LoginSite MapOnline SupportContactPrivacy PolicyIP Policy
Site Search
 
View Shopping Cart

Books & Journals / Journal of ASTM International (JAI) / Citation Page/

Volume 2, Issue 3 (March 2005)

Online ISSN: 1546-962X
Published Online: 28 February 2005
Page Count: 13

Click here to download this paper now for $25

View License Agreement

Field Validation of Superpave Shear Test on NCAT Test Track

Zhang, J
National Center for Asphalt Technology, Auburn, AL

Xie, H
Auburn University, Auburn, AL

Kandhal, PS
National Center for Asphalt Technology, Auburn, AL

Powell, RD
National Center for Asphalt Technology, Auburn, AL

(Received 1 December 2003; accepted 19 November 2004)
JOURNAL JAI
Abstract
When the National Center for Asphalt Technology Test Track was built in 2000, one of the primary objectives was to determine the ability of a number of laboratory tests to predict the permanent deformation of various mixtures. Repeated Shear at Constant Height (RSCH) was included as one of the tests in the laboratory study. The subject of this paper is field validation of the Superpave Shear Tester (SST) based on the field rutting data from the Test Track. Permanent shear strain, slope of the deformation rate, repetitions to a certain strain level, and shear modulus were the parameters evaluated for RSCH. The sensitivity of SST test to asphalt binder type in the various test track sections was analyzed. The relationship between RSCH test results and field rut depth was poor. This was partly due to the good quality of the track construction, thick pavement structure, and mild summers during the loading of the 2000 track, which did not cause any significant rutting. The sensitivity study indicated that PG 76-22 binder performed better than the PG 67-22 binder in the RSCH test. The criteria developed by the Asphalt Institute seem to be in a reasonable range.

Keywords:
asphalt concrete, HMA, NCAT Test Track, permanent deformation, Repeated Shear at Constant Height, rutting, rutting prediction, shear, SST, Superpave mixture, Superpave Shear Test

Paper ID: JAI12281
DOI: 10.1520/JAI12281

ASTM International is a member of CrossRef.
Author Zhang, J Affiliation National Center for Asphalt Technology, Auburn, AL Author Xie, H Affiliation Auburn University, Auburn, AL Author Kandhal, PS Affiliation National Center for Asphalt Technology, Auburn, AL Author Powell, RD Affiliation National Center for Asphalt Technology, Auburn, AL Title: Field Validation of Superpave Shear Test on NCAT Test Track Symposium: Performance of Hot Mix Asphalt (HMA), including Fundamental and Empirical Procedures, 2003-12-9
Committee: D04 on Road and Paving Materials