ASTM WK70807
New Practice for the On-Site Inspection of Installed Board and Wrap Type Fireproofing
1. Scope
This Practice provides a standard set of guidelines for conducting and reporting on inspections of installed board and wrap type fireproofing materials applied to structural steel or other substrates. This Practice establishes procedures to inspect products and systems, including methods for field verification and inspection. This Practice addresses all types of board and wrap type materials applied to structural steel and other substrates. This Practice provides an inspector, employed by an inspection agency, various methods to verify that required board and wrap type fireproofing materials have been installed to the tested and listed system and manufacturers installation instructions in addition to project requirements.Keywords
Insulation; Fireproofing; Structural Steel FireproofingRationale
Currently, there is no document that has been produced in the industry that is a consensus of the fireproofing industry manufacturers and contractors. The ASTM Standard proposed creates a key document that has been developed by manufacturers, contractors AND those inspection agencies that provide fireproofing inspections. ASTMs new document will provide in mandatory code acceptable language the method to inspect board and wrap type fireproofing systems. Architects will specify this standard as the inspections are mandated by Chapter 17 of the International Building Code.
Work Item Status
Date Initiated: 11-25-2019
Technical Contact: Samantha Peterson
Item: 002
Ballot: E06.21 (22-01)
Status: Will Reballot Item
Item: 010
Ballot: E06.21 (23-01)
Status: Will Reballot Item
Item: 002
Ballot: E06 (23-06)
Status: Will Reballot Item
Item: 010
Ballot: E06 (24-03)
Status: Negative Votes Need Resolution