D69-06 - Standard Test Methods for Friction Tapes
D115-07 - Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
D117-02 - Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
D120-09 - Standard Specification for Rubber Insulating Gloves
D149-09 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D150-98(2004) - Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D176-07 - Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
D178-01(2005) - Standard Specification for Rubber Insulating Matting
D202-08 - Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
D229-09b - Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
D257-07 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials
D295-99(2004) - Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
D348-07 - Standard Test Methods for Rigid Tubes Used for Electrical Insulation
D349-07 - Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
D350-09 - Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
D351-97(2008)e1 - Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
D352-97(2008)e1 - Standard Test Methods for Pasted Mica Used in Electrical Insulation
D372-00(2006) - Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation
D374-99(2004) - Standard Test Methods for Thickness of Solid Electrical Insulation
D374M-99(2005) - Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
D411-08 - Standard Test Methods for Shellac Used for Electrical Insulation
D470-05 - Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
D495-99(2004) - Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D619-99(2004) - Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
D668-99(2004) - Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
D669-03 - Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
D709-01(2007) - Standard Specification for Laminated Thermosetting Materials
D710-97(2009)e1 - Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
D748-00(2005)e1 - Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
D784-08 - Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
D831-94(2004) - Standard Test Method for Gas Content of Cable and Capacitor Oils
D866-99(2004) - Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
D876-09 - Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D877-02(2007) - Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D878-01(2006) - Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D902-06 - Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
D922-00a(2006) - Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
D923-07 - Standard Practices for Sampling Electrical Insulating Liquids
D924-08 - Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D971-99a(2004) - Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
D982-05 - Standard Test Method for Organic Nitrogen in Paper and Paperboard
D1000-04e1 - Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1039-94(2004) - Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
D1047-07 - Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
D1048-05 - Standard Specification for Rubber Insulating Blankets
D1049-98(2002)e1 - Standard Specification for Rubber Insulating Covers
D1050-05e1 - Standard Specification for Rubber Insulating Line Hose
D1051-08 - Standard Specification for Rubber Insulating Sleeves
D1082-00(2005) - Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
D1168-08 - Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
D1169-09 - Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
D1275-06 - Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
D1305-99(2004) - Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type
D1351-08 - Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
D1389-07 - Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
D1458-01(2007) - Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1523-00(2006) - Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
D1524-94(2004) - Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
D1531-06 - Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1533-00(2005) - Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
D1534-95(2008) - Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
D1675-03 - Standard Test Methods for Polytetrafluoroethylene Tubing
D1676-03 - Standard Test Methods for Film-Insulated Magnet Wire
D1677-02(2007) - Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
D1698-03(2008) - Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
D1711-08 - Standard Terminology Relating to Electrical Insulation
D1807-00(2005) - Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids
D1816-04 - Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
D1825-03 - Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
D1830-99(2005) - Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
D1867-07 - Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
D1868-07 - Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
D1903-08 - Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
D1931-99(2004) - Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1932-04 - Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
D1933-03(2008) - Standard Specification for Nitrogen Gas as an Electrical Insulating Material
D1934-95(2005) - Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
D2029-97(2008) - Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
D2112-01a(2007) - Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
D2129-05 - Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
D2131-97(2008)e1 - Standard Classification for Natural Muscovite Mica Splittings
D2132-03 - Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
D2140-08 - Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
D2144-07 - Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
D2148-02(2008)e1 - Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
D2149-97(2004) - Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
D2219-02(2007)e1 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation
D2220-02(2007)e1 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation
D2225-04 - Standard Test Methods for Silicone Fluids Used for Electrical Insulation
D2275-01(2008)e1 - Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
D2284-95(2002) - Standard Test Method for Acidity of Sulfur Hexafluoride
D2296-01(2006) - Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
D2300-08 - Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
D2301-99(2004) - Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D2303-97(2004) - Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
D2304-97(2002) - Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
D2305-02 - Standard Test Methods for Polymeric Films Used for Electrical Insulation
D2307-07a - Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
