|
Standards
B1-01(2007) - Standard Specification for Hard-Drawn Copper Wire
B2-08 - Standard Specification for Medium-Hard-Drawn Copper Wire B3-01(2007) - Standard Specification for Soft or Annealed Copper Wire B5-00(2005) - Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes B6-09 - Standard Specification for Zinc B8-04 - Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft B9-90(2008) - Standard Specification for Bronze Trolley Wire B16/B16M-05 - Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines B19-05 - Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks B21/B21M-06 - Standard Specification for Naval Brass Rod, Bar, and Shapes B22-09 - Standard Specification for Bronze Castings for Bridges and Turntables B23-00(2005) - Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal") B26/B26M-09 - Standard Specification for Aluminum-Alloy Sand Castings B29-03(2009) - Standard Specification for Refined Lead B30-09 - Standard Specification for Copper Alloys in Ingot Form B32-08 - Standard Specification for Solder Metal B33-04 - Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes B36/B36M-08a - Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar B37-08 - Standard Specification for Aluminum for Use in Iron and Steel Manufacture B39-79(2008) - Standard Specification for Nickel B42-02e1 - Standard Specification for Seamless Copper Pipe, Standard Sizes B43-09 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes B47-95a(2007) - Standard Specification for Copper Trolley Wire B48-00(2005)e1 - Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors B49-08a - Standard Specification for Copper Rod Drawing Stock for Electrical Purposes B61-08 - Standard Specification for Steam or Valve Bronze Castings B62-09 - Standard Specification for Composition Bronze or Ounce Metal Castings B63-07 - Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials B66/B66M-06e1 - Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts B67-05 - Standard Specification for Car and Tender Journal Bearings, Lined B68-02 - Standard Specification for Seamless Copper Tube, Bright Annealed B68M-99(2005) - Standard Specification for Seamless Copper Tube, Bright Annealed [Metric] B69-08 - Standard Specification for Rolled Zinc B70-90(2007) - Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating B75-02 - Standard Specification for Seamless Copper Tube B75M-99(2005) - Standard Specification for Seamless Copper Tube [Metric] B76-90(2007) - Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating B77-07 - Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys B78-90(2007) - Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating B80-07 - Standard Specification for Magnesium-Alloy Sand Castings B84-07 - Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors B85/B85M-09 - Standard Specification for Aluminum-Alloy Die Castings B86-09a - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings B88-03 - Standard Specification for Seamless Copper Water Tube B88M-05 - Standard Specification for Seamless Copper Water Tube [Metric] B90/B90M-07 - Standard Specification for Magnesium-Alloy Sheet and Plate B91-07 - Standard Specification for Magnesium-Alloy Forgings B92/B92M-07 - Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting B93/B93M-07 - Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings B94-07 - Standard Specification for Magnesium-Alloy Die Castings B96/B96M-06 - Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels B98/B98M-08 - Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes B99/B99M-06 - Standard Specification for Copper-Silicon Alloy Wire for General Applications B100-08 - Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use B101-07 - Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction B102-00(2005) - Standard Specification for Lead- and Tin-Alloy Die Castings B103/B103M-09 - Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar B105-05 - Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors B106-08 - Standard Test Methods for Flexivity of Thermostat Metals B107/B107M-07 - Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire B108/B108M-08 - Standard Specification for Aluminum-Alloy Permanent Mold Castings B111/B111M-09 - Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock B114-07 - Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors B115-00(2004) - Standard Specification for Electrolytic Copper Cathode B116-95(2007) - Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage B121/B121M-01(2006) - Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar B122/B122M-08 - Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar B124/B124M-09 - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes B127-05(2009) - Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip B129-07 - Standard Specification for Cartridge Brass Cartridge Case Cups B130-08 - Standard Specification for Commercial Bronze Strip for Bullet Jackets B131-07 - Standard Specification for Copper Alloy Bullet Jacket Cups B134/B134M-08 - Standard Specification for Brass Wire B135-08a - Standard Specification for Seamless Brass Tube B135M-08a - Standard Specification for Seamless Brass Tube [Metric] B136-84(2008)e1 - Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum B137-95(2009) - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum B138/B138M-06 - Standard Specification for Manganese Bronze Rod, Bar, and Shapes B139/B139M-07 - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes B140/B140M-07 - Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes B148-97(2009) - Standard Specification for Aluminum-Bronze Sand Castings B150/B150M-08 - Standard Specification for Aluminum Bronze Rod, Bar, and Shapes B151/B151M-05 - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar B152/B152M-09 - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar B153-05 - Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing B154-05 - Standard Test Method for Mercurous Nitrate Test for Copper Alloys B159/B159M-05 - Standard Specification for Phosphor Bronze Wire B160-05(2009) - Standard Specification for Nickel Rod and Bar B161-05(2009) - Standard Specification for Nickel Seamless Pipe and Tube B162-99(2009) - Standard Specification for Nickel Plate, Sheet, and Strip B163-08 - Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes B164-03(2008) - Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire B165-05(2009) - Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube B166-08 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire B167-08 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube B168-08 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip B169/B169M-05 - Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar B170-99(2004) - Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes B171/B171M-09a - Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers B172-01a(2007)e1 