Mixtures
• Application of 3D Laser Scanning on Measuring Pavement Roughness
• A Study on Properties of Foamed-Asphalt-Treated Mixes
• Utilization of Steel Slag Aggregate for Road Bases
• Effects of Air Void Size Distribution, Pore Pressure, and Bond Energy on Moisture Damage
• Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements
• Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
• Evaluation of Stripping in Bituminous Mixtures Using Conventional and Image Processing Techniques
• Estimation of Surface Macrotexture in Hot Mix Asphalt Concrete Pavements Using Laser Texture Data
• Analysis of Variability in Pay Factor Systems and Sampling Methods
• Quantification of Potentially Odorous Volatile Organic Compounds from Asphalt Binders Using Head-Space Gas Chromatography
• Determination of Thermal Properties of Asphalt Mixtures
• Influence of Pavement Surface Type on Tire/Pavement Generated Noise
• Piezoelectric Sensors for Weigh-In-Motion Systems: An Experimental Insight into Edge Effects
• Influence of Hysteretic Heating on Asphalt Fatigue Characterization
• Comparative Statistical Analysis of Original and Aged Bituminous Material Viscosity
• Mechanistic-Empirical Characterization of Bonding Between Ultra-Thin White-Topping and Asphalt Pavement
• An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties
• Evaluation Indicator of Asphalt Mixture Rutting Susceptibility
• Design and Performance of the HEART Wheel Load Simulator
• Testing of Bridge Weigh-In-Motion System in a Sub-Arctic Climate
• Investigation of Effects of Testing Methods on Characterization of Asphalt Concrete
• Influence of the Geometry of the Extrusion Die on the Melt Strength of Polymers
• Development of a Procedure to Determine the Effectiveness of Asphalt-Removing Solvents
• Optimal Quality Characteristic Evaluation for Asphalt Mixing Plants
• Measurement of Aggregate Texture and its Influence on Hot Mix Asphalt (HMA) Permanent Deformation
• Spatial and Directional Distribution of Aggregates in Asphalt Mixes
• Enhancement of Asphalt Pavement Evaluation Using Monte Carlo Simulation and Accelerated Pavement Testing
• Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures
• Fatigue Testing and Evaluation of Asphalt Binders Using the Dynamic Shear Rheometer
• Influence of Hot-Mix Asphalt Parameters on the Correction Factors of the Ignition Oven Test
• Correlating Permanent Deformation Characteristics of Hot Mix Asphalt with Aggregate Geometric Irregularities
• Model-Fitting the Master Curves of the Dynamic Shear Rheometer Data to Extract a Rut-controlling Term for Asphalt Pavements
• Quantification of Coarse Aggregate Shape and Its Effect on Engineering Properties of Hot-Mix Asphalt Mixtures
• Coarse Aggregate Shape and Size Properties Using a New Image Analyzer
• Superpave Shear Tester as a Simple Standardized Measure to Evaluate Aggregate-Asphalt Mixture Performance
• Evaluation of Density Gradients in Loaded Wheel Tester Samples
• Falling-Weight Deflectometer Sensor Location in the Backcalculation of Concrete Pavement Moduli
• Network-Level Pavement Deflection Testing and Structural Evaluation
• Laboratory Measurements and Analysis of Clogging Mechanism of Porous Asphalt Mixes
• Identifying Segregation in Hot Mix Asphalt Pavements Using Rolling Nuclear Gage Measurements and Infrared Imaging
• Precision of ASTM D 5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
• Comparison and Evaluation of Tests for Coarse Aggregate Particle Shape, Angularity, and Surface Texture
• Effect of Asphalt Mix Design Method on Binder and Gradation Selection
• Adapting Superpave Technology to Design of Hot Recycled Mixes
• Relating Triaxial Test Properties of Asphalt Mixtures to Mix Parameters Determined by Marshall Stability Test
• Development of a Road Roughness Profile Delineation Procedure
• First Continuous Remote Bridge Monitoring System Ensures Safe Operation of 65-Year-Old Rolling Bascule Bridge
• Determination of Thermal Properties of Pavement Materials and Unbound Aggregates by Transient Heat Conduction
• Cyclic Tests on High-Strength Prestressed Concrete Frames
• Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens
• An Analysis of Hot Mix Asphalt Mat Density Measurements
• Comparison of Asphalt Contents Measured with the Nuclear Gage and Extraction Methods
• Solvent-Free, Nuclear-Free Determination of Asphalt Content and Gradation of Hot-Mix Asphalt Concrete
• An Evaluation of Several Techniques for Measuring Air-void Content in Asphalt Concrete Specimens
• Analysis of Marshall Test Behavior with Triaxial Test Determined Material Properties
• The Effect of Moisture on Laboratory-Prepared Asphalt Mixtures
• Comparison of Methods for Measuring Moisture Content of Aggregate and Asphalt-Aggregate Paving Mixtures
• Nondestructive Testing: Interpretation of Deflection Bowl for Falling Weight Deflectometer Tests on Flexible Pavements
• Additives for Bitumen in Road Construction
• Dynamic Properties of Asphalt Concrete
• A Suggested Methodology for the Analysis of Asphalt Age-Hardening
• A Rapid Test for Asphalt Content of Bituminous Mixtures
• A Comprehensive Viscoelasto-Plastic Characterization of Sand-Asphalt Compressive and Tensile Cyclic Loading
• Rheology of Cold-Recycled Pavement Materials Using Creep Test
• Analysis of Nonlinear Behavior of Asphalt Concrete During Marshall Test
• Experimental Analysis and Numerical Simulation of Marshall Method of Asphalt Concrete Mix Design
• Laboratory Testing of Asphalt Concrete for Porous Pavements
• Quality Control of Tests Conducted on Bituminous Mixtures in Quebec
• Void Content Prediction in Two-Size Aggregate Mixes
• A Review of Aggregate Selection Criteria for Improved Wear Resistance and Skid Resistance of Bituminous Surfaces
• A Modified Procedure for Measuring the Maximum Specific Gravity of Bituminous Paving Mixtures
• The Polishing Characteristics of Common Rock Types Used as Aggregate in Bituminous Pavement Surfaces
• A Method for the Determination of the Surface Area of Fine Aggregate in Bituminous Mixtures
• Behavior of Aggregate in the Washington Degradation Test
• Concept and Test Method for a Unified Characterization of the Geometric Irregularity of Aggregate Particles
• Red Mud from Alumina Plants as a Possible Source of Synthetic Aggregate
• Asphalt Cements: Pen-Vis Number and Its Application to Moduli of Stiffness
• Nonlinear Viscoelastic Properties of Bituminous Concretes
• Glass Transition of Asphalts Under Pressure
• A Study of Currently Used Methods for Determining the Permeability of Bituminous Mixtures
• A Microscopic Approach to the Microstructure of Paving Asphalts