ANS/ISO5359-00E - Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by ASTM International
ANS/ISO5361-99 - Anaesthetic and Respiratory Equipment—Tracheal Tubes and Connectors Approved as an American National Standard by ASTM International
ANS/ISO5366.1-00E - Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 1: Tubes and Connectors for Use in Adults Approved as an American National Standard by ASTM International
ANS/ISO5362-00 - Anaesthetic Reservoir Bags Approved as an American National Standard by ASTM International
ANS/ISO11195-95 - Gas Mixers for Medical Use—Stand-alone Gas Mixers Approved as an American National Standard with Deviations by ASTM international
ANS/ISO5360-93 - Anesthetic Vaporizes—Agent-Specific Filling Systems Approved as an American National Standard with Deviations by ASTM International
ANS/ISO15002-00 - Flow-metering devices for connection to terminal units of medical gas pipeline systems
ANS/IEC60601.2.12-01 - Medical Electrical Equipment—Part 2-12; Particular Requirements for the Safety of Lung Ventilators—Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International
ANS/ISO4135-01 - Anaesthetic and Respiratory Equipment— Vocabulary Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.1-99 - Medical Suction Equipment—Part 1: Electrically Powered Suction Equipment—Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.2-99 - Medical Suction Equipment—Part 2: Manually Powered Suction Equipment Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.3-99 - Medical Suction Equipment—Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International
E1202-87(2008) - Standard Guide for Development of Micronucleus Assay Standards
E1262-88(2008) - Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay
E1263-97(2008) - Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
E1280-97(2008) - Standard Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
E1397-91(2008) - Standard Practice for In Vitro Rat Hepatocyte DNA Repair Assay
E1398-91(2008) - Standard Practice for In Vivo Rat Hepatocyte DNA Repair Assay
E2363-06a - Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
E2474-06 - Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology
E2476-09 - Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
E2500-07 - Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
E2503-07 - Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus
E2537-08 - Standard Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing
F67-06 - Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F75-07 - Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F86-04 - Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
F90-09 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F116-00(2009) - Standard Specification for Medical Screwdriver Bits
F136-08e1 - Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
F138-08 - Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F139-08 - Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F366-04(2009) - Standard Specification for Fixation Pins and Wires
F382-99(2008)e1 - Standard Specification and Test Method for Metallic Bone Plates
F384-06e1 - Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F451-08 - Standard Specification for Acrylic Bone Cement
F452-76(2008) - Standard Specification for Preformed Cranioplasty Plates
F543-07e1 - Standard Specification and Test Methods for Metallic Medical Bone Screws
F560-08 - Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
F561-05a - Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
F562-07 - Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F564-02(2006)e1 - Standard Specification and Test Methods for Metallic Bone Staples
F565-04(2009)e1 - Standard Practice for Care and Handling of Orthopedic Implants and Instruments
F601-03(2008) - Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
F602-09 - Standard Criteria for Implantable Thermoset Epoxy Plastics
F619-03(2008) - Standard Practice for Extraction of Medical Plastics
F620-06 - Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
F621-08 - Standard Specification for Stainless Steel Forgings for Surgical Implants
F622-79(2002) - Standard Specification for Preformed Cranioplasty Plates That Can Be Altered
F623-99(2006) - Standard Performance Specification for Foley Catheter
F624-09 - Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
F629-02(2007)e1 - Standard Practice for Radiography of Cast Metallic Surgical Implants
F639-09 - Standard Specification for Polyethylene Plastics for Medical Applications
F640-07 - Standard Test Methods for Determining Radiopacity for Medical Use
F641-09 - Standard Specification for Implantable Epoxy Electronic Encapsulants
F647-94(2006) - Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
F648-07e1 - Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F665-09 - Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
F688-05 - Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
F700-93(2008) - Standard Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
F701-81(2008) - Standard Practice for Care and Handling of Neurosurgical Implants and Instruments
F702-98a(2003) - Standard Specification for Polysulfone Resin for Medical Applications
F703-07 - Standard Specification for Implantable Breast Prostheses
F719-81(2007)e1 - Standard Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation
F720-81(2007)e1 - Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
F732-00(2006) - Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F745-07 - Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
F746-04 - Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F748-06 - Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
F749-98(2007)e1 - Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