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors B173-01a(2007)e1 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors B174-02(2007)e1 - Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors B176-08 - Standard Specification for Copper-Alloy Die Castings B177-01(2006)e1 - Standard Guide for Engineering Chromium Electroplating B179-06 - Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes B183-79(2004)e1 - Standard Practice for Preparation of Low-Carbon Steel for Electroplating B187/B187M-06 - Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes B188-09 - Standard Specification for Seamless Copper Bus Pipe and Tube B189-05 - Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes B193-02(2008) - Standard Test Method for Resistivity of Electrical Conductor Materials B194-08 - Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar B196/B196M-07 - Standard Specification for Copper-Beryllium Alloy Rod and Bar B197/B197M-07 - Standard Specification for Copper-Beryllium Alloy Wire B199-07 - Standard Specification for Magnesium-Alloy Permanent Mold Castings B200-85(2004) - Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys B201-80(2004) - Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces B206/B206M-07 - Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire B208-06 - Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings B209-07 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate B209M-07 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric] B210-04 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes B210M-05 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric] B211-03 - Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire B211M-03 - Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] B212-99(2006) - Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel B213-03 - Standard Test Method for Flow Rate of Metal Powders B214-07 - Standard Test Method for Sieve Analysis of Metal Powders B215-08 - Standard Practices for Sampling Metal Powders B216-97(2003) - Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes B221M-07 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric] B221-08 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes B223-08 - Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) B224-04 - Standard Classification of Coppers B226-04 - Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors B227-04 - Standard Specification for Hard-Drawn Copper-Clad Steel Wire B228-04 - Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors B229-04 - Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors B230/B230M-07 - Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes B231/B231M-04 - Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors B232/B232M-09 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR) B233-97(2007) - Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes B234-04 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers B234M-04 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric] B236M-07 - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] B236-07 - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) B237-01(2006) - Standard Specification for Refined Antimony B240-09 - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings B241/B241M-02 - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube B242-99(2004)e1 - Standard Guide for Preparation of High-Carbon Steel for Electroplating B243-09 - Standard Terminology of Powder Metallurgy B244-09 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments B246-05 - Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes B247-09 - Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings B247M-09 - Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric] B248-07 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar B248M-07 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric] B249/B249M-09 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings B250/B250M-07 - Standard Specification for General Requirements for Wrought Copper Alloy Wire B251M-97(2003) - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric] B251-02e1 - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube B252-92(2004) - Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings B253-87(2005)e1 - Standard Guide for Preparation of Aluminum Alloys for Electroplating B254-92(2004)e1 - Standard Practice for Preparation of and Electroplating on Stainless Steel B258-02(2008) - Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors B263-04 - Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors B265-09ae1 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate B267-07 - Standard Specification for Wire for Use In Wire-Wound Resistors B271-08 - Standard Specification for Copper-Base Alloy Centrifugal Castings B272-07 - Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip) B275-05 - Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought B276-05e1 - Standard Test Method for Apparent Porosity in Cemented Carbides B277-95(2006) - Standard Test Method for Hardness of Electrical Contact Materials B279-04 - Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication B280-08 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service B281-88(2008) - Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings B283-09a - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) B286-07 - Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment B294-92(2006)e1 - Standard Test Method for Hardness Testing of Cemented Carbides B296-03(2008) - Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought B298-07 - Standard Specification for Silver-Coated Soft or Annealed Copper Wire B299-08 - Standard Specification for Titanium Sponge B301/B301M-08 - Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes B302-07 - Standard Specification for Threadless Copper Pipe, Standard Sizes B306-09 - Standard Specification for Copper Drainage Tube (DWV) B308/B308M-02 - Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles B311-08 - Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity B312-09 - Standard Test Method for Green Strength of Specimens Compacted from Metal Powders B313/B313M-02e1 - Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes B315-06 - Standard Specification for Seamless Copper Alloy Pipe and Tube B316/B316M-02 - Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods B317/B317M-07 - Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) B319-91(2004) - Standard Guide for Preparation of Lead and Lead Alloys for Electroplating B320-60(2008) - Standard Practice for Preparation of Iron Castings for Electroplating B322-99(2004) - Standard Guide for Cleaning Metals Prior to Electroplating B324-01(2007) - Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes B327-09a - Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys B329-06 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter B330-07 - Standard Test