A627-03 - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
C16-03(2008)e1 - Standard Test Method for Load Testing Refractory Shapes at High Temperatures
C20-00(2005) - Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C24-09 - Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C27-98(2008) - Standard Classification of Fireclay and High-Alumina Refractory Brick
C71-08 - Standard Terminology Relating to Refractories
C92-95(2005) - Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C108-46(2009) - Standard Symbols for Heat Transmission
C113-02(2008) - Standard Test Method for Reheat Change of Refractory Brick
C133-97(2008)e1 - Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134-95(2005) - Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135-96(2009)e1 - Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C146-94a(2004) - Standard Test Methods for Chemical Analysis of Glass Sand
C147-86(2005) - Standard Test Methods for Internal Pressure Strength of Glass Containers
C148-00(2006) - Standard Test Methods for Polariscopic Examination of Glass Containers
C149-86(2005) - Standard Test Method for Thermal Shock Resistance of Glass Containers
C155-97(2007) - Standard Classification of Insulating Firebrick
C158-02(2007) - Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C162-05 - Standard Terminology of Glass and Glass Products
C169-92(2005) - Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C179-09 - Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181-09 - Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C182-88(2009) - Standard Test Method for Thermal Conductivity of Insulating Firebrick
C198-02(2008) - Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199-84(2005) - Standard Test Method for Pier Test for Refractory Mortars
C201-93(2009) - Standard Test Method for Thermal Conductivity of Refractories
C202-93(2009)e1 - Standard Test Method for Thermal Conductivity of Refractory Brick
C210-95(2007)e1 - Standard Test Method for Reheat Change of Insulating Firebrick
C224-78(2009) - Standard Practice for Sampling Glass Containers
C225-85(2004) - Standard Test Methods for Resistance of Glass Containers to Chemical Attack
C242-01(2007) - Standard Terminology of Ceramic Whitewares and Related Products
C271/C271M-05 - Standard Test Method for Density of Sandwich Core Materials
C272-01(2007) - Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C273/C273M-07a - Standard Test Method for Shear Properties of Sandwich Core Materials
C274-07 - Standard Terminology of Structural Sandwich Constructions
C288-87(2009) - Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C297/C297M-04 - Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C322-09 - Standard Practice for Sampling Ceramic Whiteware Clays
C323-56(2006) - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324-01(2007) - Standard Test Method for Free Moisture in Ceramic Whiteware Clays
C325-07 - Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
C326-09 - Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329-88(2006) - Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C336-71(2005) - Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338-93(2008) - Standard Test Method for Softening Point of Glass
C357-07(2009)e1 - Standard Test Method for Bulk Density of Granular Refractory Materials
C363/C363M-09 - Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
C364/C364M-07 - Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365/C365M-05 - Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366/C366M-05 - Standard Test Methods for Measurement of Thickness of Sandwich Cores
C368-88(2006) - Standard Test Method for Impact Resistance of Ceramic Tableware
C370-88(2006) - Standard Test Method for Moisture Expansion of Fired Whiteware Products
C371-09 - Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372-94(2007) - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
C373-88(2006) - Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C393/C393M-06 - Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C394-00(2008) - Standard Test Method for Shear Fatigue of Sandwich Core Materials
C401-91(2005) - Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C408-88(2006) - Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C416-97(2007) - Standard Classification of Silica Refractory Brick
C417-05 - Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C424-93(2006) - Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C429-01(2006) - Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C454-83(2007) - Standard Practice for Disintegration of Carbon Refractories by Alkali
C455-07 - Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456-93(2008) - Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C467-97(2008) - Standard Classification of Mullite Refractories
C480/C480M-08 - Standard Test Method for Flexure Creep of Sandwich Constructions
C481-99(2005) - Standard Test Method for Laboratory Aging of Sandwich Constructions
C482-02(2009) - Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C484-99(2009) - Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485-09 - Standard Test Method for Measuring Warpage of Ceramic Tile
C492-92(2008) - Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C499-09 - Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C501-84(2002) - Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502-09 - Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C544-03(2008) - Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
C545-97(2007) - Standard Classification of Zircon Refractories
C554-93(2006) - Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C557-03e1 - Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C577-07e1 - Standard Test Method for Permeability of Refractories
C583-05(2009) - Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584-81(2006) - Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C598-93(2008) - Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C600-85(2005) - Standard Test Method of Thermal Shock Test on Glass Pipe
C601-85(2005) - Standard Test Method for Pressure Test on Glass Pipe
C604-02(2007)e1 - Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607-88(2005) - Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C609-07 - Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
C613/C613M-97(2008) - Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C621-09 - Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C623-92(2005) - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C627-93(2007) - Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C648-04(2009) - Standard Test Method for Breaking Strength of Ceramic Tile
C650-04(2009) - Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
C657-93(2008) - Standard Test Method for D-C Volume Resistively of Glass
C673-97(2008) - Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674-88(2006) - Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675-91(2006) - Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676-04(2009) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C689-09 - Standard Test Method for Modulus of Rupture of Unfired Clays
C690-09 - Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
C693-93(2008) - Standard Test Method for Density of Glass by Buoyancy
C704/C704M-09e1 - Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C724-91(2005) - Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C729-05 - Standard Test Method for Density of Glass by the Sink-Float Comparator
C730-98(2008) - Standard Test Method for Knoop Indentation Hardness of Glass
C735-04(2009) - Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C738-94(2006) - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C767-93(2009) - Standard Test Method for Thermal Conductivity of Carbon Refractories
C770-98(2008) - Standard Test Method for Measurement of Glass Stress—Optical Coefficient
C773-88(2006) - Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C777-04(2009) - Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C813-90(2004) - Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C824-91(2005) - Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
C829-81(2005) - Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830-00(2006)e1 - Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831-98(2008) - Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832-00(2005) - Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C837-09 - Standard Test Method for Methylene Blue Index of Clay
C848-88(2006) - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
C849-88(2006) - Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C860-00(2005) - Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861-93(2005) - Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862-02(2008) - Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863-00(2005) - Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C865-02(2007) - Standard Practice for Firing Refractory Concrete Specimens
C866-77(2006) - Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
C867-94(2007) - Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C874-99(2009) - Standard Practice for Rotary Slag Testing of Refractory Materials
C885-87(2007) - Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C895-87(2009) - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C899-79(2007) - Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380)
C903-08 - Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
C909-93(2005) - Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C912-93(2008) - Standard Practice for Designing a Process for Cleaning Technical Glasses
C914-09 - Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C925-09 - Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C927-80(2009) - Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C949-80(2007) - Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C958-92(2007) - Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C965-96(2007) - Standard Practice for Measuring Viscosity of Glass Above the Softening Point
C973-87(2009) - Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974-87(2009) - Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975-87(2009) - Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C978-04(2009) - Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C987-00a(2005) - Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
C1023-09 - Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1026-87(2002) - Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
C1027-99(2004) - Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1028-07 - Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1036-06 - Standard Specification for Flat Glass
C1048-04 - Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
C1053-00(2005) - Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1054-03(2008) - tandard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1069-09 - Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070-01(2007) - Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1099-07 - Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1113/C1113M-09 - Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1145-06 - Standard Terminology of Advanced Ceramics
C1161-02c(2008)e1 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1171-05 - Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172-09 - Standard Specification for Laminated Architectural Flat Glass
C1175-99a(2004) - Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1182-09 - Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1190-95(2005) - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1198-08e1 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1203-04(2009) - Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1211-02(2008) - Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212-98(2004) - Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1223-09 - Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1239-07 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1243-93(2009) - Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1256-93(2008) - Standard Practice for Interpreting Glass Fracture Surface Features
C1259-08e1 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1273-05 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-00(2006) - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-00(2005)e1 - Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1279-09 - Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1282-08 - Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1291-00a(2005) - Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292-00(2005) - Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1300-95(2007) - Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C1322-05be1 - Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-96(2001)e1 - Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1326-08e1 - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-08 - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1331-01(2007) - Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332-01(2007) - Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1336-96(2008) - Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337-96(2005) - Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1341-06 - Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1349-04 - Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1350M-96(2008) - Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa·s to Approximately 10 ¹³ Pa·s) by Beam Bending (Metric)
C1351M-96(2007) - Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa·s and 10⁸ Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
C1358-05 - Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
C1359-05 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
C1360-01(2007) - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-01(2007) - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1366-04(2009) - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1368-06 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1376-03 - Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1377-97(2009) - Standard Test Method for Calibration of Surface/Stress Measuring Devices
C1378-04(2009) - Standard Test Method for Determination of Resistance to Staining
C1407-98(2005) - Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1419-99a(2009) - Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421-09 - Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1422-99(2005)e1 - Standard Specification for Chemically Strengthened Flat Glass
C1424-04 - Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-05 - Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426-99(2004) - Standard Practices for Verification and Calibration of Polarimeters
C1443-99(2005) - Standard Specification for Glasses, Portlight, Circular, Fully Tempered
C1445-07 - Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-07 - Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1464-06 - Standard Specification for Bent Glass
C1465-08 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1466-00(2007) - Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
C1468-06 - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-00(2005) - Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-06 - Standard Guide for Testing the Thermal Properties of Advanced Ceramics
C1494-01(2007) - Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-07 - Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1499-09 - Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1503-08 - Standard Specification for Silvered Flat Glass Mirror
C1505-01(2007) - Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
C1509-02(2007) - Standard Specification for Beaded Process Glass Pipe and Fittings
C1510-01(2007) - Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
C1525-04(2009) - Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1545-02(2007) - Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
C1547-02(2007) - Standard Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02(2007) - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
C1557-03(2008) - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
C1576-05 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1605-04 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
C1606-04 - Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
C1607-06 - Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware
C1624-05 - Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1648-06 - Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
C1649-08 - Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
C1650-07 - Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
