ASTM E124

This specification covers the general requirements for the components that comprise the apparatus used for the weighing and drying operations in the laboratory practice of microchemical analysis. The components covered here are the following: combustion boats; weighing bottles, cup, and tubes; spatulas; forceps; tare flasks; metal cooling block; metal crucible container with glass cover; and micro glass desiccator with metal insert.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers apparatus used for weighing and drying operations in microchemical laboratory practice.

1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents may be approximate.

Note1—This specification was originally developed by the Committee on Microchemical Apparatus, Division of Analytical Chemistry, American Chemical Society.

2. Referenced Documents

ASTM Standards
E1133 Practice for Performance Testing of Packaged Laboratory Apparatus United States Government Procurement
E1157 Specification for Sampling and Testing Laboratory Glassware
E671 Specification for Maximum Permissible Thermal Residual Stress in Annealed Laboratory Apparatus
E920 Specification for Commercially Packaged Laboratory Apparatus
E921 Specification for Export Packaged Laboratory Apparatus

Index Terms

apparatus; microchemical; weighing and drying; ICS Number Code 71.040.20 (Laboratory ware and related apparatus)

Citing ASTM Standards

[Back to Top]