Method for Fisher Number of Metal Powders and Related Compounds B331-95(2002) - Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction B333-03(2008) - Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip B335-03(2008) - Standard Specification for Nickel-Molybdenum Alloy Rod B338-09 - Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers B339-00(2005) - Standard Specification for Pig Tin B343-92a(2004)e1 - Standard Practice for Preparation of Nickel for Electroplating with Nickel B344-01 - Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements B345/B345M-02 - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems B348-09 - Standard Specification for Titanium and Titanium Alloy Bars and Billets B349/B349M-09 - Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application B350/B350M-02(2006) - Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application B351/B351M-08e1 - Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application B352/B352M-02(2006) - Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application B353-07 - Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding) B354-05 - Standard Terminology Relating to Uninsulated Metallic Electrical Conductors B355-06 - Standard Specification for Nickel-Coated Soft or Annealed Copper Wire B359/B359M-02(2006) - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins B360-09 - Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications B361-08 - Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings B362-91(2008) - Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal B363-06a - Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings B364-96(2009) - Standard Specification for Tantalum and Tantalum Alloy Ingots B365-98(2004) - Standard Specification for Tantalum and Tantalum Alloy Rod and Wire B366-04be1 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings B367-09 - Standard Specification for Titanium and Titanium Alloy Castings B368-09 - Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) B369-09 - Standard Specification for Copper-Nickel Alloy Castings B370-09 - Standard Specification for Copper Sheet and Strip for Building Construction B371/B371M-08 - Standard Specification for Copper-Zinc-Silicon Alloy Rod B372-97(2003) - Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube B373-00(2006) - Standard Specification for Aluminum Foil for Capacitors B374-06 - Standard Terminology Relating to Electroplating B379-04 - Standard Specification for Phosphorized Coppers—Refinery Shapes B380-97(2008)e1 - Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure B381-09 - Standard Specification for Titanium and Titanium Alloy Forgings B386-03 - Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil B387-90(2001) - Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire B388-06 - Standard Specification for Thermostat Metal Sheet and Strip B389-81(2008) - Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal B390-92(2006) - Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides B391-03 - Standard Specification for Niobium and Niobium Alloy Ingots B392-03 - Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire B393-05 - Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate B394-03 - Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes B395/B395M-08 - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes B398/B398M-02(2007) - Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes B399/B399M-04 - Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors B400-08 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors B401-04 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) B403-07 - Standard Specification for Magnesium-Alloy Investment Castings B406-96(2005) - Standard Test Method for Transverse Rupture Strength of Cemented Carbides B407-08a - Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube B408-06 - Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar B409-06e1 - Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip B411/B411M-08 - Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar B413-97a(2008) - Standard Specification for Refined Silver B415-98(2007) - Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire B416-98(2007) - Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors B417-00(2006)e1 - Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel B418-09 - Standard Specification for Cast and Wrought Galvanic Zinc Anodes B422-08a - Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip B423-05(2009) - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube B424-05(2009) - Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip B425-99(2009) - Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar B427-02 - Standard Specification for Gear Bronze Alloy Castings B428-09 - Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube B429/B429M-06 - Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube B430-97(2006)e1 - Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry B432-09a - Standard Specification for Copper and Copper Alloy Clad Steel Plate B434-06 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip B435-06 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip B438-08 - Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) B439-08 - Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) B440-00(2005) - Standard Specification for Cadmium B441-04 - Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) B443-00(2009) - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip B444-06 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube B446-03(2008) - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar B447-07 - Standard Specification for Welded Copper Tube B449-93(2004) - Standard Specification for Chromates on Aluminum B452-09 - Standard Specification for Copper-Clad Steel Wire for Electronic Application B453/B453M-08 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes B455-05 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes B456-03 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium B457-67(2008)e1 - Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum B462-06 - Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive B463-04(2009) - Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip B464-05(2009) - Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe B465-09 - Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar B466/B466M-09 - Standard Specification for Seamless Copper-Nickel Pipe and Tube B467-88(2003) - Standard Specification for Welded Copper-Nickel Pipe B468-04(2009) - Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes B470-02(2007) - Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment B472-04a(2009) - Standard Specification for Nickel Alloy Billets and Bars for Reforging B473-07 - Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire B474-03(2009) - Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe B475-07 - Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire B476-01(2006) - Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials B477-97(2008) - Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy B478-85(2008) - Standard Test Method for Cross Curvature of Thermostat Metals B479-06 - Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications B480-88(2006) - Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating B481-68(2008) - Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating B482-85(2008) - Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating B483/B483M-03 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications B487-85(2007) - Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section B488-01(2006) - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses B489-85(2008)e1 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals B490-09 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits B491/B491M-06 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications B493/B493M-08 - Standard Specification for Zirconium and Zirconium Alloy Forgings B494/B494M-08 - Standard Specification for Primary Zirconium B495-05 - Standard Specification for Zirconium and Zirconium Alloy Ingots B496-04 - Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors B497-00(2006) - Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts B498/B498M-08 - Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors B499-09 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals B500/B500M-09 - Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors B501-04 - Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application B502-02(2007) - Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced B504-90(2007) - Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method B505/B505M-08a - Standard Specification for Copper Alloy Continuous Castings B506-09 - Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction B507-86(2008)e1 - Standard Practice for Design of Articles to Be Electroplated on Racks B508-08 - Standard Specification for Copper Alloy Strip for Flexible Metal Hose B511-01(2009) - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes B512-04(2009) - Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars B514-05(2009) - Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe B515-95(2009) - Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes B516-03(2009) - Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes B517-05(2009) - Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe B520-93(2007) - Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application B521-98(2004) - Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes B522-01(2006) - Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy B523/B523M-07 - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes B524/B524M-99(2005) - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) B527-06 - Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds B528-05 - Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens B530-09 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates B532-85(2007) - Standard Specification for Appearance of Electroplated Plastic Surfaces B533-85(2004) - Standard Test Method for Peel Strength of Metal Electroplated Plastics B534-07 - Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar B535-06 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube B536-07 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip B537-70(2007) - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure B539-02(2008) - Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) B540-97(2008) - Standard Specification for Palladium Electrical Contact Alloy B541-01(2006) - Standard Specification for Gold Electrical Contact Alloy B542-07 - Standard Terminology Relating to Electrical Contacts and Their Use B543-07e1 - Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube B545-97(2004)e1 - Standard Specification for Electrodeposited Coatings of Tin B546-04(2009) - Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe B547/B547M-02 - Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube B548-03 - Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels B549-04 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW) B550/B550M-07 - Standard Specification for Zirconium and Zirconium Alloy Bar and Wire B551/B551M-07 - Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate B552-08 - Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants B555-86(2007) - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test B556-90(2007) - Standard Guide for Measurement of Thin Chromium Coatings by Spot Test B557-06 - Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products B557M-07e1 - Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric] B558-79(2008) - Standard Practice for Preparation of Nickel Alloys for Electroplating B559-93(2007) - Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application B560-00(2005) - Standard Specification for Modern Pewter Alloys B561-94(2005) - Standard Specification for Refined Platinum B562-95(2005) - Standard Specification for Refined Gold B563-01(2006) - Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy B564-06a - Standard Specification for Nickel Alloy Forgings B565-04 - Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods B566-04a - Standard Specification for Copper-Clad Aluminum Wire B567-98(2009) - Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method B568-98(2004) - Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry B569-09 - Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing B570-06 - Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions B571-97(2008)e1 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings B572-06 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod B573-06 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod B574-06e1 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod B575-06 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip B576-94(2005) - Standard Guide for Arc Erosion Testing of Electrical Contact Materials B577-93(2004)e1 - Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper B578-87(2004) - Standard Test Method for Microhardness of Electroplated Coatings B579-73(2004) - Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) B580-79(2009) - Standard Specification for Anodic Oxide Coatings on Aluminum B581-02(2008) - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod B582-07 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip B584-08a - Standard Specification for Copper Alloy Sand Castings for General Applications B587-08 - Standard Specification for Welded Brass Tube B588-88(2006) - Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique B589-94(2005) - Standard Specification for Refined Palladium B591-09 - Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar B592-01(2006) - Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar B593-96(2009)e1 - Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials B594-06 - Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications B595-95(2006) - Standard Specification for Sintered Aluminum Structural Parts B596-89(2006) - Standard Specification for Gold-Copper Alloy Electrical Contact Material B598-09 - Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys B599-92(2009)e1 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip B600-91(2002)e1 - Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces B601-09 - Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast B602-88(2005) - Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings B603-07 - Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements B604-91(2008) - Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics B605-95a(2004) - Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy B606-08 - Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced B607-91(2008) - Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use B608-07 - Standard Specification for Welded Copper-Alloy Pipe B609/B609M-99(2004) - Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes B610-08 - Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders B611-85(2005) - Standard Test Method for Abrasive Wear Resistance of Cemented Carbides B613-76(2006) - Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts B614-05 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces B615-79(2006) - Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts B616-96(2006) - Standard Specification for Refined Rhodium B617-98(2004) - Standard Specification for Coin Silver Electrical Contact Alloy B618/B618M-08 - Standard Specification for Aluminum-Alloy Investment Castings B619-06 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe B620-03(2008) - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip B621-02(2006) - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod B622-06 - Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube B624-07 - Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application B625-05 - Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip B626-06 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube B628-98(2004) - Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy B629-77(2008) - Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating B630-88(2006) - Standard Practice for Preparation of Chromium for Electroplating with Chromium B631-93(2004) - Standard Specification for Silver-Tungsten Electrical Contact Materials B632/B632M-08 - Standard Specification for Aluminum-Alloy Rolled Tread Plate B633-07 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel B634-88(2004)e1 - Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use B635-00(2004)e1 - Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited B636-84(2006)e1 - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer B637-06e1 - Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service B639-02(2008) - Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service B640-07 - Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service B643-00(2005) - Standard Specification for Copper-Beryllium Alloy Seamless Tube B644-05 - Standard Specification for Copper Alloy Addition Agents B645-07 - Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys B646-06a - Standard Practice for Fracture Toughness Testing of Aluminum Alloys B647-84(2006) - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage B648-78(2006) - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor B649-06 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire B650-95(2008) - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates B651-83(2006) - Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope B652/B652M-04 - Standard Specification for Niobium-Hafnium Alloy Ingots B653/B653M-06 - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings B654/B654M-04 - Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate B655/B655M-04 - Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire B657-05 - Guide for Metallographic Identification of Microstructure in Cemented Carbides B658/B658M-06 - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe B659-90(2008)e1 - Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings B660-08 - Standard Practices for Packaging/Packing of Aluminum and Magnesium Products B661-06 - Standard Practice for Heat Treatment of Magnesium Alloys B662-94(2006) - Standard Specification for Silver-Molybdenum Electrical Contact Material B663-94(2006) - Standard Specification for Silver-Tungsten Carbide Electrical Contact Material B664-90(2006) - Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material B665-08 - Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides B666/B666M-08 - Standard Practice for Identification Marking of Aluminum and Magnesium Products B667-97(2009) - Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance B668-05 - Standard Specification for UNS N08028 Seamless Pipe and Tube B670-07 - Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service B671-81(2005) - Standard Specification for Refined Iridium B672-02(2007) - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire B673-05e1 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe B674-05 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube B675-02(2007) - Standard Specification for UNS N08367 Welded Pipe B676-03(2009) - Standard Specification for UNS N08367 Welded Tube B677-05 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube B678-86(2006) - Standard Test Method for Solderability of Metallic-Coated Products B679-98(2004)e1 - Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use B680-80(2009) - Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution B682-01(2009) - Standard Specification for Standard Metric Sizes of Electrical Conductors B683-01(2006) - Standard Specification for Pure Palladium Electrical Contact Material B684-97(2008) - Standard Specification for Platinum-Iridium Electrical Contact Materials B685-01(2006) - Standard Specification for Palladium-Copper Electrical Contact Material B686/B686M-08 - Standard Specification for Aluminum Alloy Castings, High-Strength B687-99(2005)e1 - Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples B688-96(2009) - Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip B689-97(2008) - Standard Specification for Electroplated Engineering Nickel Coatings B690-02(2007) - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube B691-02(2007) - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire B692-90(2006) - Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material B693-91(2006) - Standard Specification for Silver-Nickel Electrical Contact Materials B694-03 - Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding B695-04 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel B696-00(2004)e1 - Standard Specification for Coatings of Cadmium Mechanically Deposited B697-88(2005) - Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings B698-02 - Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube B699-86(2008) - Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel B700-08 - Standard Specification for Electrodeposited Coatings of Silver for Engineering Use B701/B701M-06 - Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD) B702-93(2004) - Standard Specification for Copper-Tungsten Electrical Contact Material B703-05 - Standard Test Method for Apparent Density of Powders Using Arnold Meter B704-03(2009) - Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes B705-05(2009) - Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe B706-00(2006) - Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube B708-05 - Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip B709-04(2009) - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip B710-04(2009) - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe B711-05 - Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201) B712-93(2006) - Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials B715-96(2001) - Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications B717-96(2006) - Standard Specification for Refined Ruthenium B718-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip B719-00(2009) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar B722-06 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube B723-00(2009) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe B724-00(2006) - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument B725-05(2009) - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe B726-02(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube B727-04 - Standard Practice for Preparation of Plastics Materials for Electroplating B729-05(2009) - Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube B730-08 - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube B731-96(2006) - Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material B733-04 - Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal B734-97(2008) - Standard Specification for Electrodeposited Copper for Engineering Uses B735-06 - Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor B736-00(2006) - Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock B737-05 - Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire B738-03(2008) - Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors B739-03(2008) - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube B740-09 - Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip B742-90(2006) - Standard Specification for Fine Silver Electrical Contact Fabricated Material B743-06 - Standard Specification for Seamless Copper Tube in Coils B744/B744M-05 - Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe B745/B745M-97(2005) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains B746/B746M-02(2007) - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches B747-07 - Standard Specification for Copper-Zirconium Alloy Sheet and Strip B748-90(2006) - Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope B749-03(2009) - Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products B750-09 - Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings B751-08 - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube B752-06 - Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application B753-07 - Standard Specification for Thermostat Component Alloys B754-89(2005) - Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip B755-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip B756-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar B757-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe B758-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube B759-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube B760-07 - Standard Specification for Tungsten Plate, Sheet, and Foil B761-06 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation B762-90(2005) - Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings B763-08a - Standard Specification for Copper Alloy Sand Castings for Valve Applications B764-04 - Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) B765-03(2008) - Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings B766-86(2008) - Standard Specification for Electrodeposited Coatings of Cadmium B767-88(2006) - Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures B768-99(2004) - Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet B769-07 - Standard Test Method for Shear Testing of Aluminum Alloys B770-09 - Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications B771-87(2006) - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides B772-97(2008) - Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing) B773-96(2008) - Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies B774-00(2005)e1 - Standard Specification for Low Melting Point Alloys B775-08 - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe B776-07 - Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate B777-07 - Standard Specification for Tungsten Base, High-Density Metal B778-02(2007) - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW) B779-03(2009) - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) B780-98(2004) - Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy B781-93a(2006) - Standard Guide for Silver-Cadmium Oxide Contact Material B783-04 - Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts B784-01(2006) - Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables B786-08 - Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation B787/B787M-04 - Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation B788/B788M-04 - Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe B789/B789M-99(2005) - Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers B790/B790M-00(2006) - Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits B792-09 - Standard Specification for Zinc Alloys in Ingot Form for Slush Casting B793-09 - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds B794-97(2009) - Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements B795-07 - Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials B796-07 - Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications B797-93(2007) - Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts B798-95(2009) - Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography B799-95(2009) - Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor B800-05 - Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers B801-07 - Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation B802/B802M-08 - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) B803-08 - Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors B804-02(2007) - Standard Specification for UNS N08367 and UNS