C1651-08 - Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
C1652/C1652M-06 - Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
C1655-06 - Standard Classification of Fireclay and High-Alumina Mortars
C1656-07 - Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
C1674-08 - Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1678-09 - Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1683-08 - Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684-08 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength
D116-86(2006) - Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
D459-09 - Standard Terminology Relating to Soaps and Other Detergents
D460-91(2005) - Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
D500-95(2003) - Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
D501-03 - Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
D502-89(2003) - Standard Test Method for Particle Size of Soaps and Other Detergents
D528-97(2007) - Standard Test Method for Machine Direction of Paper and Paperboard
D585-97(2007) - Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
D589-97(2007) - Standard Test Method for Opacity of Paper (15° Diffuse Illuminant A, 89 % Reflectance Backing and Paper Backing)
D642-00(2005)e1 - Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
D643-97(2007) - Standard Test Method for Folding Endurance of Paper by the Schopper Tester
D644-99(2007) - Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying
D645/D645M-97(2007) - Standard Test Method for Thickness of Paper and Paperboard
D646-96(2007) - Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
D685-93(2007) - Standard Practice for Conditioning Paper and Paper Products for Testing
D686-93(2007) - Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
D689-03 - Standard Test Method for Internal Tearing Resistance of Paper
D722-93(2007) - Standard Test Method for Grease Resistance of Paper
D724-99(2003) - Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
D726-94(2003) - Standard Test Method for Resistance of Nonporous Paper to Passage of Air
D727-96(2006) - Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
D774/D774M-97(2007) - Standard Test Method for Bursting Strength of Paper
D776-92(2001) - Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
D778-97(2007) - Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
D779-03 - Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method
D780-95(2003) - Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
D800-05 - Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
D820-93(2003) - Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
D824-94(2007) - Standard Test Method for Rate of Absorption of Water by Bibulous Papers
D880-92(2008) - Standard Test Method for Impact Testing for Shipping Containers and Systems
D891-09 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
D896-04 - Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
D897-08 - Standard Test Method for Tensile Properties of Adhesive Bonds
D899-00(2007) - Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
D903-98(2004) - Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
D904-99(2008) - Standard Practice for Exposure of Adhesive Specimens to Artificial Light
D905-08e1 - Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
D906-98(2004) - Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
D907-08b - Standard Terminology of Adhesives
D918-99(2008) - Standard Test Method for Blocking Resistance of Paper and Paperboard
D928-03 - Standard Specification for Sodium Bicarbonate
D950-03 - Standard Test Method for Impact Strength of Adhesive Bonds
D951-99(2004) - Standard Test Method for Water Resistance of Shipping Containers by Spray Method
D984-97(2007) - Standard Test Methods for Reducible Sulfur in Paper
D985-97(2007) - Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
D996-04 - Standard Terminology of Packaging and Distribution Environments
D999-08 - Standard Test Methods for Vibration Testing of Shipping Containers
D1002-05 - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
D1030-95(2007) - Standard Test Method for Fiber Analysis of Paper and Paperboard
D1062-08 - Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
D1084-08 - Standard Test Methods for Viscosity of Adhesives
D1101-97a(2006) - Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
D1119-05 - Standard Test Method for Percent Ash Content of Engine Coolants
D1120-08 - Standard Test Method for Boiling Point of Engine Coolants
D1121-07 - Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
D1122-08 - Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1123-99(2003)e1 - Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D1144-99(2005) - Standard Practice for Determining Strength Development of Adhesive Bonds
D1146-00(2007) - Standard Test Method for Blocking Point of Potentially Adhesive Layers
D1151-00(2006) - Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
D1172-95(2007) - Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
D1173-07 - Standard Test Method for Foaming Properties of Surface-Active Agents
D1176-98(2008) - Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
D1177-07 - Standard Test Method for Freezing Point of Aqueous Engine Coolants
D1183-03 - Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
D1184-98(2004) - Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
D1185-98a(2009) - Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D1223-93(2006) - Standard Test Method for Specular Gloss of Paper and Paperboard at 75°
D1224-92(2006) - Standard Test Methods for Zinc and Cadmium in Paper
D1280-00(2007) - Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
D1287-91(2002) - Standard Test Method for pH of Engine Coolants and Antirusts
D1290-95(2008) - Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
D1304-99(2005) - Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
D1331-89(2001) - Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D1337-04 - Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
D1338-99(2005) - Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
D1384-05e1 - Standard Test Method for Corrosion Test for Engine Coolants in Glassware
D1386-98(2004) - Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
D1387-89(2007) - Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
D1434-82(2009)e1 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D1436-97(2008) - Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
D1455-87(2008) - Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
D1488-00(2006) - Standard Test Method for Amylaceous Matter in Adhesives
D1489-97(2004) - Standard Test Method for Nonvolatile Content of Aqueous Adhesives
D1490-01(2006) - Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
D1516-05 - Standard Test Method for Width of Leather
D1517-06 - Standard Terminology Relating to Leather
D1568-05 - Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
D1569-05 - Standard Test Methods for Detergent Alkylate
D1570-95(2003) - Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
D1579-01(2008) - Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
D1582-98(2004) - Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
D1583-01(2008) - Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
D1596-97(2003) - Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
D1610-01(2007) - Standard Practice for Conditioning Leather and Leather Products for Testing
D1611-00(2005) - Standard Test Method for Corrosion Produced by Leather in Contact with Metal
D1681-05 - Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
D1749-93(2007) - Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
D1767-89(2003) - Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
D1768-89(2003) - Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
D1779-98(2004) - Standard Specification for Adhesive for Acoustical Materials
D1780-05 - Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
D1781-98(2004) - Standard Test Method for Climbing Drum Peel for Adhesives
D1791-93(2008) - Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
D1792-06 - Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
D1793-92(2008) - Standard Test Method for Water Spotting of Emulsion Floor Polishes
D1813-00(2005) - Standard Test Method for Measuring Thickness of Leather Test Specimens
D1814-70(2005) - Standard Test Method for Measuring Thickness of Leather Units
D1815-00(2005) - Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
D1828-01(2007) - Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
D1874-62(2004) - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
D1875-03(2008)e1 - Standard Test Method for Density of Adhesives in Fluid Form
D1876-08 - Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
D1879-06 - Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
D1881-97(2002)e2 - Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
D1882-96(2006) - Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
D1901-00(2004) - Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
D1912-00(2005)e1 - Standard Test Method for Cold-Crack Resistance of Upholstery Leather
D1913-00(2005) - Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
D1968-02a(2007) - Standard Terminology Relating to Paper and Paper Products
D1974-98(2003) - Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
D1975-95(2006) - Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
D1986-91(2007) - Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
D1994-07 - Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
D1995-92(2004) - Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
D2019-97(2007) - Standard Test Method for Dirt in Paper and Paperboard
D2020-92(2003) - Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
D2022-89(2008) - Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
D2023-89(2003) - Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
D2024-09 - Standard Test Method for Cloud Point of Nonionic Surfactants
D2043-94(2007) - Standard Test Method for Silver Tarnishing by Paper
D2047-04 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
D2048-92(2008) - Standard Test Method for Powdering of Floor Polish Films
D2063/D2063M-09 - Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
D2093-03 - Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
D2094-00(2006) - Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
D2095-96(2008) - Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
D2096-00(2005)e1 - Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
D2097-03(2005) - Standard Test Method for Flex Testing of Finish on Upholstery Leather
D2098-04(2008) - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
D2099-05 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
D2106-07e1 - Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
D2108-05 - Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
D2109-01(2006)e1 - Standard Test Methods for Nonvolatile Matter in Halogenated Organic
Solvents and Their Admixtures
D2110-00(2006) - Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
D2111-02(2007) - Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
D2175-97(2007) - Standard Test Method for Book Bulk and Book Bulking Number of Paper
D2176-97a(2007) - Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
D2177-99(2003) - Standard Test Method for Ink Absorption of Blotting Paper
D2180-89(2008) - Standard Test Method for Active Oxygen in Bleaching Compounds
D2207-00(2005) - Standard Test Method for Bursting Strength of Leather by the Ball Method
D2208-00(2005) - Standard Test Method for Breaking Strength of Leather by the Grab Method
D2209-00(2004) - Standard Test Method for Tensile Strength of Leather
D2210-00(2008) - Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
D2211-00(2005) - Standard Test Method for Elongation of Leather
D2212-00(2005) - Standard Test Method for Slit Tear Resistance of Leather
D2213-00(2005) - Standard Test Method for Compressibility of Leather
D2221-01 - Standard Test Method for Creep Properties of Package Cushioning Materials
D2251-96(2004) - Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
D2281-68(2005) - Standard Test Method for Evaluation of Wetting Agents by the Skein Test
D2293-96(2008) - Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
D2294-96(2008) - Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
D2295-96(2008) - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
D2322-00(2005) - Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
D2339-98(2004) - Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
D2344/D2344M-00(2006) - Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D2346-00(2008) - Standard Test Method for Apparent Density of Leather
D2347-00(2005) - Standard Test Method for Measuring Area of Leather Test Specimens
D2357-74(2003) - Standard for Qualitative Classification of Surfactants by Infrared Absorption
D2358-89(2003) - Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
D2442-75(2007) - Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
D2482-97(2007) - Standard Test Method for Surface Strength of Paper (Wax Pick Method)
D2556-93a(2005) - Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
D2557-98(2004) - Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)
D2559-04 - Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
D2570-08 - Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
D2617-06 - Standard Test Method for Total Ash in Leather
D2651-01(2008) - Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
D2652-05a - Standard Terminology Relating to Activated Carbon
D2658-04(2009) - Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
D2674-72(2004)e1 - Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
D2739-97(2004) - Standard Test Method for Volume Resistivity of Conductive Adhesives
D2758-94(2003) - Standard Test Method for Engine Coolants by Engine Dynamometer
D2807-93(2009) - Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
D2809-04e2 - Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
D2810-07 - Standard Test Method for pH of Leather
D2813-03(2008) - Standard Practice for Sampling Leather for Physical and Chemical Tests
D2821-00(2005)e1 - Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
D2825-02(2008) - Standard Terminology Relating to Polishes and Related Materials
D2834-95(2008) - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
D2847-07 - Standard Practice for Testing Engine Coolants in Car and Light Truck Service
D2851-98(2009) - Standard Specification for Liquid Optical Adhesive
D2854-09 - Standard Test Method for Apparent Density of Activated Carbon
D2860/D2860M-04 - Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
D2862-97(2009)e1 - Standard Test Method for Particle Size Distribution of Granular Activated Carbon
D2866-94(2004) - Standard Test Method for Total Ash Content of Activated Carbon
D2867-04 - Standard Test Methods for Moisture in Activated Carbon
D2868-07 - Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
D2875-00(2005) - Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
D2876-00(2005) - Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
D2918-99(2005) - Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
D2919-01(2007) - Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
D2941-00(2008) - Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
D2942-02(2008) - Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
D2943-02(2007) - Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
D2959-95(2003) - Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
D2960-05 - Standard Test Method of Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances
D2979-01(2009) - Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
D2988-96(2005) - Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
D2989-01(2006) - Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
D3039/D3039M-08 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
D3048-89(2003) - Standard Test Method of Assay for Alkaline Protease
D3049-89(2003) - Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
D3050-07 - Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
D3052-87(2003) - Standard Practice for Rating Water-Emulsion Floor Polishes
D3060-94(2005) - Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
D3061-97(2008) - Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
D3064-97(2008) - Terminology Relating to Aerosol Products
D3065-01(2006) - Standard Test Methods for Flammability of Aerosol Products
D3069-94(2005) - Standard Test Method for Delivery Rate of Aerosol Products
D3070-00(2005) - Standard Test Method of Rapid Pressure Determination of Pressurized Products
D3076-00(2005) - Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