F750-87(2007)e1 - Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse
F754-08 - Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
F755-99(2005) - Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
F756-08 - Standard Practice for Assessment of Hemolytic Properties of Materials
F763-04 - Standard Practice for Short-Term Screening of Implant Materials
F799-06 - Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F813-07 - Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
F881-94(2006) - Standard Specification for Silicone Elastomer Facial Implants
F882-84(2002) - Standard Performance and Safety Specification for Cryosurgical Medical Instruments
F895-84(2006) - Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
F897-02(2007) - Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
F899-09 - Standard Specification for Wrought Stainless Steels for Surgical Instruments
F921-85(2008)e1 - Standard Terminology Relating to Hemostatic Forceps
F961-08 - Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
F981-04 - Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F982-86(2008) - Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
F983-86(2009) - Standard Practice for Permanent Marking of Orthopaedic Implant Components
F997-98a(2003) - Standard Specification for Polycarbonate Resin for Medical Applications
F1026-86(2008)e1 - Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
F1027-86(2007) - Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
F1031-00(2006) - Standard Practice for Training the Emergency Medical Technician (Basic)
F1044-05 - Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1058-08 - Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)
F1078-87(2008)e1 - Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
F1079-87(2008)e1 - Standard Specification for Inserted and Noninserted Surgical Scissors
F1086-94(2008) - Standard Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations
F1088-04ae1 - Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation
F1089-02 - Standard Test Method for Corrosion of Surgical Instruments
F1091-08 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
F1101-90(2003)e1 - Standard Specification for Ventilators Intended for Use During Anesthesia
F1108-04(2009) - Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1147-05 - Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings
F1149-93(2008) - Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services
F1160-05 - Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1177-02(2009) - Standard Terminology Relating to Emergency Medical Services
F1185-03(2009) - Standard Specification for Composition of Hydroxylapatite for Surgical Implants
F1208-89(2005) - Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
F1218-89(2007) - Standard Specification for Bronchoscopes (Rigid)
F1220-95(2006) - Standard Guide for Emergency Medical Services System (EMSS) Telecommunications
F1221-89(2006) - Standard Guide for Interagency Information Exchange
F1223-08 - Standard Test Method for Determination of Total Knee Replacement Constraint
F1224-89(2004)e1 - Standard Guide for Providing System Evaluation for Emergency Medical Services
F1229-01(2006) - Standard Guide for the Qualification and Training of EMS Air-Medical Patient Care Providers
F1246-91(2005) - Standard Specification for Electrically Powered Home Care Ventilators, Part 1-Positive-Pressure Ventilators and Ventilator Circuits
F1251-89(2003) - Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
F1255-90(2008) - Standard Practice for Performance of Prehospital Automated Defibrillation
F1256-90(2008) - Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Basic Life Support/Emergency Medical Technician (BLS/EMT) Training Programs
F1257-90(2008) - Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs
F1258-95(2006) - Standard Practice for Emergency Medical Dispatch
F1264-03(2007)e2 - Standard Specification and Test Methods for Intramedullary Fixation Devices
F1266-89(2008) - Standard Performance Specification for Cerebral Stereotactic Instruments
F1268-90(2008) - Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
F1285-90(2008) - Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques
F1286-90(2009) - Standard Guide for Development and Operation of Level 1 Pediatric Trauma Facilities
F1287-90(2007) - Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
F1288-90(2009) - Standard Guide for Planning for and Response to a Multiple Casualty Incident
F1295-05 - Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1314-07 - Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1325-91(2008)e1 - Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1339-92(2008) - Standard Guide for Organization and Operation of Emergency Medical Services Systems
F1343-02 - Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems
F1350-08 - Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
F1357-09 - Standard Specification for Articulating Total Wrist Implants
F1377-08 - Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F1378-05 - Standard Specification for Shoulder Prosthesis
F1408-97(2008) - Standard Practice for Subcutaneous Screening Test for Implant Materials
F1422-08 - Standard Guide for Using the Incident Command System Framework in Managing Search and Rescue Operations
F1439-03(2008) - Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
F1440-92(2008) - Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion
F1441-03(2009) - Standard Specification for Soft-Tissue Expander Devices
F1453-92(2008) - Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care
F1464-93(2005) - Standard Specification for Oxygen Concentrators for Domiciliary Use
F1472-08e1 - Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1490-04a - Standard Terminology Relating to Search and Rescue
F1493-93(2008) - Standard Guide for Financing and Financial Accountability of Medical Transportation Systems
F1517-94(2007) - Standard Guide for Scope of Performance of Emergency Medical Services Ambulance Operations
F1536-95(2005) - Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
F1537-08 - Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1538-03(2009) - Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
F1541-02(2007)e1 - Standard Specification and Test Methods for External Skeletal Fixation Devices
F1549-94(2005) - Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities
F1552-94(2009) - Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers
F1555-94(2007) - Standard Guide for Characteristics for Extremity Splints
F1556-94(2007) - Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics
F1557-94(2007) - Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics
F1558-94(2007) - Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)
F1559-94(2007) - Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)
F1560-00(2006) - Standard Practice for Emergency Medical Dispatch Management
F1579-02e1 - Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
F1580-07 - Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F1581-08e1 - Standard Specification for Composition of Anorganic Bone for Surgical Implants
F1582-98(2003) - Standard Terminology Relating to Spinal Implants
F1583-95(2006) - Standard Practice for Communications Procedures-Phonetics
F1584-95(2003) - Standard Practice for Marking Buildings During Disaster Search Operations
F1586-08 - Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
F1591-95(2006) - Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
F1609-08 - Standard Specification for Calcium Phosphate Coatings for Implantable Materials
F1611-00(2009) - Standard Specification for Intramedullary Reamers
F1612-95(2005) - Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion
F1613-95(2008)e1 - Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
F1616-95(2009) - Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
F1629-95(2007) - Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both
F1633-97(2008) - Standard Guide for Techniques in Land Search
F1634-95(2008) - Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
F1635-04a - Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
F1638-95(2008)e1 - Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
F1651-95(2009) - Standard Guide for Training the Emergency Medical Technician (Paramedic)
F1652-95(2007) - Standard Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services
F1653-95(2007) - Standard Guide for Scope of Performance of Triage in a Prehospital Environment
F1654-95(2007) - Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
F1655-95(2007) - Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings
F1672-95(2005) - Standard Specification for Resurfacing Patellar Prosthesis
F1690-96(2004) - Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems
F1705-96(2007) - Standard Guide for Training Emergency Medical Services Ambulance Operations
F1713-08 - Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
F1714-96(2008) - Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
F1717-09 - Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
F1719-96(2008) - Standard Specification for Image-Interactive Stereotactic and Localization Systems
F1728-96(2007) - Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position
F1729-96(2007) - Standard Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position
F1730-96(2002) - Standard Guide for Throwing a Water Rescue Throwbag
F1739-96(2007) - Standard Guide for Performance of a Water Rescuer-Level I
F1740-96(2007) - Standard Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
F1744-96(2008)e1 - Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
F1764-97(2007) - Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
F1765-97a(2007) - Standard Guide for Ice Staff Self-Rescue Technique
F1766-97a(2007) - Standard Guide for Ice Awls Self-Rescue Technique
F1767-98(2005) - Standard Guide for Forms Used for Search and Rescue
F1768-97(2007) - Standard Guide for Using Whistle Signals During Rope Rescue Operations
F1772-99(2005) - Standard Specification for Climbing Harnesses
F1773-09 - Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices
F1774-99(2005) - Standard Specification for Climbing and Mountaineering Carabiners
F1775-97(2004) - Standard Specification for Labeling of Climbing and Mountaineering Equipment
F1781-03(2009) - Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
F1783-97(2007) - Standard Guide for Performance of an Ice Rescuer-Level II
F1798-97(2008) - Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
F1800-07 - Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
F1801-97(2004) - Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
F1813-06 - Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
F1814-97a(2009) - Standard Guide for Evaluating Modular Hip and Knee Joint Components
F1820-97(2009) - Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
F1823-97(2007) - Standard Guide for Water Rescue Personal Flotation Device (PFD)
F1824-97(2007) - Standard Guide for Performance of a Water Rescuer-Level II
F1828-97(2006) - Standard Specification for Ureteral Stents
F1829-98(2009) - Standard Test Method for Static Evaluation of the Glenoid Locking Mechanism in Shear
F1830-97(2005) - Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps
F1831-97(2006) - Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
F1839-08e1 - Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
F1840-98a(2004) - Standard Terminology for Surgical Suture Needles
F1841-97(2005) - Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
F1846-98(2008) - Standard Practice for Symbols and Markings for Use With Land Search Maps
F1847-98(2005) - Standard Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers
F1848-98(2005) - Standard Classification for Search and Rescue Dog Crew/Teams
F1850-00(2005) - Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components
F1854-09 - Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
F1855-00(2005) - Standard Specification for Polyoxymethylene (Acetal) for Medical Applications
F1874-98(2004) - Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
F1875-98(2004) - Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface
F1876-98(2003)e1 - Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
F1877-05 - Standard Practice for Characterization of Particles
F1879-98(2005) - Standard Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs
F1903-98(2003) - Standard Practice for Testing for Biological Responses to Particles In Vitro
F1904-98(2008) - Standard Practice for Testing the Biological Responses to Particles
F1905-98(2003) - Standard Practice for Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity
F1906-98(2003) - Standard Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte, Proliferation, and Cell Migration
F1925-09 - Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
F1926/F1926M-08 - Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
F1949-99(2007) - Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
F1956-99(2005) - Standard Specification for Rescue Carabiners
F1978-00(2007)e2 - Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
F1983-99(2008) - Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
F1984-99(2008) - Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials
F1992-99(2007) - Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
F1993-99(2005) - Standard Classification of Human Search and Rescue Resources
F2003-02(2008) - Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
F2004-05 - Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2005-05 - Standard Terminology for Nickel-Titanium Shape Memory Alloys
F2009-00(2005) - Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2020-02a(2009) - Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances
F2025-06 - Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
F2026-08 - Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
F2027-08 - Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products
F2028-08 - Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
F2033-05 - Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
F2038-00(2005) - Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials
F2042-00(2005) - Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
F2047-00(2006) - Standard Practice for Workers' Compensation Coverage of Emergency Services Volunteers
F2051-00(2006) - Standard Specification for Implantable Saline Filled Breast Prosthesis
F2052-06e1 - Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F2062-00(2006) - Standard Specification for Square Drive Interconnections on Surgical Instruments
F2063-05 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F2064-00(2006)e1 - Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Products Application
F2065-00(2006) - Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
F2066-08 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
F2068-09 - Standard Specification for Femoral Prostheses—Metallic Implants
F2076-01(2006) - Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
F2077-03 - Test Methods For Intervertebral Body Fusion Devices
F2079-09 - Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
F2081-06 - Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
F2082-06 - Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
F2083-08e1 - Standard Specification for Total Knee Prosthesis
F2091-01(2006) - Standard Specification for Acetabular Prostheses
F2099-01(2007) - Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
F2102-06e1 - Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
F2103-01(2007)e2 - Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
F2116-01(2007) - Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope
F2118-03(2009) - Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
F2119-07 - Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
F2129-08 - Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
F2131-02(2007)e1 - Standard Test Method forIn Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
F2132-01(2008)e1 - Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
F2146-07 - Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
F2147-01(2006) - Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
F2148-07e1 - Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
F2149-01(2007) - Standard Test Method for Automated Analyses of Cells-the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
F2150-07 - Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
F2171-02(2009) - Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings
F2172-02 - Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers
F2180-02(2007)e2 - Standard Specification for Metallic Implantable Strands and Cables
F2181-09 - Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
F2182-02a - Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
F2183-02(2008) - Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
F2193-02(2007) - Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
F2196-02 - Standard Specification for Circulating Liquid and Forced Air Patient Temperature Management Devices
F2209-03 - Standard Guide for Training of Level I Land Search Team Member
F2210-02 - Standard Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products
F2211-04 - Standard Classification for Tissue Engineered Medical Products (TEMPs)
F2212-09 - Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
F2213-06 - Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
F2214-02(2008) - Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
F2224-09 - Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
F2229-07 - Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
F2255-05 - Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
F2256-05 - Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
F2257-09 - Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
F2258-05 - Standard Test Method for Strength Properties of Tissue Adhesives in Tension
F2259-03(2008) - Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (¹H NMR) Spectroscopy
F2260-03(2008) - Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (¹H NMR) Spectroscopy
F2266-03(2008)e1 - Standard Specification for Masses Used in Testing Rescue Systems and Components
F2267-04 - Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
F2311-08 - Standard Guide for Classification of Therapeutic Skin Substitutes
F2312-04 - Standard Terminology Relating to Tissue Engineered Medical Products
F2313-08e1 - Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
F2315-03 - Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
F2318-04 - Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2319-04 - Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2345-03(2008) - Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
F2346-05 - Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
F2347-03 - Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
F2381-04 - Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
F2382-04e1 - Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
F2383-05 - Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
F2384-05 - Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
F2385-04 - Standard Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
F2386-04 - Standard Guide for Preservation of Tissue Engineered Medical Products (TEMPs)
F2392-04 - Standard Test Method for Burst Strength of Surgical Sealants
F2393-04 - Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
F2394-07 - Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
F2423-05 - Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
F2428-04 - Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
F2436-05 - Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
F2450-09 - Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
F2451-05 - Standard Guide forin vivo Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage
F2458-05 - Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
F2459-05 - Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
F2477-07 - Standard Test Methods forin vitro Pulsatile Durability Testing of Vascular Stents
F2491-05 - Standard Guide for Determining Load Ratios for Technical Rescue Systems and Equipment
F2502-05 - Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
F2503-08 - Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
F2504-05 - Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices
F2514-08 - Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
F2516-07e2 - Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
F2527-05e1 - Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
F2528-06 - Standard Test Methods for Enteral Feeding Devices with a Retention Balloon
F2537-06 - Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
F2560-06 - Standard Specification for Supralaryngeal Airways and Connectors
F2565-06 - Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
F2567-06 - Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials
F2579-08 - Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
F2580-09 - Standard Test Method for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis
F2581-07 - Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
F2582-08 - Standard Test Method for Impingement of Acetabular Prostheses
F2602-08e1 - Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2603-06 - Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds
F2605-08e1 - Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2606-08 - Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
F2624-07 - Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants
F2625-07 - Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
F2633-07 - Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
F2662-08 - Standard Guide for Minimum Training of Dispatchers and Telecommunicators of SAR Incidents
F2664-07 - Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
F2665-09 - Standard Specification for Total Ankle Replacement Prosthesis
F2684-07 - Standard Test Method for Portable High Anchor Devices
F2685-07 - Standard Guide for Training of a Level II Land Search Team Member
F2694-07 - Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
F2695-07 - Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
F2706-08 - Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
F2721-09 - Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects
F2722-08 - Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
F2723-08 - Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
F2724-08 - Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
F2726-08 - Standard specification for fixation devices for tracheal tubes and other airway devices
F2739-08 - Standard Guide for Quantitating Cell Viability Within Biomaterial Scaffolds
F2751-09 - Standard Guide for Training of Support Level Land Rescue Team Member (LRT-Support) Member
F2752-09 - Standard Guide for Training for Level I Rope Rescue (R1) Rescuer Endorsement
F2754/F2754M-09 - Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire
F2759-09 - Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
F2791-09 - Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
ISO5366.3-03 - Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 3: Paediatric Tracheostomy Tubes