D2308-07 - Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
D2400-99(2004) - Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
D2413-99(2005) - Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
D2440-99(2004) - Standard Test Method for Oxidation Stability of Mineral Insulating Oil
D2472-00(2006) - Standard Specification for Sulfur Hexafluoride
D2477-07 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
D2484-06 - Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
D2518-99(2004) - Standard Specification for Woven Glass Fabrics for Electrical Insulation
D2519-07 - Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2520-01 - Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650^oC
D2522-03(2008)e2 - Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
D2633-08 - Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
D2655-00(2006) - Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
D2656-06 - Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
D2668-07 - Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
D2671-09 - Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
D2685-95(2003) - Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
D2686-06 - Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
D2754-99(2004) - Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
D2756-07 - Standard Test Method for Weight Loss of Electrical Insulating Varnishes
D2759-00(2005) - Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
D2802-03 - Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
D2861-87(2004) - Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
D2864-09 - Standard Terminology Relating to Electrical Insulating Liquids and Gases
D2865M-06 - Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
D2902-00(2006) - Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
D2903-03 - Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D2945-90(2003)e2 - Standard Test Method for Gas Content of Insulating Oils
D3004-08 - Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
D3005-99(2004) - Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D3006-99(2004) - Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
D3032-04 - Standard Test Methods for Hookup Wire Insulation
D3056-05 - Standard Test Method for Gel Time of Solventless Varnishes
D3144-00(2006) - Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
D3145-08 - Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D3149-06 - Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3150-00(2006) - Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
D3251-04 - Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
D3277-95(2001)e1 - Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
D3283-98(2004) - Standard Specification for Air as an Electrical Insulating Material
D3284-05 - Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
D3288/D3288M-08 - Standard Test Methods for Magnet-Wire Enamels
D3300-00(2006) - Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
D3305-94(2005) - Standard Practice for Sampling Small Gas Volume in a Transformer
D3312-04 - Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
D3349-06 - Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
D3353-04 - Standard Test Methods for Fibrous-Insulated Magnet Wire
D3376-88(2005) - Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
D3377-04 - Standard Test Method for Weight Loss of Solventless Varnishes
D3380-90(2003) - Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
D3382-07 - Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
D3394-94(2005) - Standard Test Methods for Sampling and Testing Electrical Insulating Board
D3426-97(2004) - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
D3455-02 - Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
D3487-08 - Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
D3554-07 - Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
D3555-07 - Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation
D3612-02(2009) - Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
D3635-01(2005) - Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
D3636-06 - Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
D3638-07 - Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
D3664-04 - Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
D3755-97(2004) - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
D3756-97(2004) - Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
D3809-01(2006) - Standard Test Methods for Synthetic Dielectric Fluids For Capacitors
D3850-94(2006) - Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D3874-04 - Standard Test Method for Ignition of Materials by Hot Wire Sources
D3949-99(2004) - Standard Specification for Coated Glass Fabrics Used for Electrical Insulation
D3955-04 - Standard Specification for Electrical Insulating Varnishes
D4059-00(2005)e1 - Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
D4063-99(2004) - Standard Specification for Pressboard for Electrical Insulating Purposes
D4243-99(2004)e1 - Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
D4245-08 - Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
D4246-02 - Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
D4313-03 - Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
D4314-05 - Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
D4325-08 - Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4363-98(2003) - Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
D4388-08 - Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4470-97(2004) - Standard Test Method for Static Electrification
D4496-04e1 - Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
D4514-06 - Standard Specification for Friction Tape
D4559-99(2004) - Standard Test Method for Volatile Matter in Silicone Fluid
D4565-99(2004)e1 - Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4566-08 - Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4568-99(2004)e1 - Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
D4652-05 - Standard Specification for Silicone Fluid Used for Electrical Insulation
D4730-02(2008) - Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
D4731-02(2008)e1 - Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
D4732-02(2008)e1 - Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
D4733-03 - Standard Test Methods for Solventless Electrical Insulating Varnishes
D4768-03 - Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary- Butyl Phenol in Insulating Liquids by Gas Chromatography
D4872-99(2004)e1 - Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
D4880-08 - Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
D4881-05 - Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
D4882-05 - Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