D3078-02(2008) - Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
D3079-94(2009)e1 - Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
D3089-97(2008) - Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
D3090-72(2008) - Standard Practice for Storage Testing of Aerosol Products
D3091-72(2008) - Standard Practice for Safe Filling of Low-Pressure Pressurized Products
D3094-00(2005) - Standard Test Method for Seepage Rate of Aerosol Products
D3103-07e1 - Standard Test Method for Thermal Insulation Performance of Distribution Packages
D3111-99(2004)e1 - Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
D3121-06 - Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
D3147-06 - Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
D3153-87(2008) - Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
D3163-01(2008) - Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
D3164-03 - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D3164M-03 - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D3165-07 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D3166-99(2005) - Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
D3167-03a(2004) - Standard Test Method for Floating Roller Peel Resistance of Adhesives
D3171-09 - Standard Test Methods for Constituent Content of Composite Materials
D3198-97(2007) - Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
D3206-08 - Standard Test Method for Soil Resistance of Floor Polishes
D3207-92(2008) - Standard Test Method for Detergent Resistance of Floor Polish Films
D3208-00(2005) - Standard Specification for Manifold Papers for Permanent Records
D3209-93(2008) - Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
D3210-95(2008) - Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
D3285-93(2005) - Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
D3290-00(2005) - Standard Specification for Bond and Ledger Papers for Permanent Records
D3301-00(2005) - Standard Specification for File Folders for Storage of Permanent Records
D3306-09 - Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D3310-00(2006) - Standard Test Method for Determining Corrosivity of Adhesive Materials
D3316-06 - Standard Test Method for Stability of Perchloroethylene with Copper
D3321-94(2007) - Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
D3330/D3330M-04 - Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
D3332-99(2004) - Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
D3401-97(2006) - Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
D3410/D3410M-03(2008) - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3430-95(2008) - Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
D3433-99(2005) - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
D3434-00(2006) - Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
D3440-01(2007) - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
D3443-00(2005) - Standard Test Method for Chloride in Trichlorotrifluoroethane
D3444-00(2005) - Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
D3448-85(2005) - Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
D3458-00(2005) - Standard Specification for Copies from Office Copying Machines for Permanent Records
D3460-07 - Standard Specification for White Watermarked and Unwatermarked Bond, Reprographic, and Laser Printer Cut-Sized Office Papers
D3466-06 - Standard Test Method for Ignition Temperature of Granular Activated Carbon
D3467-04(2009) - Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3469-97(2007) - Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
D3470-97(2007) - Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
D3472-97(2007) - Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
D3474-90(2007) - Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
D3475-09 - Standard Classification of Child-Resistant Packages
D3479/D3479M-96(2007) - Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D3481-06 - Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D3482-07a - Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
D3495-00(2006) - Standard Test Method for Hexane Extraction of Leather
D3498-03 - Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
D3518/D3518M-94(2007) - Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
D3528-96(2008) - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D3529/D3529M-97(2008) - Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
D3530/D3530M-97(2008) - Standard Test Method for Volatiles Content of Composite Material Prepreg
D3531-99(2004) - Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
D3532-99(2004) - Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D3535-07a - Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
D3543-93(2008) - Standard Test Method for Metal Glide Adhesion
D3552-96(2007) - Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
D3556-85(2001) - Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
D3564-95(2008) - Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
D3580-95(2004) - Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
D3585-08 - Standard Specification for ASTM Reference Fluid for Coolant Tests
D3598-89(2003) - Standard Test Method for Citrate in Synthetic Detergents
D3611-06 - Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
D3632-98(2004) - Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
D3634-99(2005)e1 - Standard Test Method for Trace Chloride Ion in Engine Coolants
D3642-98(2004) - Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
D3643-98(2004) - Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
D3644-06 - Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
D3652/D3652M-01(2006) - Standard Test Method for Thickness of Pressure-Sensitive Tapes
D3654/D3654M-06 - Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
D3658-01(2008) - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
D3673-89(2003) - Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
D3698-04 - Standard Practice for Solvent Vapor Degreasing Operations
D3715/D3715M-98(2004) - Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
D3716-99(2008) - Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
D3741-00(2004) - Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
D3751-94(2008) - Standard Practice for Evaluation of Furniture Polish
D3757-89(2005)e1 - Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
D3758-95(2003) - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
D3759/D3759M-05 - Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
D3762-03 - Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D3790-79(2006) - Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
D3800-99(2004) - Standard Test Method for Density of High-Modulus Fibers
D3802-79(2005) - Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3803-91(2009) - Standard Test Method for Nuclear-Grade Activated Carbon
D3807-98(2004) - Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
D3808-01(2007) - Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
D3810-97(2007) - Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
D3811/D3811M-96(2006) - Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
D3813/D3813M-98(2007) - Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
D3815/D3815M-05 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
D3816/D3816M-96(2007) - Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
D3833/D3833M-96(2006) - Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
D3836-94(2007) - Standard Practice for Evaluation of Automotive Polish
D3837-95(2007) - Standard Practice for Preparing a Solution of Alkali-Soluble Resins
D3838-05 - Standard Test Method for pH of Activated Carbon
D3844-02(2008) - Standard Guide for Labeling Chlorinated Hydrocarbon Solvent Containers
D3860-98(2008) - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D3878-07 - Standard Terminology for Composite Materials
D3889/D3889M-96(2006) - Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
D3890-05 - Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
D3897-91(2006) - Standard Practice for Calculation of Basicity of Chrome Tanning Liquors
D3898-93(2009) - Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
D3913-03(2009) - Standard Test Method for Acidity in Basic Chromium Tanning Liquors
D3929-03 - Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
D3930-08 - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
D3931-08 - Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
D3933-98(2004) - Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D3950-09a - Standard Specification for Strapping, Nonmetallic (and Joining Methods)
D3951-98(2004) - Standard Practice for Commercial Packaging
D3953-07a - Standard Specification for Strapping, Flat Steel and Seals
D3954-94(2004) - Standard Test Method for Dropping Point of Waxes
D3968-97(2007) - Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
D3983-98(2004) - Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
D3985-05 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
D4002-81(2008) - Standard Practice for Evaluation of Buffable Shoe Polish
D4003-98(2009) - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
D4008-95(2003) - Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)
D4009-92(2006) - Standard Guide for Foam Stability of Hand Dishwashing Detergents
D4018-99(2008) - Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
D4027-98(2004) - Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
D4041-05 - Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
D4069-95(2008) - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4078-02(2008) - Standard Specification for Water Emulsion Floor Polish
D4079-00(2006) - Standard Specification for Vapor-Degreasing Grade Methylene Chloride
D4080-00(2006) - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
D4081-00(2006) - Standard Specification for Drycleaning-Grade Perchloroethylene
D4095-97(2008) - Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
D4102-82(2008) - Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
D4103-90(2009) - Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
D4126-02(2007) - Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
D4168-95(2008)e1 - Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
D4169-09 - Standard Practice for Performance Testing of Shipping Containers and Systems
D4250-92(2003) - Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products
D4251-89(2003) - Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
D4252-89(2003) - Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
D4255/D4255M-01(2007) - Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
D4265-98(2007)e1 - Standard Guide for Evaluating Stain Removal Performance in Home Laundering
D4267-07 - Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
D4276-02(2007) - Standard Practice for Confined Area Entry
D4279-95(2009) - Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
D4283-98(2004) - Standard Test Method for Viscosity of Silicone Fluids
D4300-01(2008) - Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
D4317-98(2004) - Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
D4330-94(2008) - Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
D4332-01(2006) - Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
D4333-05 - Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components
D4334-05 - Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
D4335-99(2006) - Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
D4336-05 - Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
D4337-89(2003) - Standard Test Methods for Analysis of Linear Detergent Alkylates
D4338-97(2004) - Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
D4339-01(2007) - Standard Test Method for Determination of the Odor of Adhesives
D4340-96(2007) - Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D4376-02(2007) - Standard Specification for Vapor-Degreasing Grade Perchloroethylene
D4386-95(2008) - Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
D4426-01(2006) - Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
D4488-95(2001)e1 - Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls
D4494-95(2004) - Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
D4497-94(2004)e1 - Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
D4498-07 - Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
D4499-07 - Standard Test Method for Heat Stability of Hot-Melt Adhesives
D4501-01(2009)e1 - Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
D4502-92(2004) - Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
D4504-94(2005) - Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
D4562-01(2007) - Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
D4576-08 - Standard Test Method for Mold Growth Resistance of Wet Blue
D4577-05 - Standard Test Method for Compression Resistance of a Container Under Constant Load
D4579-00(2006) - Standard Practice for Handling an Acid Degreaser or Still
D4607-94(2006) - Standard Test Method for Determination of Iodine Number of Activated Carbon
D4608-89(2003) - Standard Test Method for Citrate in Detergents
D4649-03(2009) - Standard Guide for Selection and Use of Stretch Wrap Films
D4653-87(2009) - Standard Test Method for Total Chlorides in Leather
D4654-87(2009) - Standard Test Method for Sulfate Basicity in Leather
D4655-95(2006) - Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
D4675-09 - Standard Guide for Selection and Use of Flat Strapping Materials
D4680-98(2004) - Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
D4688-99(2005) - Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
D4689-99(2005) - Standard Specification for Adhesive, Casein-Type
D4690-99(2005) - Standard Specification for Urea-Formaldehyde Resin Adhesives
D4701-00(2006) - Standard Specification for Technical Grade Methylene Chloride
D4704-00(2005) - Standard Test Method for Tearing Strength, Tongue Tear of Leather
D4705-00(2005) - Standard Test Method for Stitch Tear Strength of Leather, Double Hole
D4711-89(2003) - Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
D4714-96(2007) - Standard Test Method for Determination of Effect of Moist Heat (50 % Relative Humidity and 90C) on Properties of Paper and Board
D4725-08a - Standard Terminology for Engine Coolants
D4727/D4727M-07 - Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
D4728-06 - Standard Test Method for Random Vibration Testing of Shipping Containers
D4755-95(2004) - Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
D4759-02(2007) - Standard Practice for Determining the Specification Conformance of Geosynthetics
D4762-08 - Standard Guide for Testing Polymer Matrix Composite Materials
D4774-06 - Standard Specification for User Applied Drug Labels in Anesthesiology
D4775/D4775M-09 - Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
D4783-01(2008) - Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
D4786-00(2005) - Standard Test Method for Stitch Tear Strength, Single Hole
D4800-94(2005) - Standard Guide for Classifying and Specifying Adhesives
D4825-97(2007) - Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
D4826-88(2007) - Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
D4831-00(2005) - Standard Test Method for Buckle Tear Strength of Leather
D4896-01(2008)e1 - Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
D4899-99(2009) - Standard Practice for Analysis of Vegetable Tanning Materials-General
D4900-99(2009) - Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
D4901-99(2009) - Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
D4902-99(2009) - Standard Test Method for Evaporation and Drying of Analytical Solutions
D4903-99(2009) - Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
D4904-99(2009) - Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
D4905-99(2009) - Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
D4906-95(2006) - Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
D4907-00(2005) - Standard Test Method for Nitrocellulose in Finish on Leather
D4917-97(2007)e1 - Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
D4918-97(2007) - Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
D4919-03(2008) - Standard Specification for Testing of Hazardous Materials Packagings
D4921-95(2006) - Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
D4949-94(2002) - Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
D4954-89(2003) - Standard Test Method for Determination of Nitrilotriacetates in Detergents
D4955-89(2008) - Standard Practice for Field Evaluation of Automotive Polish
D4985-09 - Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
D4987-99(2008) - Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
D4988-96(2006) - Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
D4991-07 - Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
D4995-04 - Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent
D5022-07 - Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
D5029-98(2009) - Standard Test Method for Water Solubles in Activated Carbon
D5040-90(2005) - Standard Test Methods for Ash Content of Adhesives
D5041-98(2004) - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
D5052-00(2005) - Standard Test Method for Permeability of Leather to Water Vapor
D5053-03e1 - Standard Test Method for Colorfastness of Crocking of Leather
D5070-90(2005) - Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
D5077-90(2009) - Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
D5094/D5094M-09 - Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
D5105-05 - Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
D5112-98(2009) - Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
D5113-97(2005) - Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
D5118/D5118M-05ae1 - Standard Practice for Fabrication of Fiberboard Shipping Boxes
D5158-98(2005) - Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
D5159-04 - Standard Guide for Dusting Attrition of Granular Activated Carbon
D5160-95(2008) - Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
D5168-09 - Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
D5215-93(2005) - Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
D5228-92(2005) - Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
D5229/D5229M-92(2004) - Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D5237-05 - Standard Guide for Evaluating Fabric Softeners
D5248-04 - Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
D5264-98(2004) - Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
D5265-03(2009) - Standard Test Method for Bridge Impact Testing
D5266-99(2005) - Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
D5267-97(2005) - Standard Test Method for Determination of Extrudability of Cartridge Adhesives
D5276-98(2009) - Standard Test Method for Drop Test of Loaded Containers by Free Fall
D5277-92(2008) - Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
D5330/D5330M-06 - Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
D5331-03(2009)e1 - Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
D5342-97(2007) - Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
D5343-06 - Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
D5346-93(2009) - Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
D5347-95(2006) - Standard Test Method for Determination of the Ash Content of Fats and Oils
D5348-95(2006) - Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
D5349-95(2006) - Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
D5350-95(2006) - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
D5351-93(2009) - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
D5352-95(2006) - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
D5353-95(2006) - Standard Test Method for Determination of Total Desulfated Fatty Matter
D5354-95(2006) - Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
D5355-95(2006) - Standard Test Method for Specific Gravity of Oils and Liquid Fats
D5356-93(2009) - Standard Test Method for PH of Chrome Tanning Solutions
D5363-03(2008) - Standard Specification for Anaerobic Single-Component Adhesives (AN)
D5375/D5375M-98(2004) - Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
D5379/D5379M-05 - Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
D5394-02(2007) - Standard Specification for Reclaimed 1,1,1-Trichloroethane
D5395-03(2008) - Standard Specification for Reclaimed Methylene Chloride
D5396-04 - Standard Specification for Reclaimed Perchloroethylene
D5414-95(2007) - Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
D5415-95(2007) - Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
D5416-95(2007) - Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
D5439-95(2006) - Standard Test Method for Determination of Sediment in Moellon
D5440-93(2009) - Standard Test Method for Determining the Melting Point of Fats and Oils
D5445-05 - Standard Practice for Pictorial Markings for Handling of Goods
D5448/D5448M-93(2006) - Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5449/D5449M-93(2006) - Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5450/D5450M-93(2006) - Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5455-93(2003) - Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
D5458-95(2007) - Standard Test Method for Peel Cling of Stretch Wrap Film
D5459-95(2007) - Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
D5467/D5467M-97(2004) - Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
D5486/D5486M-06 - Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
D5487-98(2008) - Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
D5528-01(2007)e3 - Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D5547-95(2003) - Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
D5548-05e1 - Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
D5551-95(2006) - Standard Test Method for Determination of the Cloud Point of Oil
D5552-00(2005) - Standard Test Method for Resistance of Colored Leather to Bleeding
D5553-95(2006) - Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
D5554-95(2006) - Standard Test Method for Determination of the Iodine Value of Fats and Oils
D5555-95(2006) - Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5556-95(2006) - Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds
D5557-95(2006) - Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5558-95(2006) - Standard Test Method for Determination of the Saponification Value of Fats and Oils
D5559-95(2006) - Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
D5560-95(2006) - Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
D5562-95(2006) - Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
D5564-95(2006) - Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
D5565-95(2006) - Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
D5566-95(2006) - Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils
D5570-94(2005) - Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
D5571-94(2005) - Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
D5572-95(2005) - Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
D5573-99(2005) - Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
D5574-94(2005) - Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
D5616-04 - Standard Specification for Reclaimed Trichloroethylene
D5626-94(2006) - Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas
D5631-08 - Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF₃BR)
D5632-08 - Standard Specification for Halon 1301, Bromotrifluoromethane (CF₃Br)
D5634-01(2006) - Standard Guide for Selection of Permanent and Durable Offset and Book Papers
D5639/D5639M-09 - Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
D5648-01(2008) - Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
D5649-01(2008) - Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
D5650-97(2007) - Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration)
D5656-04e1 - Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
D5657-07 - Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
D5663-97(2003) - Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
D5678-95(2008) - Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
D5687/D5687M-95(2007) - Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
D5725-99(2008) - Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
D5728-00(2006) - Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
D5742-95(2005) - Standard Test Method for Determination of Butane Activity of Activated Carbon
D5748-95(2007) - Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
D5749-01(2006) - Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
D5750/D5750M-95(2006) - Standard Guide for Width and Length of Pressure-Sensitive Tape
D5751-99(2005) - Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
D5752-05 - Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
D5766/D5766M-07 - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
D5802-95(2001) - Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
D5806-95(2003) - Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
D5824-98(2003) - Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
D5827-09e1 - Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
D5828-97(2002) - Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
D5832-98(2008) - Standard Test Method for Volatile Matter Content of Activated Carbon Samples
D5868-01(2008) - Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
D5919-96(2006) - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D5931-96(2007) - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
D5960-03(2008) - Standard Specification for Technical Grade Ethylene Dichloride
D5961/D5961M-08 - Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
D6004-04 - Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
D6005-03(2009) - Standard Test Method for Determining Slump Resistance of Carpet Adhesives
D6012-03(2008) - Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
D6013-00(2005) - Standard Test Method for Determination of Area Stability of Leather to Laundering
D6014-00(2005) - Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
D6015-00(2005) - Standard Test Method for Static Water Absorption of Leather
D6016-06 - Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
D6017-97(2009) - Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
D6018-96(2006) - Standard Test Method for Determining the Presence of Lead Salts in Leather
D6019-96(2006) - Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
D6020-00(2005) - Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
D6039/D6039M-08 - Standard Specification for Open and Covered Wood Crates
D6043-01(2006) - Standard Guide for Selection of Permanent and Durable Artist's Paper
D6055-96(2007)e1 - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
D6064-03 - Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF₃CHFCF₃)
D6065-05 - Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
D6075-00(2005) - Standard Test Method for Cracking Resistance of Leather
D6076-08 - Standard Test Method for Shrinkage Temperature of Leather
D6077-00(2005) - Standard Test Method for Trapezoid Tearing Strength of Leather
D6101-97(2005) - Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis
D6105-04 - Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
D6107-97(2007) - Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
D6115-97(2004) - Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D6116-00(2005) - Standard Test Method for Blocking
D6123/D6123M-97(2007) - Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
D6125-97(2007) - Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
D6126-97(2003)e1 - Standard Specification for HFC-23 (Trifluoromethane, CHF₃)
D6127-03 - Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF₃)
D6129-97(2007) - Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
D6130-97a(2003) - Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D6148-97(2007) - Standard Practice for Separation and Examination of Stickies
D6173-97(2005) - Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
D6174-01(2006) - Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
D6179-07 - Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
D6182-00(2005) - Standard Test Method for Flexibility and Adhesion of Finish on Leather
D6183-00(2005) - Standard Test Method for Tackiness of Finish on Leather
D6195-03e1 - Standard Test Methods for Loop Tack
D6198-07 - Standard Guide for Transport Packaging Design
D6199-07 - Standard Practice for Quality of Wood Members of Containers and Pallets
D6205-06 - Standard Practice for Calibration of the James Static Coefficient of Friction Machine
D6208-07 - Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
D6210-08 - Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
D6231-98(2003) - Standard Specification for HFC-125 (Pentafluoroethane, C₂HF₅)
D6251/D6251M-07e2 - Standard Specification for Wood-Cleated Panelboard Shipping Boxes
D6252/D6252M-98(2004) - Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
D6253-05a - Standard Practice for Treatment and/or Marking of Wood Packaging Materials
D6254/D6254M-07 - Standard Specification for Wirebound Pallet-Type Wood Boxes
D6255/D6255M-05 - Standard Specification for Steel or Aluminum Slotted Angle Crates
D6256/D6256M-99(2005) - Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases
D6264/D6264M-07 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
D6268-09 - Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C₂HF₅)
D6295/D6295M-98(2004) - Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
D6325-98(2004) - Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
D6334-07 - Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
D6344-04(2009) - Standard Test Method for Concentrated Impacts to Transport Packages
D6361-98(2004)e1 - Standard Guide for Selecting Cleaning Agents and Processes
D6368-06 - Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide
D6385-99(2006) - Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
D6396-99(2005) - Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
D6398-08 - Standard Practice to Enhance Identification of Drug Names on Labels
D6401-99(2009) - Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
D6402-99(2009) - Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
D6403-99(2009) - Standard Test Method for Determining Moisture in Raw and Spent Materials
D6404-99(2009) - Standard Practice for Sampling Vegetable Materials Containing Tannin
D6405-99(2009) - Standard Practice for Extraction of Tannins from Raw and Spent Materials
D6406-99(2009) - Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
D6407-99(2009) - Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
D6408-99(2009) - Standard Test Method for Analysis of Tannery Liquors
D6409-99(2009) - Standard Practice for Color Tests with Sheepskin Skiver
D6410-99(2009) - Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
D6411/D6411M-99(2005) - Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
D6412/D6412M-99(2005) - Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
D6415/D6415M-06ae1 - Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
D6416/D6416M-01(2007) - Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
D6427-99(2004) - Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF₃CH₂CF₃)
D6463/D6463M-06 - Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
D6464-03ae1 - Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
D6465-99(2005) - Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
D6471-06 - Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
D6472-06 - Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
D6484/D6484M-04e1 - Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
D6505-00(2006) - Standard Test Method for Assay of normal-Propyl Bromide Content
D6507-00(2005) - Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
D6534-05 - Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
D6535-05 - Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
D6536-00(2005) - Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
D6537-00(2006) - Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
D6541-05 - Standard Specification for HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane, (CF3CH 2CF3)
D6548-00(2005) - Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure)
D6551/D6551M-05 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
D6573/D6573M-01(2007) - Standard Specification for General Purpose Wirebound Shipping Boxes
D6586-03(2008) - Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
D6590/D6590M-00(2006) - Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
D6625-01(2007) - Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
D6633-05 - Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
D6641/D6641M-09 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
D6646-03(2008) - Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
D6647-01(2006) - Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
D6653-01(2006) - Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
D6654-05 - Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
D6655-01(2007) - Standard Terminology Relating to Mechanical Pump Dispensers
D6656-01(2006) - Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
D6657-08 - Standard Test Method for pH of Wet Blue
D6658-08 - Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
D6659-08 - Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests
D6660-01(2007) - Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
D6671/D6671M-06 - Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