N08926 Welded Pipe B805-06 - Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire B806-08a - Standard Specification for Copper Alloy Permanent Mold Castings for General Applications B807/B807M-06 - Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys B808-05 - Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances B809-95(2008) - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur” B810-01a(2006) - Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons B811-02(2007) - Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding B812-96(2008) - Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications B813-00(2009) - Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube B814-06 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip B815-02(2006) - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod B816-00(2004)e1 - Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited B817-08 - Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components B818-03(2008) - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip B819-00(2006) - Standard Specification for Seamless Copper Tube for Medical Gas Systems B820-09 - Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip B821-02(2007) - Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis B822-02 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering B823-01 - Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts B824-09 - Standard Specification for General Requirements for Copper Alloy Castings B825-02(2008) - Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples B826-03 - Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes B827-05(2009)e1 - Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests B828-02 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings B829-04a(2009) - Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube B830-97(2003) - Standard Specification for Uniform Test Methods and Frequency B831-05 - Standard Test Method for Shear Testing of Thin Aluminum Alloy Products B832-93(2008) - Standard Guide for Electroforming with Nickel and Copper B833-06 - Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel B834-95(2009) - Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts B835-04 - Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction B836-00(2005) - Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction B837-01 - Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems B839-04 - Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method B840-99(2004) - Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits B841-99(2004) - Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits B842-99(2005) - Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits B843-07 - Standard Specification for Magnesium Alloy Anodes for Cathodic Protection B844-98(2004) - Standard Guide for Silver-Tin Oxide Contact Material B845-97(2008)e1 - Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts B846-06a - Standard Terminology for Copper and Copper Alloys B848-05 - Specification for Powder Forged (P/F) Ferrous Materials B849-02(2007) - Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement B850-98(2004) - Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement B851-04 - Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish B852-08 - Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel B853-07 - Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components B854-98(2004) - Standard Guide for Measuring Electrical Contact Intermittences B855-06 - Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel B856-03 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) B857-09 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) B858-06 - Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys B859-03(2008)e1 - Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis B860-09a - Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing B861-09 - Standard Specification for Titanium and Titanium Alloy Seamless Pipe B862-09 - Standard Specification for Titanium and Titanium Alloy Welded Pipe B863-09 - Standard Specification for Titanium and Titanium Alloy Wire B864/B864M-08 - Standard Specification for Corrugated Aluminum Box Culverts B865-04 - Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock B866-95(2008) - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion B867-95(2008) - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use B868-96(2008) - Standard Practice for Contact Performance Classification of Electrical Connection Systems B869-07 - Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire B870-08 - Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510) B871-01(2007) - Standard Test Method for Tear Testing of Aluminum Alloy Products B872-06 - Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip B873-01(2007) - Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 B874-96(2008) - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process B875-96(2008) - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process B877-96(2008) - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method B878-97(2009) - Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors B879-97(2008)e1 - Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys B880-03(2008) - Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys B881-09 - Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products B882-05 - Specification for Pre-Patinated Copper for Architectural Applications B883-05 - Standard Specification for Metal Injection Molding (MIM) Ferrous Materials B884-05 - Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications B885-09 - Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts B886-03(2008) - Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides B887-03(2008)e1 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides B888-08 - Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts B890-07 - Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry B891-98(2004) - Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins B892-03 - Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings B893-98(2008) - Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications B894-03 - Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings B895-05 - Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution B896-99(2005) - Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials B897-09 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Block and Half Block Ingot B898-05e1 - Standard Specification for Reactive and Refractory Metal Clad Plate B899-09 - Standard Terminology Relating to Non-ferrous Metals and Alloys B900-04 - Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies B901-04 - Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction B902-04a - Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction B903-00(2005) - Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement B904-00(2004) - Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding B905-00(2005) - Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test B906-02(2006) - Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip B907-09 - Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders B908-09 - Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot B909-00(2006) - Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products B910/B910M-07 - Standard Specification for Annealed Copper-Clad Steel Wire B911/B911M-05 - Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP) B912-02(2008)e1 - Standard Specification for Passivation of Stainless Steels Using Electropolishing B913-05 - Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors B914-03(2008) - Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel B915-01(2007) - Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating B916-01(2007) - Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal B917/B917M-08 - Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes B918/B918M-09 - Standard Practice for Heat Treatment of Wrought Aluminum Alloys B919-01(2006) - Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement B920-01(2006)e1 - Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution B921-08 - Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys B922-02(2008) - Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption B923-02(2008) - Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry B924-02(2006) - Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins B925-08 - Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens B926-03 - Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table B927/B927M-09 - Standard Specification for Brass Rod, Bar, and Shapes B928/B928M-07 - Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments B929-05 - Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar B930-03(2008) - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) B931-09 - Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts B932-04 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip B933-09 - Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials B934-04a - Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements B935-05 - Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials B936-08 - Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar B937-04 - Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) B938-04 - Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510) B939-05 - Standard Test Method for Radial Crushing Strength, B940-05 - Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces B941-05 - Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes B942-05 - Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations B943-09 - Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications B944-06 - Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) B945-06 - Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers B946-06 - Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products B947-06 - Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate B949-08 - Standard Specification for General Requirements for Zinc and Zinc Alloy Products B950-06 - Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys B951-09 - Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought B952/B952M-09 - Standard Specification for Zinc Alloys in Ingot Form for Spin Casting B953-07 - Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis B954-07 - Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry B955/B955M-08 - Standard Specification for Aluminum-Alloy Centrifugal Castings B956-07e2 - Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins B957-08 - Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors B958-08 - Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors B960-08 - Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc B961-08 - Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application B962-08 - Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle B963-08 - Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle B964-09 - Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel B965-09 - Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability B967/B967M-09 - Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire C282-99(2005) - Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test) C283-97(2008) - Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid C285-88(2005) - Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel C286-99(2004) - Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems C346-87(2009) - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials C374-70(2009) - Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) C375-58(2006) - Standard Classification of Water Used in Milling of Porcelain Enamel C385-58(2009) - Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils C448-88(2006) - Standard Test Methods for Abrasion Resistance of Porcelain Enamels C536-83(2009) - Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing C537-87(2009) - Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage C538-83(2009) - Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels C539-84(2006) - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method C614-74(2005) - Standard Test Method for Alkali Resistance of Porcelain Enamels C632-88(2006) - Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling C633-01(2008) - Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings C660-81(2005) - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling C664-87(2005) - Standard Test Methods for Thickness of Diffusion Coating C694-90a(2006) - Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution C703-72(2006) - Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum C715-90(2006) - Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis C743-87(2009) - Standard Test Method for Continuity of Porcelain Enamel Coatings C756-87(2006) - Standard Test Method for Cleanability of Surface Finishes C774-88(2006) - Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing C810-90(2006) - Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry C839-82(2005) - Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method C872-89(2005) - Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces D1730-09 - Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting D1731-09 - Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting D1732-03(2008) - Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting E159-06 - Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) E194-06 - Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders E252-06 - Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement E1338-97(2003) - Guide for Identification of Metals and Alloys in Computerized Material Property Databases F68-05e1 - Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices G2/G2M-06 - Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C] | ||