D4967-99(2004)e1 - Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
D5032-97(2003) - Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
D5109-99(2004) - Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
D5213-07 - Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
D5222-08 - Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
D5282-05 - Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
D5288-97(2004) - Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
D5374-93(2005) - Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5423-93(2005) - Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5424-05 - Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5425-08 - Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
D5470-06 - Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
D5485-09 - Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
D5537-08 - Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5568-08 - Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
D5637-05 - Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes
D5638-05 - Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
D5642-09 - Standard Test Method for Sealed Tube Chemical Compatibility Test
D5837-99(2005) - Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
D6053-08 - Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
D6054-97(2004) - Standard Practice for Conditioning Electrical Insulating Materials for Testing
D6095-06 - Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
D6096-07 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation
D6097-01a(2008)e1 - Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
D6113-09 - Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
D6180-05 - Standard Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge
D6181-03 - Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
D6194-08 - Standard Test Method for Glow-Wire Ignition of Materials
D6343-99(2004) - Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
D6786-08 - Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
D6802-02 - Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
D6871-03(2008) - Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
D7129-09 - Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator
D7131-09 - Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
D7148-07 - Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
D7150-05 - Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress at Low Temperature
D7151-05 - Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7449/D7449M-08 - Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
F4-66(2005) - Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
F7-95(2006) - Standard Specification for Aluminum Oxide Powder
F15-04 - Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
F16-67(2006) - Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
F18-64(2006) - Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
F19-64(2005)e1 - Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
F29-97(2009) - Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
F30-96(2009) - Standard Specification for Iron-Nickel Sealing Alloys
F31-05 - Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy
F44-95(2006) - Standard Specification for Metallized Surfaces on Ceramic
F72-06 - Standard Specification for Gold Wire for Semiconductor Lead Bonding
F73-96(2009) - Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
F76-08 - Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
F83-71(2009) - Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters
F85-76(2009) - Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
F96-77(2005) - Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
F106-06 - Standard Specification for Brazing Filler Metals for Electron Devices
F180-94(2005) - Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
F204-76(2009) - Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
F205-94(2005) - Standard Test Method for Measuring Diameter of Fine Wire by Weighing
F219-96(2009) - Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
F256-05e1 - Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
F269-60(2009) - Standard Test Method for Sag of Tungsten Wire
F288-96(2009) - Standard Specification for Tungsten Wire for Electron Devices and Lamps
F289-96(2009) - Standard Specification for Molybdenum Wire and Rod for Electronic Applications
F290-94(2005) - Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
F364-96(2009) - Standard Specification for Molybdenum Flattened Wire for Electron Tubes
F375-89(2005) - Standard Specification for Integrated Circuit Lead Frame Material
F390-98(2003) - Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
F448-99(2005) - Test Method for Measuring Steady-State Primary Photocurrent
F458-06 - Standard Practice for Nondestructive Pull Testing of Wire Bonds
F459-06 - Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
F478-09 - Standard Specification for In-Service Care of Insulating Line Hose and Covers
F479-06 - Standard Specification for In-Service Care of Insulating Blankets
F487-88(2006) - Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding
F496-08 - Standard Specification for In-Service Care of Insulating Gloves and Sleeves
F526-97(2003) - Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests
F528-99(2005) - Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
F542-07 - Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
F584-06e1 - Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
F615M-95(2008) - Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
F616M-96(2003) - Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
F676-97(2003) - Standard Test Method for Measuring Unsaturated TTL Sink Current
F677-04 - Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
F696-06 - Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
F711-02(2007) - Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
F712-06 - Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
F744M-97(2003) - Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits [Metric]
F773M-96(2003) - Practice for Measuring Dose Rate Response of Linear Integrated Circuits [Metric]
F819-08 - Standard Terminology Relating to Electrical Protective Equipment for Workers
F855-09 - Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
F887-05e1 - Standard Specifications for Personal Climbing Equipment
F914-03 - Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments
F980M-96(2003) - Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices [Metric]
F996-98(2003) - Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics
F1094-87(2005) - Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
F1116-03(2008) - Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
F1117-03(2008) - Standard Specification for Dielectric Footwear