D6714-01(2006) - Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
D6715-08 - Standard Practice for Sampling and Preparation of Salt Preserved (Cured) Hides and Skins for Chemical and Physical Tests
D6716-08 - Standard Test Method for Total Ash in Wet Blue
D6742/D6742M-07 - Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
D6772-02(2007) - Standard Test Method for Dimensional Stability of Sandwich Core Materials
D6781-02(2007) - Standard Guide for Carbon Reactivation
D6787-02(2007) - Standard Specification for Repositionable Note Pad
D6788-02(2007) - Standard Specification for Repositionable Pressure-Sensitive Flags
D6789-02(2007) - Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
D6790-02(2007) - Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
D6804-02(2007) - Standard Guide for Hand Hole Design in Corrugated Boxes
D6806-02(2007)e1 - Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
D6819-02(2007) - Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
D6827-02(2008) - Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
D6833-02(2007) - Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus
D6834-02(2008) - Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
D6851-02(2007)e1 - Standard Test Method for Determination of Contact pH with Activated Carbon
D6856-03(2008) - Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
D6862-04 - Standard Test Method for 90 Degree Peel Resistance of Adhesives
D6873/D6873M-08 - Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
D6880-05 - Standard Specification for Wood Boxes
D6881/D6881M-03(2008)e1 - Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
D6920-07 - Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
D7028-07e1 - Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
D7030-04(2009) - Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
D7077-04 - Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
D7078/D7078M-05 - Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
D7122-05 - Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)
D7123-04 - Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)
D7136/D7136M-07 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
D7137/D7137M-07 - Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
D7149-05 - Standard Practice for Determining the Freeze Thaw Stability of Adhesives
D7205/D7205M-06 - Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
D7225-06 - Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
D7247-07ae1 - Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
D7248/D7248M-08 - Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
D7249/D7249M-06 - Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
D7250/D7250M-06 - Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
D7255-06e1 - Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method)
D7257-06 - Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D7264/D7264M-07 - Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
D7290-06 - Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
D7291/D7291M-07 - Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
D7298-06 - Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
D7304-06 - Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
D7323-07 - Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
D7324-07 - Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2
D7325-07 - Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2
D7326-06e1 - Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH₂FCF ₃, CHF₂ CF₃, and CO₂)
D7327-07 - Standard Specification for HFC Blend B (CH₂FCF₃, CHF₂CF₃, and CO₂)
D7332/D7332M-09 - Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
D7336/D7336M-07 - Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
D7337/D7337M-07 - Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
D7340-07 - Standard Practice for Thermal Conductivity of Leather
D7385-07 - Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
D7386-08 - Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
D7387-07 - Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
D7388-08 - Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
D7389-07 - Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
D7434-08 - Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
D7435-08 - Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
D7437-08 - Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
D7446-09 - Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
D7447-08e1 - Standard Practice for Symbolizing Adhesive Applications
D7476-08 - Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
D7477-08 - Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
D7478/D7478M-08e1 - Standard Specification for Heavy Duty Sheathed Wood Crates
D7509-09 - Standard Specification for Fluorocarbon Feedstock Grade Chloroform
D7515-09 - Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
D7517-09 - Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
D7518-09 - Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
D7522/D7522M-09 - Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
D7532-09 - Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
D7580/D7580M-09 - Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads
E70-07 - Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
E171-94(2007) - Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
E180-03 - Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
E200-08 - Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
E202-05 - Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
E203-08 - Standard Test Method for Water Using Volumetric Karl Fischer Titration
E222-00(2005)e1 - Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
E223-08 - Standard Test Methods for Analysis of Sulfuric Acid
E224-08 - Standard Test Methods for Analysis of Hydrochloric Acid
E253-09 - Standard Terminology Relating to Sensory Evaluation of Materials and Products
E256-09 - Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
E258-07 - Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
E285-08 - Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
E291-09 - Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
E295-82(2006) - Standard Test Method for Measured Speed of Oil Diffusion Pumps
E296-70(2004) - Standard Practice for Ionization Gage Application to Space Simulators
E298-08 - Standard Test Methods for Assay of Organic Peroxides
E299-08 - Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
E300-03 - Standard Practice for Sampling Industrial Chemicals
E307-72(2008) - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
E341-08 - Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
E346-08 - Standard Test Method for Analysis of Methanol
E349-06 - Standard Terminology Relating to Space Simulation
E359-00(2005)e1 - Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
E377-08 - Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
E394-09 - Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
E398-03(2009)e1 - Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
E408-71(2008) - Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E410-08 - Standard Test Method for Moisture and Residue in Liquid Chlorine
E411-05 - Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
E422-05 - Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
E423-71(2008) - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
E434-71(2002) - Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
E449-08 - Standard Test Methods for Analysis of Calcium Chloride
E457-08 - Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E458-08 - Standard Test Method for Heat of Ablation
E459-05 - Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E460-04 - Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
E471-96(2002) - Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
E475-00(2005) - Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
E490-00a(2006) - Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
E491-73(2004)e1 - Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E506-08 - Standard Test Method for Mercury in Liquid Chlorine
E511-07 - Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
E512-94(2004) - Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
E534-08 - Standard Test Methods for Chemical Analysis of Sodium Chloride
E538-98(2008) - Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
E544-99(2004) - Standard Practices for Referencing Suprathreshold Odor Intensity
E595-07 - Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E598-08 - Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
E611-08 - Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
E619-09 - Standard Practice for Evaluating Foreign Odors in Paper Packaging
E637-05 - Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
E639-78(2002) - Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
E649-00(2005)e1 - Standard Test Method for Bromine in Chlorine
E675-02(2007) - Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
E679-04 - Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
E755-08 - Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)
E769-85(2004) - Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
E806-08 - Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
E834-04 - Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
E1064-08 - Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
E1075-85(2004) - Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
E1083-00(2006) - Standard Test Method for Sensory Evaluation of Red Pepper Heat
E1090-08 - Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
E1119-09 - Standard Specification for Industrial Grade Ethylene Glycol
E1120-08 - Standard Specification for Liquid Chlorine
E1146-08 - Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
E1177-06 - Standard Specification for Engine Coolant Grade Ethylene Glycol
E1178-08 - Standard Test Methods for Analysis of Acrylonitrile
E1207-09 - Standard Practice for The Sensory Evaluation of Axillary Deodorancy
E1216-06 - Standard Practice for Sampling for Particulate Contamination by Tape Lift
E1228-09 - Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
E1229-08 - Standard Specification for Calcium Hypochlorite
E1234-07 - Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
E1235-08 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
E1293-02(2007) - Standard Specification for Glass Measuring Pipets
E1309-00(2005) - Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
E1346-90(2006) - Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation
E1395-90(2004) - Standard Test Method for Sensory Evaluation of Low Heat Chilies
E1396-90(2004) - Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
E1432-04 - Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
E1434-00(2006) - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
E1456-08 - Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
E1471-92(2008) - Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
E1490-03 - Standard Practice for Descriptive Skinfeel Analysis of Creams and Lotions
E1506-08 - Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)
E1547-09 - Standard Terminology Relating to Industrial and Specialty Chemicals
E1548-09 - Standard Practice for Preparation of Aerospace Contamination Control Plans
E1549-06 - Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
E1559-09 - Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
E1560-06 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1584-00(2005)e1 - Standard Test Method for Assay of Nitric Acid
E1593-06 - Standard Guide for Assessing the Efficacy of Air Care Products in Reducing Sensorly Perceived Indoor Air Malodor Intensity
E1615-08 - Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
E1616-08 - Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
E1627-94(2004) - Standard Practice for Sensory Evaluation of Edible Oils and Fats
E1697-05 - Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
E1731-06 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
E1746-08 - Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
E1754-08 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
E1784-08 - Standard Test Method for Total Peroxides in Acrylonitrile
E1786-08 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
E1787-08 - Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
E1788-08 - Standard Test Method for Acidity in Acrylonitrile
E1810-96(2004) - Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
E1863-07 - Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
E1870-04 - Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
E1871-06 - Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages
E1879-00(2004)e1 - Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
E1885-04 - Standard Test Method for Sensory Analysis—Triangle Test
E1899-08 - Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
E1909-97(2003) - Standard Guide for Time-Intensity Evaluation of Sensory Attributes
E1958-07e1 - Standard Guide for Sensory Claim Substantiation
E1997-07 - Standard Practice for the Selection of Spacecraft Materials
E2036-07 - Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2037-07 - Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2042/E2042M-09 - Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E2049-06 - Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners by Trained Assessors
E2082-06 - Standard Guide for Descriptive Analysis of Shampoo Performance
E2088-06 - Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
E2089-00(2006) - Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
E2090-06 - Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
E2139-05 - Standard Test Method for Same-Different Test
E2164-08 - Standard Test Method for Directional Difference Test
E2193-08 - Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
E2217-02(2007) - Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
E2262-03 - Standard Practice for Estimating Thurstonian Discriminal Distances
E2263-04 - Standard Test Method for Paired Preference Test
E2299-03 - Standard Guide for Sensory Evaluation of Products by Children
E2311-04 - Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2312-04 - Standard Practice for Tests of Cleanroom Materials
E2313-08 - Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
E2346-09 - Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
E2352-04 - Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
E2409-08 - Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)
E2454-05 - Standard Guide for Sensory Evaluation Methods to Determine the Sensory Shelf Life of Consumer Products
E2469-08a - Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
E2470-07 - Standard Specification for Polyester Grade Ethylene Glycol
E2609-08 - Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
E2610-08 - Standard Test Method for Sensory Analysis—Duo-Trio Test
E2664-09 - Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
E2679-09 - Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by
Non-Aqueous Potentiometric Titration
E2680-09 - Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
E2683-09 - Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
E2684-09 - Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
F14-80(2005) - Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
F17-08 - Standard Terminology Relating to Flexible Barrier Packaging
F21-65(2007) - Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
F22-02(2007) - Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
F24-09 - Standard Method for Measuring and Counting Particulate Contamination on Surfaces
F25/F25M-09 - Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F34-02(2007) - Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F50-07 - Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F51-00(2007) - Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F79-69(2005) - Standard Specification for Type 101 Sealing Glass
F88/F88M-09 - Standard Test Method for Seal Strength of Flexible Barrier Materials
F91-06 - Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
F92-93(2008) - Standard Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons
F99-07 - Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
F105-72(2005) - Standard Specification for Type 58 Borosilicate Sealing Glass
F109-04(2009) - Standard Terminology Relating to Surface Imperfections on Ceramics
F119-82(2008) - Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
F129-97(2008) - Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
F137-08 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
F140-98(2008) - Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
F141-08a - Standard Terminology Relating to Resilient Floor Coverings
F144-80(2005) - Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
F149-92b(2009) - Standard Terminology Relating to Optical Character Recognition
F150-06 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
F153-95(2008) - Standard Test Method for Determining the Yield of Wide Inked Computer Ribbons
F218-05 - Standard Test Method for Analyzing Stress in Glass
F221-98(2009) - Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
F302-04 - Standard Practice for Field Sampling of Aerospace Fluids in Containers
F303-08 - Standard Practices for Sampling for Particles in Aerospace Fluids and Components
F307-02(2007) - Standard Practice for Sampling Pressurized Gas for Gas Analysis
F309-04 - Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F310-07 - Standard Practice for Sampling Cryogenic Aerospace Fluids
F311-08 - Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F312-08 - Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F318-06 - Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
F319-09 - Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F320-05 - Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F326-96(2006) - Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F327-08 - Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F330-89(2004) - Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
F331-05 - Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F335-03(2009) - Standard Terminology Relating to Electrostatic Copying
F355-01 - Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
F360-82(2006) - Standard Practice for Image Evaluation of Electrostatic Business Copies
F362-91(2005) - Standard Test Method for Determining the Erasability of Inked Ribbons
F373-06 - Standard Test Method for Embossed Depth of Resilient Floor Coverings
F381-09 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
F386-02(2008) - Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
F387-02(2008) - Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
F392-93(2004) - Standard Test Method for Flex Durability of Flexible Barrier Materials
F395-03(2007) - Standard Terminology Relating to Vacuum Cleaners
F396-00(2009) - Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
F400-04 - Standard Consumer Safety Specification for Lighters
F404-08 - Standard Consumer Safety Specification for High Chairs
F406-09 - Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
F410-08 - Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
F415-87(2005) - Standard Test Method for Curl in Carbon Paper
F420-04(2009) - Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
F428-09 - Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F429-01(2007) - Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
F430-05 - Standard Test Methods for Paper Used for Vacuum Cleaner Filter Bags
F431-04(2008) - Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
F444-88(2009) - Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
F445-88(2009) - Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
F446-85(2009) - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
F450-09 - Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
F462-79(2007) - Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
F470-89(2009) - Standard Practice for Caking Temperature of Dry Electrostatic Toner
F471-76(2002) - Standard Terminology Relating to Combination Locks
F472-92(2006) - Standard Terminology for Geometry of Alpine Skis
F473-09 - Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
F476-84(2002) - Standard Test Methods for Security of Swinging Door Assemblies
F482-09 - Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
F483-09 - Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
F484-08 - Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
F485-08 - Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
F486-01(2006) - Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
F494-05 - Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
F497-00(2009) - Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
F498-77(2006) - Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
F502-08 - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F504-05 - Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
F505-87(2006) - Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
F509-86(2009) - Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes
F510-93(2008) - Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
F511-04 - Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
F513-00(2007) - Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players
F519-08 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
F520-97(2004) - Standard Test Method for Environmental Resistance of Aerospace Transparencies
F521-83(2004) - Standard Test Methods for Bond Integrity of Transparent Laminates
F539-01(2007) - Standard Practice for Fitting Athletic Footwear
F548-09 - Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F549-85(2004) - Standard Terminology Relating to Carbonless Copy Products
F555-01(2006) - Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
F556-88(2006) - Standard Test Method for Curl of Carbonless Copy Papers
F558-06 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
F571-87(2008) - Standard Practice for Installation of Exit Devices in Security Areas
F577-03(2009) - Standard Test Method for Particle Size Measurement of Dry Toners
F589-06 - Standard Consumer Safety Specification for Non-Powder Guns
F590-05 - Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
F595-01(2005) - Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
F596-09 - Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
F597-83(2008) - Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
F598-00(2009) - Standard Practice for Determining the Resistance of Carbonless Papers to Capsular Damage
F605-88(2006) - Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set
F608-09 - Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
F609-05 - Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
F627-99(2008) - Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
F655-06 - Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing
F659-06 - Standard Specification for Skier Goggles and Faceshields
F685-96(2006) - Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
F686-94(2006) - Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
F693-01(2007) - Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
F695-01(2009) - Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
F697-00(2006) - Standard Practice for Care and Use of Athletic Mouth Protectors
F706-96(2006) - Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
F710-08 - Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
F717-89(2006) - Standard Specification for Football Helmets
F733-09 - Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F734-95(2006) - Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F735-06 - Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F736-95(2006) - Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F747-06 - Standard Terminology Relating to Amusement Rides and Devices
F760-93(2006) - Standard Specification for Food Service Equipment Manuals
F766-82(2005) - Standard Test Method for Melting Point of Waxes
F767-98(2008) - Standard Test Method for Image Stability of Chemical Carbonless Paper to Light
F770-06a - Standard Practice for Ownership and Operation of Amusement Rides and Devices
F779-93(2006) - Standard Test Method for Torsion Characteristic of Alpine Skis
F780-93a(2006) - Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
F790-08 - Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F791-96(2008) - Standard Test Method for Stress Crazing of Transparent Plastics
F792-08 - Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F793-07 - Standard Classification of Wall Covering by Use Characteristics
F801-96(2008) - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
F802-83(2003) - Standard Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction
F803-03 - Standard Specification for Eye Protectors For Selected Sports
F807-83(2009) - Standard Practice for Determining Resolution Capability of Office Copiers
F820-06 - Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
F832-90(2008) - Standard Classification for Security Seals
F833-09 - Standard Consumer Safety Performance Specification for Carriages and Strollers
F834-84(2008) - Standard Consumer Safety Specification for Toy Chests
F839-83(2006) - Standard Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use
F843-98(2008) - Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink
F846-92(2009) - Standard Guide for Testing Performance of Amusement Rides and Devices
F851-87(2005) - Standard Test Method for Self-Rising Seat Mechanisms
F852-08 - Standard Specification for Portable Gasoline Containers for Consumer Use
F853-05 - Standard Practice for Maintenance Procedures for Amusement Rides and Devices
F854-83(2008) - Standard Test Method for Cleanliness of Carbon Paper
F857-07 - Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
F858-07 - Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
F859-09 - Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
F860-07 - Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
F861-94(2008)e1 - Standard Specification for Commercial Dishwashing Racks
F862-93(2002) - Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F869-01(2007) - Standard Terminology Relating to Athletic Shoes and Biomechanics
F874-98(2008) - Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
F875-09 - Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
F883-04 - Standard Performance Specification for Padlocks
F884-01(2006) - Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
F888-06 - Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
F893-05a - Standard Guide for Inspection of Amusement Rides and Devices
F904-98(2008) - Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
F909-94a(2006) - Standard Terminology Relating to Printers
F910-04 - Standard Specification for Face Guards for Youth Baseball
F917-91(2008)e1 - Standard Specification for Commercial Food Waste Disposers
F918-09 - Standard Specification for Noncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product)
F919-05 - Standard Specification for Slicing Machines, Food, Electric
F922-01(2006) - Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
F924-90(2009) - Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
F925-02(2008) - Standard Test Method for Resistance to Chemicals of Resilient Flooring
F926-02(2007) - Standard Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use
F935-00(2009) - Standard Test Method for Comparing Cover-Up Correction Media
F939-06 - Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings
F942-02(2008) - Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F945-06 - Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F946-85(2004) - Standard Guide for Establishing Security Seal Control and Accountability Procedures
F952-08 - Standard Specification for Mixing Machines, Food, Electric
F953-08 - Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
F963-08 - Standard Consumer Safety Specification for Toy Safety
F967-03 - Standard Practice for Security Engineering Symbols
F970-07 - Standard Test Method for Static Load Limit
F974-06 - Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output
F976-08 - Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
F977-07 - Standard Consumer Safety Specification for Infant Walkers
F995-09 - Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer
F1004-09 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
F1015-03(2009) - Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
F1021-95(2007) - Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
F1022-06 - Standard Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type
F1023-99(2004) - Standard Specification for Dispensers, Powdered Iced Tea
F1033-00(2004) - Standard Test Method for Comparing Lift-Off Correction Media
F1037-05 - Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
F1038-02(2006) - Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
F1042-87(2009) - Standard Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers
F1045-07 - Standard Performance Specification for Ice Hockey Helmets
F1047-04 - Standard Specification for Frying and Braising Pans, Tilting Type
F1050-87(2005) - Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
F1051-00(2009) - Standard Test Method for Comparing Multistrike Film Ribbons
F1061-08 - Standard Specification for Ski Binding Test Devices
F1062-97(2008) - Standard Test Method for Verification of Ski Binding Test Devices
F1063-09 - Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
F1064-07 - Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
F1066-04 - Standard Specification for Vinyl Composition Floor Tile
F1080-93(2008) - Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F1081-97(2003)e1 - Standard Specification for Competition Wrestling Mats
F1090-06 - Standard Classification for Bank and Mercantile Vault Construction
F1104-02(2008) - Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1105-09 - Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1107-04 - Standard Terminology Relating to Snowboarding
F1110-09 - Standard Test Method for Sandwich Corrosion Test
F1111-08b - Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1113-87(2005)e1 - Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1114-06 - Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
F1115-95(2008)e1 - Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1125-87(2006) - Standard Terminology of Image Quality in Impact Printing Systems
F1126-08 - Standard Specification for Food Cutters (Electric)
F1140-07 - Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
F1141-93(2009) - Standard Specification for Wallcovering
F1148-09 - Standard Consumer Safety Performance Specification for Home Playground Equipment
F1150-06 - Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
F1151-88(2008) - Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
F1157-04 - Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
F1158-94(2008) - Standard Guide for Inspection and Evaluation of Tampering of Security Seals
F1159-03a - Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1162-02 - Standard Specification for Pole Vault Landing Systems
F1163-04a - Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
F1164-97(2009)e1 - Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F1165-98(2004) - Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
F1169-07 - Standard Specification for Full-Size Baby Crib
F1174-01(2006) - Standard Practice for Using a Personal Computer Printer as a Test Instrument
F1175-88(2006) - Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
F1181-09 - Standard Test Method for Measuring Binocular Disparity in Transparent Parts
F1193-06 - Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
F1202-06 - Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F1203-06 - Standard Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
F1206-94(2005) - Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers
F1217-03 - Standard Specification for Cooker, Steam
F1225-99(2008) - Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
F1232-98(2008) - Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons
F1233-08 - Standard Test Method for Security Glazing Materials And Systems
F1235-03(2008) - Standard Consumer Safety Specification for Portable Hook-On Chairs
F1237-09 - Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing
F1240-01(2009) - Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
F1247-89(2005) - Standard Specification for Intrusion Resistant Generic Vault Structures
F1249-06 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F1250-00(2006) - Standard Safety Specification for Stationary Exercise Bicycles
F1252-08 - Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
F1265-03a(2008) - Standard Test Method for Resistance to Impact for Resilient Floor Tile
F1275-03(2008) - Standard Test Method for Performance of Griddles
F1278-96(2008) - Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
F1284-09 - Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
F1292-04 - Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment
F1294-97a(2009) - Standard Terminology Relating to Automatic Identification Hard Copy Printing Systems
F1303-04 - Standard Specification for Sheet Vinyl Floor Covering with Backing
F1304-08 - Standard Test Method for Deflection of Resilient Floor Tile
F1305-94(2002) - Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses
F1306-90(2008) - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1307-02(2007) - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
F1308-98(2008) - Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1313-90(2005) - Standard Specification for Volatile N-Nitrosamine Levels in Rubber Nipples on Pacifiers
F1316-90(2008) - Standard Test Method for Measuring the Transmissivity of Transparent Parts
F1317-98(2007) - Standard Test Method for Calibration of Microwave Ovens
F1318-90(2009) - Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
F1319-94(2005) - Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
F1320-01(2006) - Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
F1326-02(2006) - Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
F1334-08 - Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
F1344-04(2009)e1 - Standard Specification for Rubber Floor Tile
F1346-91(2003) - Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
F1349-08 - Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
F1351-96(2008) - Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems
F1352-08 - Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
F1360-06 - Standard Specification for Ovens, Microwave, Electric
F1361-07 - Standard Test Method for Performance of Open Deep Fat Fryers
F1362-09 - Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F1363-07 - Standard Guide for Reduction of Risk of Injury for Archery Overdraws
F1371-04(2009) - Standard Specification for Vegetable Peeling Machines, Electric
F1405-08 - Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method
F1409-00(2005)e1 - Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
F1410-98(2006) - Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
F1411-01(2006) - Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
F1416-96(2008) - Standard Guide for Selection of Time-Temperature Indicators
F1423-09 - Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
F1424-92(2006) - Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners
F1425-06 - Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
F1427-07 - Standard Consumer Safety Specification for Bunk Beds
F1434-97(2008) - Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer
F1435-08 - Standard Specification for Designation of the Balance Point Location for Archery Arrows
F1436-07 - Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
F1442-92(2009) - Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
F1443-93(2009) - Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
F1444-00(2009) - Standard Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method
F1445-00(2009) - Standard Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper
F1446-08 - Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
F1447-06 - Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
F1448-93a(2006) - Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
F1450-05 - Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities
F1454-99(2008) - Standard Practice for Comparing Correctable Film Ribbons
F1457-94b(2006) - Standard Terminology Relating to Laser Printers
F1459-06 - Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F1465-03 - Standard Guide for Selection of Security Control Systems
F1468-04a - Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
F1478-06 - Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
F1482-04(2009)e1 - Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
F1484-05 - Standard Test Methods for Performance of Steam Cookers
F1486-96(2008) - Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)
F1487-07ae1 - Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
F1492-08 - Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
F1495-05 - Standard Specification for Combination Oven Electric or Gas Fired
F1496-99(2005)e1 - Standard Test Method for Performance of Convection Ovens
F1500-98(2008) - Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
F1509-94(2009) - Standard Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges
F1514-03(2008) - Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
F1515-03(2008) - Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
F1516-08 - Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
F1519-98(2008) - Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
F1520-94(2008) - Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
F1521-03(2008) - Standard Test Methods for Performance of Range Tops
F1534-05 - Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F1543-96(2007) - Standard Specification for Shock Attenuation Properties of Fencing Surfaces
F1544-04 - Standard Specification for Determining the Rating Velocities of an Archery Bow
F1550-05 - Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
F1551-09 - Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
F1561-03(2008) - Standard Performance Requirements for Plastic Chairs for Outdoor Use
F1562-95(2005) - Standard Guide for Use-Oriented Foreign Language Instruction
F1566-08 - Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
F1568-08 - Standard Specification for Food Processors, Electric
F1571-95(2008) - Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)
F1577-05 - Standard Test Methods for Detention Locks for Swinging Doors
F1587-99(2005) - Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
F1592-05 - Standard Test Methods for Detention Hollow Metal Vision Systems
F1601-01(2006) - Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
F1602-07 - Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
F1603-07 - Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
F1604-09 - Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
F1605-95(2007) - Standard Test Method for Performance of Double-Sided Griddles
F1608-00(2009) - Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
F1614-99(2006) - Standard Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear
F1615-95(2004) - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
F1623-96(2008) - Standard Terminology Relating to Thermal Imaging Products
F1624-06 - Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1625-00(2008) - Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers
F1632-03 - Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
F1637-09 - Standard Practice for Safe Walking Surfaces
F1639-05 - Standard Test Method for Performance of Combination Ovens
F1642-04 - Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F1643-05 - Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1645/F1645M-07 - Standard Test Method for Water Migration in Honeycomb Core Materials
F1646-05e1 - Standard Terminology Relating to Safety and Traction for Footwear
F1647-02a - Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes
F1648-95(2008) - Standard Test Methods for Archery Bowstring Component-Serving String Material
F1676-96(2003) - Standard Specification for Basic Tumbling Mats
F1692-01(2006) - Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
F1694-09 - Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
F1695-03(2008) - Standard Test Method for Performance of Underfired Broilers
F1696-07 - Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines
F1699-96(2008) - Standard Classification for Passive Fiber Optic Seals
F1700-04 - Standard Specification for Solid Vinyl Floor Tile
F1702-96(2002)e1 - Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
F1703-04 - Standard Guide for Ice Hockey Playing Facilities
F1704-05 - Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
F1720-06 - Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
F1721-04(2009) - Standard Practices for Determining Stability of Direct Thermal Imaging Products
F1722-09 - Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
F1749-09 - Standard Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
F1750-05 - Specification for Paintball Marker Threaded-Propellant Source Interface
F1752-96(2006) - Standard Test Method for Archery Bow Component-Cord Material
F1753-96(2006) - Standard Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows
F1758-05 - Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1776-09 - Standard Specification for Eye Protective Devices for Paintball Sports
F1777-02 - Standard Practice for Paintball Field Operation
F1782-97(2008) - Standard Practice for Amount of Ink Deposit on Fabric Type Ribbons
F1784-97(2008) - Standard Test Method for Performance of a Pasta Cooker
F1785-97(2008) - Standard Test Method for Performance of Steam Kettles
F1786-97(2004)e1 - Standard Test Method for Performance of Braising Pans
F1787-98(2008) - Standard Test Method for Performance of Rotisserie Ovens
F1815-06 - Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Putting Green and Sports Turf Root Zones
F1816-97(2004) - Standard Safety Specification for Drawstrings on Children's Upper Outerwear
F1817-09 - Standard Test Method for Performance of Conveyor Ovens
F1821-09 - Standard Consumer Safety Specification for Toddler Beds
F1827-97(2006) - Standard Terminology Relating to Food Service Equipment
F1832-07 - Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
F1833-97(2006) - Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
F1838-98(2008) - Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use
F1849-07 - Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)
F1851-98(2009) - Standard Practice for Bar Code Verification
F1853-03 - Standard Test Method for Measuring Sleeping Bag Packing Volume
F1856-04(2009) - Standard Practice for Determining Toner Usage for Printer Cartridges
F1857-01(2006) - Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom
F1858-98(2008) - Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
F1859-04(2009)e1 - Standard Specification for Rubber Sheet Floor Covering Without Backing
F1860-04(2009)e1 - Standard Specification for Rubber Sheet Floor Covering With Backing
F1861-08 - Standard Specification for Resilient Wall Base
F1863-98(2004) - Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
F1864-05 - Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F1869-04 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F1870-05 - Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
F1880-98(2004) - Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
F1881-09 - Standard Test Method for Measuring Baseball Bat Performance Factor
F1882-06 - Standard Specification for Residential Basketball Systems
F1884-04 - Standard Test Method for Determining Residual Solvents in Packaging Materials
F1886/F1886M-09 - Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
F1887-09 - Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
F1888-09 - Test Method for Compression-Displacement of Baseballs and Softballs
F1889-05 - Standard Guide for Straightness Measurement of Arrow Shafts
F1890-09 - Standard Test Method for Measuring Softball Bat Performance Factor
F1898-08 - Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
F1899-98(2008)e1 - Standard Specification for Food Waste Pulper Without Waterpress Assembly
F1900-98(2004) - Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator
F1912-98(2009) - Standard Specification for Safety of Bean Bag Chairs
F1913-04 - Standard Specification for Vinyl Sheet Floor Covering Without Backing
F1914-07 - Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
F1915-05 - Standard Test Methods for Glazing for Detention Facilities
F1917-08 - Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
F1918-04 - Standard Safety Performance Specification for Soft Contained Play Equipment
F1919-03 - Standard Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired
F1920-07 - Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines
F1921-98(2004) - Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
F1927-07 - Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
F1928-98(2004)e1 - Standard Safety Guide for Consumer Recreational Use of Fun-Karts
F1929-98(2004) - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
F1931-98(2004) - Standard Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces
F1932-98(2004) - Standard Test Method for Measuring Sleeping Bag Loft
F1933-98(2004) - Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
F1934-98(2004) - Standard Test Method for Weighing a Backpacking or Mountaineering Tent
F1935-01(2007) - Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
F1936-07e1 - Standard Specification for Shock-Absorbing Properties of North American Football Field Playing Systems as Measured in the Field
F1937-04 - Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
F1938-98(2004) - Guide for Safer Use of Movable Soccer Goals
F1942-98(2003) - Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers
F1943-98(2008) - Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products—Atlantek Method
F1944-98(2008) - Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers
F1945-05 - Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
F1946-04 - Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
F1951-09b - Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
F1952-09 - Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
F1953-99(2003) - Standard Guide for Construction and Maintenance of Grass Tennis Courts
F1955-99(2005) - Standard Test Method for Flammability of Sleeping Bags
F1957-99(2004) - Standard Test Method for Composite Foam Hardness-Durometer Hardness
F1963-05 - Standard Specification for Deep-Fat Fryers, Gas or Electric, Open
F1964-99(2005) - Standard Test Method for Performance of Pressure and Kettle Fryers
F1965-99(2005) - Standard Test Method for Performance of Deck Ovens
F1966-03(2008) - Standard Specification for Dough Divider and Rounding Machines
F1967-08a - Standard Consumer Safety Specification for Infant Bath Seats
F1972-05 - Standard Guide for Terminology Relating to Candles and Associated Accessory Items
F1975-09 - Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
F1976-06 - Standard Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test
F1977-04 - Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
F1979-09 - Standard Specification for Paintballs Used in the Sport of Paintball
F1980-07 - Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
F1988-99(2008) - Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
F1989-05 - Specification for Cooking Fire Suppression Blankets
F1991-99(2005) - Standard Test Method for Performance of Chinese (Wok) Ranges
F2006-08 - Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
F2007-07a - Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
F2011-02e1 - Standard Specification for Safety and Performance of Fun-Karts
F2012-08 - Standard Consumer Safety Performance Specification for Stationary Activity Centers
F2013-05 - Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
F2022-01(2007) - Standard Test Method for Performance of Booster Heaters
F2029-08 - Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
F2030-08 - Standard Specification for Paintball Cylinder Burst Disk Assemblies
F2031-05 - Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
F2032-06 - Standard Specification for Helmets Used for BMX Cycling
F2034-08 - Standard Specification for Sheet Linoleum Floor Covering
F2035-00(2006) - Standard Practice for Measuring the Dark Stability of Ink Jet Prints
F2036-05e1 - Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
F2037-00(2006) - Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
F2040-06 - Standard Specification for Helmets Used for Recreational Snow Sports
F2043-09 - Standard Classification for Bicycle Usage
F2048-00(2009) - Standard Practice for Reporting Slip Resistance Test Results
F2050-08 - Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers
F2054-07 - Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
F2055-09 - Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
F2057-09a - Standard Safety Specification for Chests, Door Chests, and Dressers
F2058-07 - Standard Specification for Candle Fire Safety Labeling
F2060-00(2005) - Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
F2075-04e1 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F2078-08a - Standard Terminology Relating to Hydrogen Embrittlement Testing
F2085-09 - Standard Consumer Safety Specification for Portable Bed Rails
F2088-08ae1 - Standard Consumer Safety Specification for Infant Swings
F2089-01(2007) - Standard Guide for Language Interpretation Services
F2090-08 - Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
F2092-01(2007) - Standard Specification for Convection Oven Gas or Electric
F2093-06 - Standard Test Method for Performance of Rack Ovens
F2095-07e1 - Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
F2096-04 - Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
F2097-08 - Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
F2105-06 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
F2106-03 - Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
F2107-08 - Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
F2108-06 - Standard Practice for Inspection of Transparent Parts by Prism
F2109-01(2005) - Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2111-01a(2005)e1 - Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
F2115-05 - Standard Specification for Motorized Treadmills
F2117-01 - Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
F2120-06 - Standard Practice for Testing Treestand Load Capacity
F2121-05 - Standard Practice for Treestand Labels
F2122-08 - Standard Practice for Treestand Safety Devices
F2123-09 - Standard Practice for Treestand Instructions
F2124-05 - Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity
F2125-09 - Standard Test Method for Treestand Static Stability and Adherence
F2126-06 - Standard Test Method for Treestand Static Load Capacity
F2128-09 - Standard Test Method for Treestand Repetitive Loading Capability
F2137-09 - Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
F2140-01(2007) - Standard Test Method for Performance of Hot Food Holding Cabinets
F2141-07 - Standard Test Method for Performance of Self-Serve Hot Deli Cases
F2142-01(2007) - Standard Test Method for Performance of Drawer Warmers
F2143-04 - Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
F2144-09 - Standard Test Method for Performance of Large Open Vat Fryers
F2153-07 - Standard Test Method for Measurement of Backpack Capacity
F2155-01 - Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
F2156-06 - Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F2157-09 - Standard Specification for Synthetic Surfaced Running Tracks
F2167-05b - Standard Consumer Safety Specification for Infant Bouncer Seats
F2169-02(2008) - Standard Specification for Resilient Stair Treads
F2170-09 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
F2175-07 - Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use
F2179-02(2007) - Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
F2184-02 - Standard Guide for Installation of Paintball Barrier Netting
F2194-07ae1 - Standard Consumer Safety Specification for Bassinets and Cradles
F2195-07 - Standard Specification for Linoleum Floor Tile
F2199-02(2008) - Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
F2201-02e1 - Standard Consumer Safety Specification for Utility Lighters
F2202-02(2007) - Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
F2203-02(2007) - Standard Test Method for Linear Measurement Using Precision Steel Rule
F2208-08 - Standard Safety Specification for Residential Pool Alarms
F2216-05 - Standard Specification for Selectorized Strength Equipment
F2217-02(2007) - Standard Practice for Coating/Adhesive Weight Determination
F2219-09 - Standard Test Methods for Measuring High-Speed Bat Performance
F2220-02(2009) - Standard Specification for Headforms
F2223-09 - Standard Guide for ASTM Standards on Playground Surfacing
F2225-09a - Standard Safety Specification for Consumer Trampoline Enclosures
F2226-03 - Standard Practice for Determining the Adhesion of Prints and Laminating Films
F2227-02(2007) - Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO₂ Tracer Gas Method
F2228-02(2007) - Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO₂ Tracer Gas Method
F2232-09 - Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
F2234-08 - Standard Specification for Spill Resistant Fueling Systems for Portable Fuel Containers for Consumer Use
F2236-09a - Standard Consumer Safety Specification for Soft Infant Carriers
F2237-03(2008) - Standard Test Method for Performance of Upright Overfired Broilers
F2238-09 - Standard Test Method for Performance of Rapid Cook Ovens
F2239-03e1 - Standard Test Method for Performance of Conveyor Broilers
F2240-08 - Standard Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft
F2241-05a(2008) - Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft
F2242-05(2008) - Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
F2243-05 - Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft
F2244-08 - Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft
F2245-09 - Standard Specification for Design and Performance of a Light Sport Airplane
F2247-03 - Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2248-03 - Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
F2250-03(2008) - Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2251-03(2008) - Standard Test Method for Thickness Measurement of Flexible Packaging Material
F2252-03(2008) - Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
F2264-09 - Standard Consumer Safety Specification for Non-Powered Scooters
F2268-03 - Standard Specification for Bicycle Serial Numbers
F2269-03 - Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
F2270-04 - Standard Guide for Construction and Maintenance of Warning Track Areas on Sports Fields
F2271-03 - Standard Specification for Paintball Marker Barrel Blocking Devices
F2272-08 - Standard Specification for Paintball Markers
F2273-03 - Standard Test Methods for Bicycle Forks
F2274-03 - Standard Specification for Condition 3 Bicycle Forks
F2275-08 - Standard Practice for Treestand Manufacturer Quality Assurance Program
F2276-09 - Standard Specification for Fitness Equipment
F2277-03 - Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
F2278-03 - Standard Test Method for Evaluating Paintball Barrier Netting
F2279-06 - Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft
F2285-04 - Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
F2286-05 - Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
F2291-09a - Standard Practice for Design of Amusement Rides and Devices
F2292-03(2008) - Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub
F2293-03(2008) - Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers
F2294-03(2009) - Standard Practice for Determining the Writeability of Print Media
F2295-06 - Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft
F2296-04 - Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
F2316-08 - Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft
F2317/F2317M-05(2009) - Standard Specification for Design of Weight-Shift-Control Aircraft
F2322-03 - Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
F2324-03(2009) - Standard Test Method for Prerinse Spray Valves
F2326-04(2009) - Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
F2333-04 - Standard Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface
F2334-09 - Standard Guide for Above Ground Public Use Skatepark Facilities
F2336-05 - Standard Guide for Roller Hockey Playing Facilities
F2337-08 - Standard Test Method for Treestand Fall Arrest System
F2338-09 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
F2339-06(2009) - Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
F2340-05 - Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
F2341-05 - Standard Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
F2342/F2342M-09 - Standard Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
F2343-09 - Standard Test Method for Livestock, Meat, and Poultry Evaluation Devices
F2348-04 - Standard Performance Specification for Privacy Padlocks
F2352-09 - Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
F2353-05(2008) - Standard Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft
F2354-05b(2008) - Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
F2355-05a(2008) - Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
F2356-05a(2008) - Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
F2366-05 - Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
F2367-04a - Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use
F2368-04 - Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use
F2369-04 - Standard Safety Specification for Non-Integral Firearm Locking Devices
F2372-04 - Standard Consumer Safety Performance Specification for Shopping Carts
F2373-08 - Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
F2374-07a - Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
F2375-09 - Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
F2376-08 - Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
F2379-04 - Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
F2380-04 - Standard Test Method for Performance of Conveyor Toasters
F2387-04 - Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
F2388-09 - Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
F2391-05 - Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
F2396-04 - Standard Guide for Construction of High Performance Sand-Based Rootzones for Sports Fields
F2397-04a - Standard Specification for Protective Headgear Used in Martial Arts
F2398-04e1 - Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
F2400-06 - Standard Specification for Helmets Used in Pole Vaulting
F2401-04 - Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
F2406-04 - Standard Practice for Determining Yield of Solid Ink Sticks
F2412-05 - Standard Test Methods for Foot Protection
F2413-05 - Standard Specification for Performance Requirements for Foot Protection
F2415-09 - Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft
F2416-06e1 - Standard Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices
F2417-09 - Standard Specification for Fire Safety for Candles
F2419-05 - Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
F2420-05 - Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
F2421-05 - Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage
F2425-05a(2009) - Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
F2426-05a(2008) - Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft
F2427-05a(2008) - Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
F2429-05 - Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
F2432-04 - Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
F2439-06 - Standard Specification for Headgear Used in Soccer
F2440-04 - Standard Specification for Indoor Wall/Feature Padding
F2441-05 - Standard Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks
F2442-07 - Standard Guide for Layout of Ice Arena
F2447-05(2009) - Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
F2448-04(2009) - Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
F2449-09 - Standard Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft
F2452-04 - Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods-Score/Tape and Cross Hatch
F2456-04(2009) - Standard Specification for Youth-Resistant Firearms Containers (YRFCs)
F2457-05(2009) - Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft
F2460-07 - Standard Practice for Special Requirements for Bumper Boats
F2461-09 - Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
F2463-06 - Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems
F2469-05 - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
F2471-08 - Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
F2472-05 - Standard Test Method for Performance of Staff-Serve Hot Deli Cases
F2473-05 - Standard Test Method for Performance of Water-Bath Rethermalizers
F2474-05 - Standard Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
F2475-05 - Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
F2476-05 - Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co ₂TR) Through Barrier Materials Using An Infrared Detecto
F2479-07 - Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
F2480-06 - Standard Guide for In-ground Concrete Skatepark
F2483-05 - Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
F2494-05 - Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment
F2495-05 - Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
F2496-05 - Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
F2497-05 - Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
F2498-05 - Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method
F2506-07 - Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers
F2507-05 - Standard Specification for Recreational Airpark Design
F2517-09 - Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
F2518-06 - Standard Guide for Use of a Residential Swimming Pool, Spa, and Hot Tub Safety Audit to Prevent Unintentional Drowning
F2519-05 - Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
F2520-05 - Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
F2521-09 - Standard Specification for Heavy-Duty Ranges, Gas and Electric
F2530-05 - Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
F2531-05 - Standard Test Method for Load Capacity of Treestand Seats
F2538-07a - Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
F2542-05 - Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
F2544-06e1 - Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
F2546-07 - Standard Test Method for Snowboard Step-in Bindings
F2549-09a - Standard Consumer Safety Specification for Frame Child Carriers
F2553-08 - Standard Specification for Warnings on Refillable CO₂ Cylinders Used In the Sport of Paintball
F2555-06 - Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges-Continuous Printing Method
F2559-06 - Standard Guide for Writing a Specification for Sterilizable Peel Pouches
F2563-06 - Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
F2564-06 - Standard Specification for Design and Performance of a Light Sport Glider
F2568-06 - Standard Test Method for Measurement of Sleeping Bags
F2569-07 - Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
F2573-06 - Standard Specification for Low Velocity Resilient Material Projectile
F2574-06 - Standard Specification for Low Velocity Projectile Marker
F2575-06 - Standard Guide for Quality Assurance in Translation
F2598-09 - Standard Consumer Safety Specification for Clothing Storage Chests
F2601-09 - Standard Specification for Fire Safety for Candle Accessories
F2607-08 - Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
F2608-07 - Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
F2609-07 - Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
F2613-09 - Standard Consumer Safety Specification for Children's Folding Chairs
F2622-08e1 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
F2626-07 - Standard Terminology for Light Sport Aircraft
F2632-07 - Standard Practice for Determining the Toner Usage for Color Printer Cartridges
F2638-07 - Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
F2640-09 - Standard Consumer Safety Specification for Booster Seats
F2641-08 - Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
F2642-08 - Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
F2643-09 - Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
F2644-07 - Standard Test Method for Performance of Commercial Patio Heaters
F2645-07 - Standard Specification for Bun Slicing Machines
F2646-07 - Standard Specification for Bread Slicing Machines
F2647-07 - Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
F2650-07 - Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
F2651-08b - Standard Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
F2653-07 - Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
F2654-07 - Standard Specification for Low Energy Air Gun (LEAG) Warnings
F2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers
F2666-07 - Standard Specification for Aboveground Portable Pools for Residential Use
F2670-09 - Standard Consumer Safety Specification for Infant Bath Tubs
F2673-08 - Standard Safety Specification for Special Tip-Resistant Movable Soccer Goals
F2679-07 - Standard Specification for 6 mm Projectiles Used with Low Energy Air Guns
F2680-09 - Standard Specification for Manually Operated Front Wheel Retention Systems for Bicycles
F2681-08 - Standard Specification for Body Protectors Used in Equine Racing
F2687-07 - Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
F2710-08 - Standard Consumer Safety Performance Specification for Commercial Cribs
F2711-08 - Standard Test Methods for Bicycle Frames
F2713-09 - Standard Specification for Eye Protectors for Field Hockey
F2714-08 - Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
F2717-08 - Standard Guide for Development of an Independent Third-Party Verification
F2727-09 - Standard Guide for Manufacturers for Labeling Headgear Products
F2734-08 - Standard Practice for Testing the Shelf Life of Ink Jet Printer Cartridges
F2746-09 - Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
F2748-08 - Standard Specification for Low Energy Air Guns (Less Than 1 Joule)
F2756-09 - Standard Test Method for Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
F2760-09 - Standard Practice for Testing Ink Jet Cartridge Latency (Start-Up)
F2765-09 - Standard Specification for Total Lead Content in Synthetic Turf Fibers
F2772-09 - Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems
F2773-09 - Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
F2796-09 - Standard Specification for Hot Food Holding Tables