F1190-99(2005) - Standard Guide for Neutron Irradiation of Unbiased Electronic Components
F1192-00(2006) - Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
F1236-96(2007) - Standard Guide for Visual Inspection of Electrical Protective Rubber Products
F1238-95(2003) - Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
F1259M-96(2003) - Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]
F1260M-96(2003) - Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric]
F1262M-95(2008) - Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
F1263-99(2005) - Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
F1269-06 - Test Methods for Destructive Shear Testing of Ball Bonds
F1367-98(2003) - Standard Specification for Chromium Sputtering Targets for Thin Film Applications
F1372-93(2005) - Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1373-93(2005) - Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
F1374-92(2005) - Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
F1375-92(2005) - Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1376-92(2005) - Standard Guide for Metallurgical Analysis for Gas Distribution System Components
F1394-92(2005) - Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
F1396-93(2005) - Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
F1397-93(2005) - Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
F1398-93(2005) - Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
F1404-92(2007) - Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
F1430-03e1 - Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
F1438-93(2005) - Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
F1466-99(2005) - Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
F1467-99(2005) - Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
F1505-07 - Standard Specification for Insulated and Insulating Hand Tools
F1506-08 - Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
F1512-94(2003) - Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
F1513-99(2003) - Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
F1564-95(2006) - Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
F1578-07 - Standard Test Method for Contact Closure Cycling of a Membrane Switch
F1593-08 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
F1594-95(2003) - Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
F1595-00(2005) - Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
F1596-07 - Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
F1598-95(2007) - Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
F1661-09 - Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
F1662-04 - Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
F1663-09 - Standard Test Method for Determining the Capacitance of a Membrane Switch
F1680-07a - Standard Test Method for Determining Circuit Resistance of a Membrane Switch
F1681-07a - Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
F1683-09 - Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
F1684-06 - Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F1689-05 - Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
F1701-05 - Standard Specification for Unused Polypropylene Rope with Special Electrical Properties
F1709-97(2008) - Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
F1710-08 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1711-96(2008) - Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
F1742-03e1 - Standard Specification for PVC Insulating Sheeting
F1761-00(2005) - Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
F1762-07 - Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure
F1796-09 - Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
F1797-09 - Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
F1812-09 - Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
F1825-03(2007) - Standard Specification for Clampstick Type Live Line Tools
F1826-00(2006) - Standard Specification for Live Line and Measuring Telescoping Tools
F1842-09 - Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications
F1843-09 - Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
F1844-97(2008) - Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
F1845-08 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
F1891-06 - Standard Specification for Arc and Flame Resistant Rainwear
F1892-06 - Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
F1893-98(2003) - Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
F1894-98(2003) - Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
F1895-98(2004) - Practice for Submersion of a Membrane Switch
F1896-98(2004) - Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
F1958/F1958M-99(2005) - Standard Test Method for Determining the Ignitability of Non-flame-Resistance Materials for Clothing by Electric Arc Exposure Method Using Mannequins
F1959/F1959M-06ae1 - Standard Test Method for Determining the Arc Rating of Materials for Clothing
F1995-00(2005) - Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
F1996-06 - Standard Test Method for Silver Migration for Membrane Switch Circuitry
F2072-01(2007) - Standard Practice for Hosedown of a Membrane Switch
F2073-01(2006) - Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
F2112-02 - Standard Terminology for Membrane Switches
F2113-01(2007) - Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
F2174-02(2008) - Standard Practice for Verifying Acoustic Emission Sensor Response
F2178-08 - Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
F2187-02 - Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2188-02 - Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2249-03(2009) - Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
F2320-03 - Standard Specification for Rubber Insulating Sheeting
F2321-05 - Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
F2357-04 - Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader
F2358-04 - Standard Guide for Measuring Characteristics of Sapphire Substrates
F2359-04 - Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
F2360-08 - Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
F2405-04 - Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
F2522-05 - Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
F2592-09 - Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
F2621-06 - Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure
F2676-09 - Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
F2677-08a - Standard Specification for Electrically Insulating Aprons
F2715-09 - Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment
F2749-09 - Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
F2750-09 - Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
F2771-09 - Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions